Note some parts are shared wtih those also listed in the Amal TT, Amal RN or Amal GP sections.
If you have a requirement for an early carb part, or Norton Amal part not listed here - you can email us to enquire on sales@racingvincent.co.uk. We will consider manufacture of a difficult or hard to find part - providing there is likely to be a demand to cover setup and manufacturing costs
Parts to fit Amal and some Amac Road Model Carb Parts (i.e 276/289/Monobloc) - Information SectionProduct no.: 0136d Info9Listed here are reproduction parts to fit original Amal (and some Amac) roadgoing carburettors - i.e Type 76/276, 89/289, 376/389, Monobloc and Concentric carburettors, as well as some pre-Amal carb parts - i.e. Amac carbs fitted to Douglas models etc. Note some parts are shared wtih those also listed in the Amal TT, Amal RN or Amal GP sections. |
Norton OHV/SV Type - Flame Trap/Filter and Components to fit Amal 276 Carbs (see listing) - VariousProduct no.: 1205 30/109This is the distinctively shaped Air Intake bellmouth and filter assembly - as fitted only to Norton OHV and SV model Amal 76/276 type carburettors from the 1930s until the 1950's. We have had these bellmoouths, filters and spring clips manufactured to the original style and pattern and they can be purchased as a complete assembly (in either bare alloy or matt silver) or components. See detail listing for more information - and the different items available
|
Norton OHV/SV Type - Throttle Stop Assembly to fit Original Amal 276 Carbs (see listing) - SetProduct no.: 1147 15/186This is the clever and distinctive mechanism fitted to Norton roadgoing single cylinder models that were fitted with Amal 276 (seperate floatchamber type) carburettors, from the early 1930's to approximately 1955. This mechanism allowed the throttle to be lifted easily for cold running. The assembly consists of adjuster, adjustment block and screw and spring. This is the later type - with 1/4" BSW thread - see listing for more detail. Price is Per Assembly |
Chromed Outlet Ring/Stainless Bolt to Fit Orig Amal 276 Type Carbs - 1 5/16" Bore (Pair)Product no.: 1173 6/201+048(S)This listing is for a high quality reproduction of the 'lipped' and chromed Inlet Ring and distinctive shaped bolt that were fitted to Amal Type 76 and 276 Stub fitting carburettors, and locked the carburettor to the inllet stub. Both the ring and bolt are identical to the original patterns, with the inlet ring being chromed brass and the bolt in polished stainless steel. This item listing is for the smaller size ring - see listing detail for more size information. Price is per pair |
Chromed Outlet Ring/Stainless Bolt to Fit Orig Amal 276/289 Type Carbs - 1 7/16" Bore (Pair)Product no.: 1174 6/201+048(L)This listing is for a high quality reproduction of the 'lipped' and chromed Inlet Ring and distinctive shaped bolt that were fitted to Amal Type 76 /276 or Amal 86/286 Stub fitting carburettors, and locked the carburettor to the inllet stub. See listing for dimensions and model fitting. Price is for ring and bolt |
Profiled/Lipped Bolt to Fit Original Amal Clip Fitting Inlet Rings (i.e. 276/289 and TT/RN Clip)Product no.: 1175 4/0+048SSThis listing is for the distiinctive shouldered and profiled hex head bolt that fitted to the Inlet ring on Amal Type 76/276 and Type 86/286 Stub Fitting Carburettors - it having the important function of ensuring the carb was securly located to the inlet stub. These are CNC manufactured by us to the original design in stainless steel and the heads lightly polished. They were also used on Competition TT/RN clip fitting carburettors. Price is each |
TT/RN (and most Roadgoing Amal models) Throttle Needle ClipProduct no.: 0148 4/230Carburetter needle clip - as fitted to original Amal TT competition carbs as well as many roadgoing carbs - i.e. Amal 76/276, 79/289 and monobloc carburettors. Price each |
76b Type Throttle Needle - to fit Original Amal 76 and 276 Carbs (i.e. SV and OHV Singles) - EachProduct no.: 1139 6/065This is for a throttle needle to fit original Amal Type 76 (Pre-War), Type 276 carburettors - i.e. the type with seperate floatchamber fitted to most roadgoing Norton SV,OHV and CJ single cylinder models, up until the end of 1954, i.e pre-Monobloc. Price is Each |
29/289 Type Throttle Needle - to fit Original Amal 29 and 289 Carburettors (Road Carbs) - EachProduct no.: 1146 29/289This is for a throttle needle to fit original Amal Type 29 and 89 (Pre-War) and Type 289 carburettors - i.e. the type with seperate floatchamber, a slighlty bigger version of the 276. These were fitted to a number of marques in the 30's - 50's, most notably Vincent singles and twins, up until the end of 1954, i.e pre-Monobloc. Price is Each |
Top Ring Spring Clip - to fit original Amal 276/289 and Monobloc carbsProduct no.: 0947 4/235Nice quality top ring spring to fit original Amal 276/289 and Monobloc carbs - as per original part 4/235. This spring is retained by a top screw and stops the screw on top ring from unwinding in use. |
TT Throttle Cable Adjuster And Locknut (later generic type)Product no.: 0145 TT/3360/9- This is the throttle cable adjuster and locknut of the type sometimes fitted to later alloy top caps on later Amal TT and GP carbs - The thread size is 7/32 x 40tpi, which is slightly finer than on some original carbs, so please check. On some carb tops they are non threaded to accept this adjuster, which is a simple mod to the threaded type |
Throttle Twistgrip - Universal Cable - 37" Long: Adjuster in Middle of Cable: EachProduct no.: 1216 Cable01This listing is for a universal type throttle cable of 37^ in length, with nipples fitted either end - to fit most twistgrips and Amal carburettors. This cable type has an adjuster in the middle of the cable (about 6" below the twistgrip). Price is Each. |
Throttle Twistgrip - Universal Cable - 37" Long: - Plain Type (no adjusters) : EachProduct no.: 1217 Cable02This listing is for a universal type throttle cable of 37^ in length, with nipples fitted either end - to fit most twistgrips and Amal carburettors. This is the 'plain' cable type - i.e. there is no adjuster fitted along the cable length. See listing for more information. Price is Each. |
Throttle Cable - Spare Outer Cable Ferrule and Twistgrip Side Inner Cable Barrel: PairProduct no.: 1218 Cable03This listing is for a spare Throttle Cable (or choke/air/magneto type cable) outer cable ferrule, and a spare inner cable barrel of the type normally fitted on the twistgrip end of throttle cables. This item is useful if you have bought a throttle cable (see items 1216 and 1217) and need to then cut the cable to length or fit an adjuster. Price is per pair. |
Throttle Twistgrip - 'Top Hat' Cable Ferrule - Stainless Steel: EachProduct no.: 1178 ThrFerr1This very useful little item is a 'Top Hat' Ferrule - to fit original Doherty and other similar throttle twistgrips, which are not threaded at their cable end - and if you are using a throttle cable which has its threaded adjuster in the middle of the cable - therefore this 'Top Hat' ferrule will stop the cable sliding through the twistgrip hole. CNC manufactured by us in stainless steel. See item listing for more info. Price is each |
Motorcycle Carb/Brake/Clutch Cable Ferrules and Fittings - All Types (See listing)Product no.: 1223 Cable_Var1This is a Variable listing - showing a selection of motorcycle cable fittings - for those classic motorcycle restorer's that still like to make up their cables themselves. We offer here a selection of outer cable ferrules and inner cable bullets - most either as a pair or pack of 6. See Detail Listing for full list and more information |
TT Main Jets - New Main Jets to fit original Amal Carbs (i.e. TT/RN/GP/Monoblock/Concentric)Product no.: 0153 TT/3326TT Main Jets - Most sizes available but the following common Norton SOHC sizes kept in stock: 260/280 /310/320/350/370/400/420 /450/460/500/520 and 1300/1600 (methanol). Other sizes (including bigger methanol up to 1900) available to order. Email if you need more information or assistance. Note: TT main jets are also the same as those fitted to Amal RN and Amal GP carbs. |
Jet Key Tool for Fitting Amal Main JetsProduct no.: 0946 JetKeyUseful little box key spanner for fitting and unfitting main jets on most Amal carbs that used the standard type Amal Main Jets |
Castrol ValveMaster Plus - Lead Replacement Plus Octane Booster - 250ml BottleProduct no.: 0614 Octane1Castrol ValveMaster Plus - Lead Replacement Plus Octane Booster - 250ml Bottle can be shipped within 30 days |
14/024 Float Needle for Amal 276 and early TT FloatchambersProduct no.: 0613 14_024Float needle to fit the early (i.e. pre-war) Amal TT and Amal 276 type floatchambers - see listing detail for more information |
Driven Defender/Booster - Lead Replacement Plus Octane Booster - 295ml BottleProduct no.: 0685 Octane2Driven Defender and Booster - Lead Replacement Plus Octane Booster - 295ml Bottle can be shipped within 30 days |
Copper Float Chamber - Type 14 Type (To Original Amal Design - Fits Amal 276/289, Amal TT/RN) - EachProduct no.: 0458 TT14FloatNEW July 2023: We are now able to offer these copper floats - to fit original Amal carburettors fitted with the Type 14 Float chamber - this include roadgoing Amal Type 76, 276 and 289 carburettors and competition Amal TT and RN carburettors. These floats are manufactured in the same style as original Amal floats - with two spun copper halfs, soldered in the middle - and a brass tube running through the centre of a float, with a 'press spring' at the top. See detail listing for more information. Price is Each |
Float Tickler Kit - to fit Original Amal TT, RN and 276/289 Float Chambers - 4 PartsProduct no.: 0162 14/031(S)- 4 part tickler kit to fit original Amal TT, RN and 276/289 (standard size) float chambers. This float tickler fits the standard screw in (Type 76) floatchamber top - and is CNC machined by us to the original tickler design and dimensions. Satin nickel plated brass - as per the original items. See listing for more detail. |
Spring to fit all Original Amal Float Tickler Assemblies - EachProduct no.: 1110 14/031Spr- Tickler spring to fit all Amal seperate floatchamber tickler assemblies. A common fault with Amal tickler assemblies on Type 276/289 or competition Float chambers (i.e the floatchambers used on TT, RN, GP carbs) is that the original tickler spring either rusts and corrodes, or just compresses after many years of use. This spring is manufactured to the original dimensions and restores your tickler to its original non-drooping position!. Price is each |
Lock Screw to fit Floatchamber Top Cover on Amal Type 276/TT/RN Carb (Stainless Steel)Product no.: 0163 14/021This lock screw is an exact copy of the type fitted to most types of Amal floatchamber screw covers - i.e those floatchambers fitted to Type 276, TT, RN or Dirt Track Carburettors - in fact almost all Amal float chambers that have a screw in top. |
Body Base Plug Screw - To Fit Type 276 and (and Early TT?) Float Chamber (Stainless Steel)Product no.: 0847 13/153This is the base plug as fitted to the bottom of floatchambers on standard roadgoing Amal 276/289 type carburettors - it may also have been fitted to other Amal model types using seperate floatchambers - see detail listing for more background. CNC manufactured in stainless steel. Comes with correct imperial red fibre washer |
Gasket Set to Fit Original Amal 276 Type (flange fitting) CarburettorsProduct no.: 0948 276GsktGasket set to fit original (flange fitting) Amal 276 carburettors. Set consists of 6 nice quality washers. This set can also be fitted to clip fitting versions of the 276 carb - but obviously the large flange washer would not be used |
Gasket Set to Fit Original Amal 289 Type (flange fitting) CarburettorsProduct no.: 0949 289Gskt2Gasket set to fit original (flange fitting) Amal 289 carburettors. Set consists of 6 nice quality washers. This set can also be fitted to clip fitting versions of the 289 carb - but obviously the large flange washer would not be used |
Gasket Set to Fit Original Amal 376 Monobloc Type CarburettorsProduct no.: 0950 376Gskt3Gasket set to fit original Amal 376 Mononloc carburettors. Set consists of 6 nice quality washers. |
Gasket Set to Fit Original Amal 389 Monobloc Type CarburettorsProduct no.: 0951 389Gskt4Gasket set to fit original Amal 389 Mononloc carburettors. Set consists of 6 nice quality washers. |
1 - 30 of 63 results |
|