This listing is for the cable plunger commonly fitted to manual advance/retard Lucas magnetos - and is described as Original Part Number 454969.  This should fit M01 MagDyno magnetos commonly fitted to Norton single road models, as well as many twin cylinder magnetos.  Price is Each

As can be seen from the accompanyning photo - the overall lengtth of this plunger is approximately 35mm

This listing is for a genuine Lucas (from their Classic Range) - Magneto Model/Serial Number Aluminium Label.  This type is black and of the type used on most Lucas roadgoing models - and has an Anti-Clockwise Arrow direction indicator.  Note:  model type not stamped on this label. 

This magneto label is a genuine Lucas lable from their Classic range - so you can expect the format and writing to be as per original.  Note that the Lucas label says this is for a K2F magneto - but actually, the magneto model type is not actually stamped/etched on it - it is blank . . . which means that it can be used for Lucas MagDyno M01 magnetos as well as any other roadgoing type of magneto that originally used a Lucas black serial plate.  It would not be difficult to either punch (with a small punch set) or etch the magneto model type in the blank area where that would normally have been placed. An original Lucas M01L (MagDyno) label is also shown for reference. 

Label Punching: If required, wee can offer a punching service (see last photo) using very small punches. But please bear in mind it is a fiddly and each letter/number has to be placed manually - so it may not look as perfect as a machine stencil (original letters often did not look that neat either!).  As this is a time consuming task - expect it to cost between £8.00 and £12.00, depending on what information is required, as well as the price of the label.  Add a note on the Online Order if requiring this service - or email for more detail.

Price is Each (and label will be supplied unstamped unless otherwise requested)

Please note - these labels are nice quality and have only recently been introduced (i.e. this listing updated Aug 2023).  You may notice these labels (Item 1194, 1195 and 1196) are much cheaper than the other magneto labels we offer.  Well that is because the other labels are manufactured for us by a specialist label supplier in Europe and are on a thicker material (some in etched brass) .  . . and because those are only made in small numbers, and bought in from Europe - those other labesls are far more expensive    Unfortunately The Lucas classic range only look to do these 3 types of label . . . and of course will not be offering any BTH type!!

This listing is for a genuine Lucas (from their Classic Range) - Magneto Model/Serial Number Aluminium Label.  This type is black and of the type used on most Lucas roadgoing models - and has a Clockwise Arrow direction indicator.  Note:  model type not stamped on this label. 

This magneto label is a genuine Lucas lable from their Classic range - so you can expect the format and writing to be as per original.  Note that the Lucas label says this is for a K2F magneto - but actually, the magneto model type is not actually stamped/etched on it - it is blank . . . which means that it can be used for Lucas MagDyno M01 magnetos as well as any other roadgoing type of magneto that originally used a Lucas black serial plate.  It would not be difficult to either punch (with a small punch set) or etch the magneto model type in the blank area where that would normally have been placed.  An original Lucas M01L (MagDyno) label is also shown for reference. 

Label Punching: If required, wee can offer a punching service (see last photo) using very small punches. But please bear in mind it is fiddly and each letter/number has to be placed manually - so it may not look as perfect as a machine stencil (original letters often did not look that neat either!).  As this is a time consuming task - expect it to cost between £8.00 and £12.00, depending on what information is required, as well as the price of the label.  Add a note on the Online Order if requiring this service - or email for more detail.

Price is Each (and label will be supplied unstamped unless otherwise requested)

Clockwise Rotation on Norton Singles - Background:

\As an FYI for Norton single cylinder owners - most will know that the majority of Norton single cylinder models were fitted with anti-clockwise magnetos (i.e. our Item 1194 if you are intending to fit a label to an anti-clockwise M01 Lucas MagDyno unit).  However - the OHV/SV 1938/47 model range had the inlet camshaft driven by the exhaust cam (not the crankshaft as per the 1948 onwards design) - therefore they were fitted wtih Clockwise magnetos - and would require this label.  You may also find this information useful if looking for a magneto for a Norton 38-47 model - unfortunately, clockwise direction magnetos - even M01 type are more difficult to find . . . but at least you can get the label here!

Please note - these labels are nice quality and have only recently been introduced (i.e. this listing updated Aug 2023).  You may notice these labels (Item 1194, 1195 and 1196) are much cheaper than the other magneto labels we offer.  Well that is because the other labels are manufactured for us by a specialist label supplier in Europe and are on a thicker material (some in etched brass) .  . . and because those are only made in small numbers, and bought in from Europe - those other labesls are far more expensive    Unfortunately The Lucas classic range only look to do these 3 types of label . . . and of course will not be offering any BTH type!!

This listing is for a genuine Lucas (from their Classic Range) - Magneto Model/Serial Number Aluminium Label.  This type is red and is stamped in the model type 'K2FC' - which was the competition type fitted to many sports and racing parallel twins.  See listing for more detail.  Price is Each

This magneto label is a genuine Lucas lable from their Classic range - so you can expect the format and writing to be as per original.  Unlike the other two black magneto labels that Lucas produce (which have the model type unstamped) - these labels are already stamped with the model type 'K2FC'.

Price is Each

Please note - these labels are nice quality and have only recently been introduced (i.e. this listing updated Aug 2023).  You may notice these labels (Item 1194, 1195 and 1196) are much cheaper than the other magneto labels we offer.  Well that is because the other labels are manufactured for us by a specialist label supplier in Europe and are on a thicker material (some in etched brass) .  . . and because those are only made in small numbers, and bought in from Europe - those other labesls are far more expensive    Unfortunately The Lucas classic range only look to do these 3 types of label . . . and of course will not be offering any BTH type!!

High quality genuine Lucas version of the famous Altette Model HF1234 6 volt horn - manufactured by Lucas (the original company that made electrical components for Norton, as fitted to all Norton roadgoing singles from the 1930's through to the 1950's.

Cast iron body, and when I plugged one up to a battery made a good sound, just like the original. I will shortly be fitting one of these to one of my own bikes.

Not cheap - but as you can see from looking at the way it looks and is packaged - a real quality item.

Note: this horn is 6 volt, as per original Norton, however, we can also obtain a 12 volt version by special order - email at sales@racingvincent.co.uk to enquire

(Photos update May 2023 - to show the new Red Lucas Classic Range packaging - which is a very smart red now, based on the colour of the oritginal packaging in the 1950's-60's.  These really do look excellent quality.  I have kept the previous photo of the green packaging, as some Lucas items do occasioinally still get delivered in that colour as well.)

Mounting bracket for mounting Lucas Altette horn on the chassis. Nice quality item with correct diamond shape reinforcing plate at mount point. 

Comes black enamelled, and ready to fit.

price is Each

I particularly like this item as it has the correct diamond shaped reinforcing plate around the mounting hole, unlike some cheaper copies I have seen, and is identical to the original item.

This is the correct mounting bracket for the Lucas Altette type horn - which we also supply - Item 0471.

Good quality reproduction of the Lucas 31482A type dip switch, as was original fitment on all Norton singles (including SOHC International) from mid 1930's to late 1940's, with correct diamond shape switch (not round)