1.a Norton SOHC Vertical Coupling and Bevel Parts

This is a set of 4 lower bevel shims, of the type fitted to later DOHC engines - those fitted with Coarse Bevel gears.  They have a larger central hole than the normal SOHC lower bevel shim - being just over 51mm diameter.  This is for a set of 4 shims in the following sizes:

0.5mm/0.3mm/ 0.2mm/0.1mm.  See listing for more detail on thicknesses.

This is for a single lower bevel shim, of the type fitted to later DOHC engines - those fitted with Coarse Bevel gears.  They have a larger central hole than the normal SOHC lower bevel shim - being just over 51mm diameter.  We can supply these shims in the following sizes: 

0.5mm/0.3mm/ 0.2mm/0.1mm/0.05mm.  See listing for more detail on thicknesses.

- Dished Washer that fits under the Lower Bevel (twin) ball bearing on all SOHC bottom bevel castings. Designed to capture any errant balls that should drop from the bearing (a very common fault) and an absolute essential to fit. Price is each

- This set consists of the special ' Reduced hex' nuts fitted to Norton SOHC upper and lower bevel castings, along with studs and spring washers - all in stainless steel.  Set consists of 8 nuts, 8 studs and 8 washers.  They are made to the same dimensions as original Norton items - but as everytihng is in stainless steel, and the nuts have nice crisp faces, they also look pretty as well.  Price is per set. 

These are the 5/16" BS Cycle Studs, fitted to both crankcase and cambox to retain Bevel Castings, manufactured to original dimensions in stainless steel.  Price is each

- The correct (reduced head) nut, used to retain both top and bevel castings, 4 nuts are used per casting. Our nuts are manufactured to the original 'Reduced Hex' Norton dimensions but are in stainless steel, and the hex faces are milled - so they also look very pretty, which is important as they are a particularly prominent and visual part of the SOHC engine

These 'Reduced Width' stainless steel spring washers are of the correct profile as used on all Upright and Laydown Norton gearbox covers and also the SOHC Vertical Bevel Housing Studs.  These are in stainless steel and of good UK quality, price is for a pack of 10

Vertical bevel housings were originally fitted with 'Reduced width' plain 5/16" washers - so they did not foul the bevel housings.  We did used to offer these, but have now replaced them with Item 0102 Stainless spring variety - see listing for more detail

Manufactured from seamless and ground polished stainless steel tubing, these SOHC Bevel tubes are manufactured with exactly the same pressed flange as the original items - this size being to fit 350cc SOHC engines. They look lovely when fitted with our stainless steel bevel tube union nuts.  Price is per tube

Manufactured from seamless and ground polished stainless steel tubing, these SOHC Bevel tubes are manufactured with exactly the same pressed flange as the original items - this size being to fit 500cc SOHC engines. They look lovely when fitted with our stainless steel bevel tube union nuts.  Price is per tube - see listing for more information