3b. Electrical Lighting, Electrical System and Other Electrical Related Parts

3b. Electrical Lighting, Electrical System and Other Electrical Related Parts

 

This section includes many electrical items of the type fitted to Norton roadgoing models from the 1930's to the 1950's.  This includes a variety of headlamp units, tail lights, electrical wiring harneses and other electrical fittings and related parts for your restoration


Display per page
Sort by
1 - 30 of 45 results

Wiring Harness for Rigid/Plunger Singles (SOHC/OHV/SV): Genuine Lucas : Horn at Front Fitting

Product no.: 0710 Wiring_H1

This listing is for a complete wiring harness to fit most rigid and plunger framed Norton singles, manufactured by Lucas.  This variant is the more common type, where the horn was fitted to the front engine plates.  The harness is a very good reproduction of the type fitted 1930's - 1950's, including employing a cloth main harness with rubber sheath

£68.00 *
In stock

Wiring Harness for Rigid/Plunger Singles (SOHC/OHV/SV) Genuine Lucas : Horn by Saddle Fitting

Product no.: 0711 Wiring_H2

This listing is for a complete wiring harness to fit most rigid and plunger framed Norton singles, manufactured by Lucas.  This variant is the less  common type, where the horn was fitted near the saddle mount.  The harness is a very good reproduction of the type fitted 1930's - 1950's, including employing a cloth main harness with rubber sheath

£65.00 *
In stock

Wiring Harness for Featherbed Singles - Alternator/6v Type (OHV/SV - and SOHC?) : Genuine Lucas

Product no.: 0944 Wiring_H3

This listing is for a complete wiring harness to fit Featherbed framed Norton singles - those fitted with alternator and 6v electrical systems, manufactured by Lucas.  See listing for further detail

£90.00 *
In stock

New Lucas Type U39 (Norton 1930's-50's) Headlamp Switch and Ammeter Panel (Each)

Product no.: 1087 Lucas26

This is a replica of the Lucas U39 headlamp binacle fitted to Norton Singles (as well as many other makes) from the late 1930's through to the mid 1950s.  The binnacle is fitted with a 6v black face ammeter as well as the 3 setting bakelite replica U39 light switch.  Price is per unit.  See detail listing for more information

 

£42.00 *
In stock

New Lucas Type 6v Ammeter (Similar to Norton 36084 1940's-50's) - Black Face (Each)

Product no.: 1091 Lucas29

This is a nice quality replica of the Lucas 6v Black Faced ammeter of the style most commonly fitted to Norton (Binnacle Headlight) type road going models from the mid 1930's through to the 1950's. Price is Each

£20.00 *
In stock

New Lucas Type DU142 8 Inch Headlamp Unit + Switch/Ammeter Panel (Norton 1930's-40's) - Black (Complete)

Product no.: 1089 Lucas28

This replica of the Lucas type 8" DU142 headlamp with inbuilt binnacle containing black faced 6v Ammeter and U39 type headlamp switch were normal fittment on girder fork Norton models from mid 1930's (aprrox) through to 1947, when the telescopic fork models were introduced.  This is a nice example of this complete unit and represents excellent value for money.  Note: Our versions are supplied with additional headlamp mount bolts and washers in stainless steel with Norton type 'curved heaad profile', to replace the standard modern plated bolts normally fitted.  See listing for more detail

£110.00 *
In stock

New Lucas Type MU42 6.5 Inch Headlamp Unit+Switch/Ammeter Panel (Norton 1940's-50's) - Black (Complete)

Product no.: 1088 Lucas27

This replica of the Lucas type 6.5" MU42 and SSU700 headlamp with inbuilt binnacle containing black faced 6v Ammeter and U39 type headlamp switch were standard fittment on Norton models from 1947 through to the mid 1950's (not Featherbed).  This is a nice example of this complete unit and represents excellent value for money.  Note: Our versions are supplied with additional headlamp mount bolts and washers in stainless steel with Norton type 'curved heaad profile', to replace the standard modern plated bolts normally fitted.  See listing for more detail

£96.00 *
In stock

New 5/16 x 1" Stainless Bolt with Dome Head + Washer - To fit Repro Lucas Headlamp Unit (Pair of each)

Product no.: 1094 5_16_UNFDome

These are 5/16" x 1" long thread length, UNF Stainless Steel bolts - but with a CNC machined Norton 'rounded' profile head.  We offer these with our replica Lucas headlight units - which like so many proprietary manufactured units, use steel plated UNF bolts with modern writing on them.  But we also offer these bolts seperately for those that have also purchased similar items with UNF bolts - and want to replace them with something more period!.  Price is for 2 bolts and 2 wide faced washers, all in stainless steel.

£5.50 *
In stock

Lucas MT110 Rear Light Unit with Stoplamp

Product no.: 0403 MT110

This replica Lucas MT110 light unit was standard fitment on the Norton International through the 1930's/ It is fitted with a twin filament Rear Light/Stop Light bulb as well - which on modern roads I think is essential. Although made by a proprietary supplier (and probably made in China), I have to say I was really impressed by the quality of this unit, it looks very nice. 

£24.00 *
In stock

Lucas 477 Rear Light Unit with Stoplamp

Product no.: 0404 477/1

This replica Lucas 477/1 light unit was a later version and I believe was fitted to Norton road bikes in late 1930's - 1940's, taking over from the MT110 which we also sell (Item0403).  It is dual filament with stop light facility, which on modern roads I think is essential. 

£25.70 *
In stock

Miller 'Stop' Rear Light Unit

Product no.: 0441b VStop

Lovely reproduction of the distinctive Miller 'STOP' rear light unit, as fitted to Vincent road bikes as well as a few others of the immediate Post-War period. So nice you might want to consider fitting it to your Norton! (I have one fitted to my Vincent Comet)

£22.10 *
In stock

1930's - 50's Style Red Rear Reflector (Each)

Product no.: 0342 Reflec1

Period reprduction Red Reflector, in nice mount. Typical of the type fitted to the bottom of mudguards or rear number plate

£9.80 *
In stock

New Lucas Type 6v Voltage Regulator (Similar to Norton 33108/36084 Mid 1930's-50's) - (Per Unit)

Product no.: 1092 Lucas030

This replica of the 33108/36084  type 6v Voltage Regulator is a nice example of the type originally fitted to most roadgoing Norton single cylinder models, fitted from mid 1930's to the late 1950's.  See detail listing for more information. Price is per unit.

£41.00 *
In stock

Solid State Voltage Regulator (V-Reg-2a) - Modern Replacement for Original Lucas/Miller Type

Product no.: 0574 33018_SS

This product listing is for an excellent quality modern 'Solid State' dynamo regulator which can be used to replace original 'insides' of the notoriously unreliable Lucas 33018a type mechanical regulator, fitted to most Norton single roadgoing models both pre and post war.  

£77.70 *
In stock
can be shipped within 10 days

(Lucas) Voltage Regulator Clip - Under Saddle Norton International Fitting Type (Each)

Product no.: 0217 A11/843

- This is the fabricated bracket that was used on Postwar Pre-Featherbed framed SOHC International models to mount the Lucas Voltage Regulator, under the saddle.  The mounting bolt affixes to the frame rear mudguard/top oil tank bracket mount (see detail listing).  This item is fabricated by us, using an original Norton mount bracket as the pattern.  As shown in the 1948 Norton Spare Parts catalog - Part Number A11/843. 

£18.90 *
In stock

Genuine Lucas B38-6 (Large Rubber Style) Battery Box - PU7D

Product no.: 0577 B386

This is a genuine Lucas - empty battery box of the large rubber (B38-6) type - which is the type of 6v battery originally fitted to a number of british bikes of the 40's/50's/60's - including both Norton and Vincent singles.  It was also not unusual to fit this type of battery to Norton singles of the 1930's, as a replacement for earlier T-Shape batteries which were discontinued after WWII.

This empty battery box is a modern (hard rubber) replica of the original Lucas type (but still manfactured by Lucas), but does not have any battery inside it - instead it is ready to take a modern 'gell cell' battery.  In the 3rd and 4th photograph I show one of those modern dry cell batteries (not included) - which will fit snugly in the case.  Note:  I may shortly be offering thes dry cell battery for sale as well, email for details when placing order if you would like to order one

£37.00 *
In stock
can be shipped within 10 days

Norton OHV/Side Valve - Rigid/Plunger Frame 'Rectangular' Type Battery Carrier

Product no.: 1027 E2/586

- This is a reasonable copy of the battery carrier that was fitted to OHV and Side-Valve rigid and plunger framed models, that fitted the Exide, rectangular style upright 6v battery.  Slightly improved by us from other similar items you may see advertised - see listing for more detail.  Price is each

£53.00 *
Not in stock

Rubber Base Mat For Lucas Battery

Product no.: 0435 LUC009
Rubber base pad to fit under the Lucas 'hard rubber' style batteries. Ever since the first time I worked on a bike my father always taught me to fit a piece of rubber under the battery to help prevent it cracking - well this pad was made just for that purpose! This pad is 5 3/4" x 3 1/2" dimensions - which is actually meant for the mid 1950's-1960's Lucas type batteries, but can also be used on the earlier narrower type Lucas batteries often fitted to Norton's on rigid and plunger framed versions, simply by trimming an inch or so off one side. (Note: if you have a 'T' shaped battery and battery carrier you do not need to fit this type of mat)
£4.10 *
In stock

Reproduction Lucas Dynamo Bakelite Cover (1937 - @1953 models)

Product no.: 0616 LUC014

Reproduction of the black bakelite cover fitted to Lucas Magdyno Dynalmo's of the CVC/2 brush type that were typically fitted to all Norton roadgoing models from approximately 1937 - to the early 1950's.

£13.10 *
Not in stock

Lucas Mag/Dyno Dynamo - Rubber Wiring Input Shroud (Each)

Product no.: 0428 LUC008

This is the distinctive rubber shroud that fits over the input wires on the pre-war and immediate post-war Lucas Dynamo - where those dynamos were fitted with a flat bakelite cover - see photos for details.  Price is Each

£4.80 *
In stock

Slotted Screw Securing Lucas Dynamo To Magneto (Magdyno) - Stainless Steel

Product no.: 0454 200569

As the description implies, this is the special slotted nut/screw that was used to secure the Lucas dynamo to the magneto (Lucas Mag/Dyno's) fitted to all Norton road-going models from 1930's to 1950's. This screw is very nicely made and identical to original, but in stainless Steel

£6.50 *
In stock

End Cover Clip to fit Lucas Mag/Dyno (Each)

Product no.: 1026 Lucas32

This is a nice quality reproduction of the spring type clip, used to retain the chromed pressed steel points cover on Lucas Magdyno units, as used on most Norton roadgoing singles from the 1930's through to the late 1950's.  See detail listing for dimensions.  Price is Each

£9.50 *
In stock

Cheesehead Screw Set to fit Lucas Mag/Dyno Front Cover - Pack of 4

Product no.: 1025 Lucas31

These are the fine thread screws that fit the Lucas Magdyno triangular front cover in place, as used on most Norton roadgoing singles from the 1930's through to the late 1950's.  Nice shallow curve to the front of the screws, as per the originals. Price is for pack of 4

£6.80 *
In stock

Magneto Platform Screws for OHV/SV Models - Lucas Mag/Dyno Type - Pack of 4

Product no.: 0712 E3831

These are the coarse thread countersunk screws that are used to secure the Lucas Mag/Dyno to the cast aluminium platform used on OHV and SV Norton singles.  Price is for pack of 4

£10.00 *
In stock

Altette 6v HF1234 Horn by - Genuine Lucas

Product no.: 0471 HF1234

High quality version of the famous Altette Model HF1234 6 volt horn - manufactured by Lucas (the original company that made electrical components for Norton, as fitted to all Norton roadgoing singles from the 1930's through to the 1950's. 

£147.00 *
In stock

Altette Horn Mounting Bracket

Product no.: 0472 HF1234MB

Mounting bracket for mounting Lucas Altette horn on the chassis. Nice quality item with correct diamond shape reinforcing plate at mount point.  Black enamelled, price is Each

 

£13.00 *
In stock

Lucas 31482A Dip Switch (Diamond type)

Product no.: 0473 31482A

Good quality reproduction of the Lucas 31482A type dip switch, as was original fitment on all Norton singles (including SOHC International) from mid 1930's to late 1940's, with correct diamond shape switch (not round)

£26.30 *
In stock

Lucas LU6204 7/8" Horn Button

Product no.: 0474 LU76204
Good quality reproduction of the Lucas LU6204 type chromed horn button, to fit 7/8" diameter handlebars, as was original fitment on Norton singles (including SOHC International) from 1930's - 1950's.
£11.60 *
In stock

Lucas LU6204 1" Horn Button

Product no.: 0475 LU76204A
Good quality reproduction of the Lucas LU6204A type chromed horn button. The same as item 0473 except this one is to fit earlier 1" diameter handlebars, as was original fitment on Norton singles (including SOHC International) in the mid 1930's
£11.60 *
In stock

Lucas 5033234 Brake Light Switch

Product no.: 0477 5033234
Good quality reproduction of the Lucas Type 5033234 Brake Light switch, as was original fitment on Norton singles (including SOHC International) late 1940's to mid 1950's, I can remember removing an original one of these from my first 1950's ES2.
£15.00 *
In stock
*
Recommended Retail Price, plus delivery
1 - 30 of 45 results