Selection of Stop/Go Bore Gauges: Imperial/Metric - Various Sizes Please Enquire

We still have hundreds of bore gauges in all sizes and types still to sort and list.  If you have a particular gauge you are looking for then please contact us and we check if we have it available.

Drop us an email on sales@racingvincent.co.uk and tell us which size you need - or just place this item as a seperate order and state the size in the Notes section when placing the order - we will then have your details from the order and Paul will contact you when he searched for the gauge you request

Selection of Stop/Go Bore Gauages: Metric 1.27mm to 6.385mm

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bore of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red).

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading.

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used). We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Please contact us to purchase items marked with an asterisk*

Selection of Stop/Go Bore Gauges: Metric 6.488mm to 11.018mm

<Note - when ordering from this list - state which gauge you require and we will adjust final price accordingly - price below is for one (single) gauge>

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Metric 12.913mm to 19.021mm

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Metric 8.000mm to 30.033mm

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Metric 32.000mm to 60.030mm

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Imperial 0.1230" to 0.3130"

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Imperial (inch) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Imperial 0.2818" to 0.3755"

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Imperial (inch) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Metric 1.98mm to 6.912mm

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.

Selection of Stop/Go Bore Gauges: Metric 6.975mm to 12.027mm

A selection of pre-used precision Stop/Go gauges for use in the home workshop for engineering and manufacturing use. These gauges are very useful for measuring the bores of holes when making parts in the workshop, they have two sizes - one representing the acceptable bore size (Go, shown in green) and out of tolerance (Stop, shown in red). 

These particular gauges all came from an aeronautical engineering companies measuring shop in the North of England, when the company ceased trading 

We have Bore/Thread gauges for both Imperial and Metric sizes - this listing is for Metric (mm) sizes.

-These are mostly used gauges (although we can see that some of them look like they have never been used), We have graded these gauges according to our best visual interpretation of their conditions, categorized as follows:

1-Unused/New in appearance
2-Good, used
3-Good, well used
4-Fair to poor, still usable but signs of much use

Each of the gauges listed in this section have detailed information regarding them and an image showing the gauge.