Pretty Button type kill switch - with Red centre button, ideal for using as a magneto kill switch, or also as a horn switch if required.  Fits 7/8" handlebars. 

Price is Each

This button type switch is typical of horn or magneto kill switches fitted to British motorcycles from the 1930's through to the 1960's - but not normally seen with a red central button - which makes it quite striking and ideal for a magneto kill switch.

For anyone that has not fitted this type of 'kill switch' before (particularly with a magneto) - they only require one 'Live' wire to be fitted (for a magneto kill switch - this is normally fitted to the magneto end cover and presses on the inside of the cap against the central points plate bolt), which has a screw fixing.  The body of the horn itself is the second contact - this being earthed to the handlebars.

I fitted one of these buttons to my own Vincent Comet - see photo, which looks quite pretty.

This is a genuine Lucas Type 22B/31383 rear Brake Light Switch, from their Classic range.  Brake light switch's of this type and shape were fitted to Norton single models Including OHV and SOHC International models) of the 1950's, possibly into the early 1960's  

I can remember removing having an original Lucas brake switch of this type fitted to a 1955 OHV ES2 model we had back in the 1970's - although that was an original old and tatty one, unlike these .. . it was held together with Araldite!. 

These are nice quality as you would expect from Lucas.  Price is Each

Good quality reproduction of the Lucas Type U39 31340 Headlamp switch, as was original fitment on all Norton singles (including SOHC International) from mid 1930's to mid 1950's, Switch has 3 positions - 'OFF', 'L', 'H'. Note, some later Norton's were fitted with the same switch with a longer switch handle, we can also supply these by special order.

This is the rubber shield that fits around the wires on the back of the Lucas (or Miller) headlidght switch in the headlamp shell, to ensure the exposed connectors are protected and insulated.

This is the pressed steel clip and screw that is used on Lucas headlight rims, to secure the rim to the headlamp shell. Sorry, but the screw has got a Posi-drive '+' style head, not a slotted head, which would be more correct for 30's/40's style headlamps.

Pack of 5 headlamp shell retaining clips, retains headlamp reflector shell to the headlamp rim. For Lucas headlamps, but am sure would fit Miller as well

Reproduction 3.5" rubber cable tie, of the 'wobbly' type. suitable for securing wiring and cables on the smaller frame tubes.

As universally fitted to most British motorcycles - a period fitting when restoring your bike, I tend to use them for keeping controls cables together when routing them around the motorcycle.  They can also be used for securing wiring to the smaller frame tubes - particulcarly rear light wiring

Sold as a pack of 5.

(Note: this particular type does sometimes have slight rubber flashing, easily cut away with a pair of nail scissors)

Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'A' (also inscribed on cable tie) which are 3 3/4" long . suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 4.

For the larger Norton frame tubes, it is easiest to 'mix and match' these cable ties with the other sizes to make 'tandem' cable ties (i.e. two cable ties joined together), dependent on how many cables or wires you are trying to secure

Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'A' (also inscribed on cable tie) which are 3 3/4" long . suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 4.

This type is in an attractive Grey colour - which was a period colour for these ties and makes a nice change from Black - it shows the John Bull writing and serial number very clearly

For the larger Norton frame tubes, it is easiest to 'mix and match' these cable ties with the other sizes to make 'tandem' cable ties (i.e. two cable ties joined together), dependent on how many cables or wires you are trying to secure

Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'B' (also inscribed on cable tie) which are 4 1/2" long . suitable for securing wiring and cables on the smaller and medium frame tubes. Sold as a pack of 4.

For the larger Norton frame tubes, it is easiest to 'mix and match' these cable ties with the other sizes to make 'tandem' cable ties (i.e. two cable ties joined together), dependent on how many cables or wires you are trying to secure