SOHC Cambox Rocker Rubber Pad - Set of 4Product no.: 0308 A11/815SOHC Cambox Rocker Rubber Pad Set: Cut/planed from hard wearing oil resistent rubber (Nitrile), to the same width and thickness as originals, Pack of 4. See detail listing for more information on fitting |
SOHC Rocker Box - Rubber Pad Roller (Hardened) - Per PairProduct no.: 0343 A11/816These are the half circular hardened steel plates that are located beneath the lower cambox rubbers, and which the rubber adjuster screws (A11/817) push against to ensure the lower cambox rubber's are held tight against the rocker arms. There are two per cambox, and are therefore sold as a pair |
SOHC Cambox Rubber Pad Bottom Adjusting ScrewProduct no.: 0064 A11/817SOHC Cambox Rubber Pad Bottom Adjusting Screw (Stainless Steel) - Original Length Type. CNC manufactured in stainless steel to original Norton pattern, with square adjusting head. Note: Youtube link in detail listing to see this part being made |
Reduced Hex Head Nuts for Cambox Rubber Adjusters - Stainless Steel (Each)Product no.: 0064b A11/818These are the special 'Reduced Hex' nuts, as originally fitted to the rubber pad (square) adjusting screw A11/817 - CNC manufactured in stainless steel to the original Norton pattern with Whitworth spanner size. Price is Each |
SOHC Cambox Rubber Pad Bottom Adjusting Screw - Longer TypeProduct no.: 0064L A11/817LSOHC Cambox Rubber Pad Bottom Adjusting Screw (Stainless Steel) - Longer Length Type. CNC manufactured in stainless steel to original design but fractionally longer shaft - see listing for more detail. Price is each |
SOHC Rocker Bearing Cork Side Washer - Standard (Each)Product no.: 0062 A11/813- Cork Washer, fits on either side of the rocker arm bearing - Fitting new cork washers helps keep the cambox oiltight. Cork thickness = 2.0mm (Std type) - Price is each. See detail listing for fitting information |
SOHC Rocker Bearing Cork Side Washer - Medium (Each)Product no.: 0062b A11/813M- Cork Washer, fits on either side of the rocker arm bearing - Fitting new cork washers helps keep the cambox oiltight. Cork thickness = 2.4mm (Med type) - Price is each. See detail listing for fitting information
|
SOHC Rocker Bearing Cork Side Washer - Thick (Each)Product no.: 0063 A11/813T- Cork Washer, fits on either side of the rocker arm bearing - Fitting new cork washers helps keep the cambox oiltight. Cork thickness = 3.0mm (Thick type) - Price is each. See detail listing for fitting information |
SOHC Camshaft Bevel Locating PegProduct no.: 0065 A11/773
- Peg used to retain large camshaft bevel gear to camshaft
- If your existing pin has any wear on it at all then it should be replaced, or false valve timings will be otained.
£7.80
*
|
SOHC Camshaft Oil Feed Plunger - Racing (M30/M40) Type CamboxProduct no.: 0066 A11M/792- This is the bronze plunger quill used to feed oil to the camshaft lobes if using a (pre-Featherbed) central oil feed SOHC cambox, i.e. Racing Internationals, M30/M40 and SOHC Manx Cambox's. Note Jan 2024: See Listing for Availability and detail |
41 - 50 of 88 results |
|