Your basket is empty.
Categories Items - Full Catalog 1.d Norton SOHC Cambox
1.d Norton SOHC Cambox
SOHC Model 30/40 Cam Securing RollerProduct no.: 0054 A11/796
- Silversteel roller that secures the two cams together. Quite a difficult piece to make, as it has a tight length tolerence - to avoid the issue of the cams not fully mating together (too long), or there not been enough protruding from both cams (too short).
£3.50
*
|
SOHC Model 30/40 CamshaftProduct no.: 0055 A11/790- SOHC Camshaft to fit all standard Model 30/40/International and CS1/CJ camshafts - This camshaft is for the standard (side oil feed) cambox type bikes |
SOHC Model 30M/40M SOHC Manx CamshaftProduct no.: 0056 A11M/790- SOHC Camshaft to fit all central oil feed racing camshaft engines - This camshaft has provision for a central oil feed, as used on racing and competitionengines. Can also be used on standard side feed engines if required |
SOHC Camshaft Spacer RingProduct no.: 0352 A11/798
This is the distinctive slotted spacer ring that fits over the camshaft in the tunnel area between the front (bevel gear) chamber and the rear (cam) chamber. On racing cambox's that employ the centrally fed camshaft oilway, this is no more than a spacer ring, however, for the road going type cambox, which uses a solid camshaft, this spacer ring is very important as oil is fed to the cam chamber along the slot. For this reason, there is a slight lip one one end, to ensure the bush can only be fitted in one direction
£16.00
*
|
Camshaft Bevel Shim - Set of 3 ShimsProduct no.: 0328b A11/774-s- Essential when rebuilding your engine to ensure that the upper vertical bevel gear has the correct backlash and position in relation to the camshaft bevel gear, these camshaft bevel shims fit between the camshaft and the front cambox bearing. This is for a set of 3 shims in the following sizes : 0.2mm/0.3mm/0.5mm See listing for more detail on thicknesses. Set of 3 |
Camshaft Bevel Shim - Various Sizes (Each)Product no.: 0328 A11/774- Essential when rebuilding your engine to ensure that the upper vertical bevel gear has the correct backlash and position in relation to the camshaft bevel gear, these camshaft bevel shims fit between the camshaft and the front cambox bearing . Available in the following 5 sizes : 0.5mm/0.3mm/ 0.2mm/0.1mm/0.05mm. See listing for more detail on thicknesses.
|
SOHC Camshaft Back Bearing Distance PieceProduct no.: 0329 A11/788- This is the distance piece that betweens the cams and the cambox back bearing. Pattern taken from original SOHC pre-war Cambox. |
Cambox Main (Front) Bearing - SOHC Camshaft Front Ball Bearing: RHP or SKF Brand: EachProduct no.: 0026 A11/785- Single row ball bearing.fitted to the main SOHC cambox shell (i.e. front cambox bearing) on a SOHC cambox's from 1931-56, both International (alloy) and SOHC Manx/M40 and some Featherbed (magnesium) cambox shells. This bearing is from a top quality bearing manufacturer and will be either RHP or SKF dependent on current availablity. Price is each |
Cambox Bearing - SOHC (Inter Mod 3040 and CS1CJ) Camshaft Back Roller Bearing : RHP C3Product no.: 0027 A11/786- Single row caged roller bearing. Fitted to Model 30/40 (International) SOHC engines. These are either RHP or Hoffman (Hoffman became RHP) - both best quality and in correct and very difficult to find C3 fit.
|
Cambox Bearing - SOHC (Mod 30M/40M & SOHC Manx) Camshaft Back Roller Bearing : RHP C3Product no.: 0028 A11/786MCambox Bearing - Camshaft Back Roller Bearing : as fitted to the Model 30M/40M (Manx) cambox backplate - identifiable from the standard International type, in that the Manx backplate is in magnesium. These are correct RHP versions in correct C3 fit - now very rare |
| 11 - 20 of 88 results |
|
