1.j Norton Gaskets/Seals for SOHC, OHV, SV Models

This is the E4251 3/8" x 26tpi above magneto/rear engine bolt set as fitted to early Norton Model 40M/Pre 48 Manx Model 40M competition models - as fitted above the magneto, with the competition type distinctive Norton type 'Wasted Head'/reduced hex curved head profile.  The set consists of hex head bolt, deep nut and two washers - CNC manufactured by ourselves in Stainless Steel. 

This is the E4251(Norton part number) 3/8" x 26 Engine Bolt set - front lower crankcase - approx 4pm position as fitted to SOHC Norton International Model 30 and Model 40 models. This has the rounded head profile as would be expected on roadgoing International models.  The set is CNC machined from stainless steel with the correct 'reduced Hex' head and profile, 2 stainless washers and reduced Hex wider nut

This is a 1/4 BSC shouldered bolt of 1.00" shaft length, with the distinctive shouldered square head, of the type used on brake assemblies of early Douglas 2 3/4hp models.  It is intended to feed through the brake rod square clevis - and then screw into the original Douglas brake pedal, then a locknut is used on the opposite side to retain it.  Consists of bolt, nut and two 1/4" washers, all in Stainless Steel

This is a shouldered bolt of 1.00" shaft length, with the distinctive shouldered square head, of the type used on brake assemblies of early Douglas 2 3/4hp models.  It is intended to feed through the brake rod square clevis - and then screw into the original Douglas brake pedal, then a locknut is used on the opposite side to retain it. This item is an alternative to item 0687 - in that it has a Douglas 25tpi thread instead of 26tpi BSC thread used on item 687.  Please measure your original brake pedal thread/bolt to ensure you know the correct thread before ordering.  It is CNC manufactured in stainless steel

This is a shouldered bolt of 0.710" shaft length, with the distinctive shouldered square head, of the type used on brake assemblies of early Douglas 2 3/4hp models.  It is intended to feed through the circular locking ring used on early Douglas 2 3/4hp brake pedal assemblies, which is used to adjust the position of the brake pedal on its shaft. This bolt has a  Douglas 0.257" x 25tpi thread, as per the original bolt used as a pattern.  Please measure your original brake pedal lock ring thread/bolt to ensure you know the correct thread before ordering.  It is CNC manufactured in stainless steel

This is a shouldered bolt of 0.710" shaft length, with the distinctive shouldered square head, of the type used on brake assemblies of early Douglas 2 3/4hp models.  It is intended to feed through the circular locking ring used on early Douglas 2 3/4hp brake pedal assemblies, which is used to adjust the position of the brake pedal on its shaft. This bolt is an alternative to Item 0689 - it having a  a 0.257" x 26tpi BSC thread.  Please measure your original brake pedal lock ring thread/bolt to ensure you know the correct thread before ordering.  It is CNC manufactured in stainless steel

This is a complete brake rod assembly to fit an early Douglas 2 3/4hp model of early  type.  It consists of Douglas modelled square brake clevis/brake rod, two locknuts, square headed brake pedal/clevis bolt, washer locknut - CNC manufactured in stainless steel from an original Douglas pattern

This listing is for a CNC manufactured clevis, square headed clevis bolt, washer and locknut to fit an Douglas 2 3/4hp model of early  type.  All are manufactured in stainless steel from an original Douglas pattern

This is a CNC manufactured clevis in stainless steel to fit the 2 speed gearbox fitted to Douglas 2 3/4hp models.  It is copied from an orgiinal Douglas clevis.  (may also fit other gearboxs for Douglas's of this era.

This is a faithful reproduction of the gearlever knob fitted to early 2 - speed Douglas motorcycles - the 2 3/4hp and 4hp models.  It is CNC manufactured from exotic wood - either Wenge (dark) or Yew (light) to a high finish, lacquered and comes complete with CNC manufactured gearlever bolt in Stainless steel.  Price is for the pair