1.q Norton 1920's and Earlier 1930's Models - All Parts/All Models

This Flat Bottomed Rocker Adjuster and Tapered Locknut are a slightly longer version of the 9163 (Std length) adjuster fitted to early SOHC engines and most OHV models up to 1937.  We modellecd this 5mm longer version on an original adjuster - that may have been modified, as at least one customer has requested a longer type.  See Listing for more information. Price is for a single adjuster and locknut (i.e. 2 parts)

These are the distinctive 9/32" x 26tpi BSC tapered locknuts as fitted to the Norton OHV/Walter Moore CS1 Flat Pad type rocker adjusters (our items 1121 and 1122 from approximately 1929-37.  These have been CNC manufactured in stainless steel to exactly the same dimensions as a Norton 1930's example.  Note we also sell the locknut with the actual adjuster - see Item 1121 and 1122, but as the original nuts are often chewed or come loose and fall off - we sell them on their own here.  Price is each (i.e. one locknut)

This item listing is for a complete Norton OHV non-adjustable pushrod, of the type that was most commonly fitted to Norton OHV models between approximately 1930 and 1937.  The individual parts faithfully replicate those of the original Norton design.  Similar pushrods were also fitted circa pre-1930, but with different bottom pieces.  See listing for more detail on lengths and type availability.  Price is each 

This item is for a complete (single) adjustable pushrod assembly to fit the 1938-47 design of OHV Engines.  This design employed the earlier long steel pushrod tube design - but unlike the earlier design, the top piece had a screw on adjustable top cup and locknut. We keep the most common 500cc length in stock, but can also supply these to order - to your length. See listing detail to pre-order. Price is per pushrod (2 required per engine).

This item is for a spare locknut to fit 1938-37 OHV Pushrods.  These are CNC machined fron stainless steel to the same dimensions as original Norton pushrod locknuts, an original nut being used as the pattern, however we manufacture these in stainless steel.  We also sell the complete pushrod assembly - see Item 1125, but as stripped locknuts was a common issue with this pushrod design, we also sell the locknut seperately.  Price is each

This is a replacement Rocker Ball pin, to fit the front (pushrod side) rocker on 1938-1947 type OHV engines.  The profile is copied from an original pattern and the ball and shaft are hardened.  See listing for more model and fitment information.  Price is Each

This item 'Pre-Listing' is to let Pre-war OHV owners know - we will shortly be manufacturing batch's of the distinctive and long Norton OHV Pushrod tubes - in seamless stainless steel, and the special bottom Hex Gland Nuts that were fitted to each respective type.  See Detail Listing on how to find more information and pre-order

These Cylinder Head studs are of the type fitted to pre-war OHV Valve engines in the late 1920's and early 1930's, where the design of OHV engine had seperate head studs (i.e. before the introduction of long 'through' studs. See listing for more information.  Price is per stud

This distinctively styled Cylinder Base Nut was of the design fitted to OHV singles, before the OHV design switched to 'Through Type' long cylinder studs in approximately 1935. They were also used on Side Valve engines - both types employing a coarse Whitworth cylinder stud thread. See listing for more information.  Price is per stud

- Highest quality inlet or exhaust valve manufactured by G & S Valves - to fit all Norton OHV Model 18 and ES2 engines.  Also commonly fitted to Walter Moore CS1 and early OHV models.  See listing for more detail.  Price is per valve