This section lists items specific to the RN (Remote Needle) carb, fitted to racing Norton's and many other pure competition bikes from 30's-early '50's - but many of the RN specific parts are now extremely hard to find. Also check the section for parts to fit Amal TT carbs - as many paarts were shared by both types and are listed in our TT carb section
10TT/RN BellMouth - Short Length With Cone Air Filter : To fit Amal 10TT/RN CarburettorsProduct no.: 0970 TT/BellSF- This is a replacement for Amal TT or RN bellmouth if you want to use the bike on the road and are concerned about ingestion of dirt or grit. It has a 'standard' short type TT/RN inlet tract and thread with a modern 'Pit Bike' cone type filter fitted. Two bore sizes available. See detail listing for more information |
New 10TT BellMouth LockringProduct no.: 0142 TT/119- Lock ring to fit original Amal TT, RN and some GP carburettor bellmouths. CNC machined. Back in Stock - Dec 2023 |
Air Adjuster Kit to fit original Amal TT, RN and GP Carbs - 6 PartsProduct no.: 0149 TT/Air6 part air adjuster kit to fit original Amal TT, RN and GP competition carburetters, containing the following parts: - Air cable adjuster and locknut - Air barrel top - Air valve and nipple holder for air valve - Air valve spring. CNC manufactured, with top piece and adjusters in stainless steel with original Amal TT/RN Knurl and design. AUG 2023: NOW BACK IN STOCK can be shipped within 90 days |
Profiled/Lipped Bolt to Fit Original Amal Clip Fitting Inlet Rings (i.e. 276/289 and TT/RN Clip)Product no.: 1175 4/0+048SSThis listing is for the distiinctive shouldered and profiled hex head bolt that fitted to the Inlet ring on Amal Type 76/276 and Type 86/286 Stub Fitting Carburettors - it having the important function of ensuring the carb was securly located to the inlet stub. These are CNC manufactured by us to the original design in stainless steel and the heads lightly polished. They were also used on Competition TT/RN clip fitting carburettors. Price is each |
TT (and RN) Carburettor Washer KitProduct no.: 0164 36/006a- Full washer kit to fit original Amal TT and RN carburettors can be shipped within 60 days |
Cable Adjuster and Locknut (0.250" BSC) - Original Amal TT/RN Knurl (Air Slide) Type. SS - 2 PartsProduct no.: 0871 TT/Air2This is a cable adjuster and locknut with a 0.250" BSC thread, which is of the distinctive 'knurled' type that were originally fitted to Amal TT, RN and GP competition type Air Slides - however, they can also be used as throttle cable adjusters on other carb types - that had a similar thread, or a 1/4" through hole to take a similar adjuster. These are CNC manufactured in stainless steel. See listing for more detail. Price is per adjuster and nut. can be shipped within 90 days |
Throttle Cable Adjuster and Locknut to fit original Amal TT and RN Carb Tops - 2 PartsProduct no.: 0874 TT33602 part throttle cable adjuster and locknut to fit original Amal TT and RN competition carburetters (with 3/8" diameter BSC thread), CNC manufactured in stainless steel, but with the same profile and distinctive knurl as the original competition item. Price is per Adjuster and Locknut. Aug 2023 Update: Now back in stock can be shipped within 90 days |
New Throttle Twistgrip - Universal Cable - 37" Long: Adjuster in Middle of Cable: EachProduct no.: 1216 Cable01This listing is for a universal type throttle cable of 37^ in length, with nipples fitted either end - to fit most twistgrips and Amal carburettors. This cable type has an adjuster in the middle of the cable (about 6" below the twistgrip). Price is Each. |
New Throttle Twistgrip - Universal Cable - 37" Long: - Plain Type (no adjusters) : EachProduct no.: 1217 Cable02This listing is for a universal type throttle cable of 37^ in length, with nipples fitted either end - to fit most twistgrips and Amal carburettors. This is the 'plain' cable type - i.e. there is no adjuster fitted along the cable length. See listing for more information. Price is Each. |
New Throttle Cable - Spare Outer Cable Ferrule and Twistgrip Side Inner Cable Barrel: PairProduct no.: 1218 Cable03This listing is for a spare Throttle Cable (or choke/air/magneto type cable) outer cable ferrule, and a spare inner cable barrel of the type normally fitted on the twistgrip end of throttle cables. This item is useful if you have bought a throttle cable (see items 1216 and 1217) and need to then cut the cable to length or fit an adjuster. Price is per pair. |
21 - 30 of 63 results |
|