Your basket is empty.
Categories Items - Full Catalog 1.d Norton SOHC Cambox
1.d Norton SOHC Cambox
SOHC Rocker Arm Tappet Adjuster Assembly (3 Parts) - EachProduct no.: 0060 A11/803,4,5- 3 piece tappet adjuster set, including tappet pad, outer adjuster and full width locknut - Fits all SOHC rocker arms. - A very popular item, as these are one of the main consumables of this engine. Price is each 3-part assembly |
SOHC Rocker Arm Tappet Adjuster - Spare Nut (Each)Product no.: 0060b A11/803b- Spare top nut for the 3 piece tappet adjuster set. |
SOHC Rocker Arm Rocker Pads - EachProduct no.: 0061 A11/802
- Hardened rocker pads that press into the rocker arms
- high quality replacement for a part that is often badly worn
- This is for the standard shaft diameter item, which should be selected if the old item was a tight/press fit into the rocker arm. If the rocker arm had a loose fitting rocker pad then select an appropriate oversize rocker pad instead. - If you are unsure, but have an old rockepad to measure - these replacement items have a shaft diameter of exactly 0.312" (Std).
£19.00
*
|
SOHC Rocker Arm Rocker Pads: +0.002" Oversize - EachProduct no.: 0061b A11/802+2
- Hardened rocker pads that press into the rocker arms
- high quality replacement for a part that is often badly worn
- This description is for a rockerpad with a +0.002" (2 thou) oversize shaft. This can be used if you believe the hole of the rocker arm is worn and the old item had become a loose fit. - If you are unsure, but have an old rockepad to measure - these replacement items have a shaft diameter of exactly 0.314" (Std 0.312" + 0.002").
£19.00
*
|
SOHC Rocker Arm Rocker Pads: +0.005" Oversize - EachProduct no.: 0061c A11/802+5
- Hardened rocker pads that press into the rocker arms
- high quality replacement for a part that is often badly worn
- This description is for a rockerpad with a +0.005" (5 thou) oversize shaft. This can be used if you believe the hole of the rocker arm is very worn and the old item had become a very loose fit. - If you are unsure, but have an old rockepad to measure - these replacement items have a shaft diameter of exactly 0.317" (Std 0.312" + 0.005").
£19.00
*
|
1928 - 1937? Type - OHV/CS1 Rocker Arm Pad Type Tappet Adjuster/Nut - (2 Parts)Product no.: 1121 Pt-9163This Flat Bottomed Rocker Adjuster and Tapered Locknut are to fit the first SOHC Walter Moore (i.e. Cricket Bat type) and 1930 - 1937 OHV Models. They were fitted to CS1 models from 1927-1930 (approximately) and OHV models from 1929 - 1937. This type of rocker adjuster were fitted to the rear rocker arms and acted directly on the valves. We have CNC manufactured this type using an original early 1930's Norton item as the pattern and includes the correct profile locknut, with tapered bottom face, the locknut being in stainless steel. See listing for more detail. Price is for a single adjuster and locknut (i.e. 2 parts) |
1928 - 1937 Type - OHV/CS1 - Longer Type - Rocker Arm Pad Tappet Adjuster/Nut - (2 Parts)Product no.: 1122 Pt-9163LThis Flat Bottomed Rocker Adjuster and Tapered Locknut are a slightly longer version of the 9163 (Std length) adjuster fitted to early SOHC engines and most OHV models up to 1937. We modellecd this 5mm longer version on an original adjuster - that may have been modified, as at least one customer has requested a longer type. See Listing for more information. Price is for a single adjuster and locknut (i.e. 2 parts) |
1929 - 1937 - OHV and Walter Moore CS1 Tappet Adjuster Nut Only (Stainless Steel) - EachProduct no.: 1123 4095These are the distinctive 9/32" x 26tpi BSC tapered locknuts as fitted to the Norton OHV/Walter Moore CS1 Flat Pad type rocker adjusters (our items 1121 and 1122 from approximately 1929-37. These have been CNC manufactured in stainless steel to exactly the same dimensions as a Norton 1930's example. Note we also sell the locknut with the actual adjuster - see Item 1121 and 1122, but as the original nuts are often chewed or come loose and fall off - we sell them on their own here. Price is each (i.e. one locknut) |
Cam Rocker Arm Lipped Side WasherProduct no.: 0287 A11/814
For those rocker arms that are fitted with lipped side washers (which is by far the most common type of rocker arm – identifiable by its machined lip on each side of the bearing boss), these lipped washers (termed Steel Cup's in the 1948 catalog) are manufactuerd in hardwearing EN8 steel.
These fit over the rocker arm bearing on each side, and provide a flat face for the cork washers to seal against. 4 required per cambox.
£8.40
*
|
Cam Rocker Arm (Non-lipped) Side Washer/ShimProduct no.: 0288 3050For the earlier type rocker arms - which are identifiable by not having a machined recess to take the later 'lipped washer', I have had a batch of the cam rocker steel washers, that fit between the rocker arms and the cork washers |
| 31 - 40 of 88 results |
|
