Your basket is empty.
Categories Items - Full Catalog 1.m Handlebars, Controls, Clocks, Cables
1.m Handlebars, Controls, Clocks, Cables
A selection of handlebars, handlebar controls, parts to fit period speedometer and rev clocks and cable/control accessories - for Nortons, and many other British models
Rev Clock/Speedo (Chronometric) Pointer - Later Type with Rectangular End (Each)Product no.: 1021 Speedo_18Chronometric speedometer or rev clock Needle - later type with a rectangular shape on the opposite end to the needle. Nicely made in brass with central boss. |
Smiths Speedo/Rev Clock Chronometric Bezel RingProduct no.: 0406 Speedo_01
Chromed bezel ring to fit all Smiths/Jaeger (80mm diameter) chronometric Speedometers and Rev Clocks. This is a high quality, UK made item. In the attached photos a genuine pre-war 120mph Smiths/Jaeger chronometric (it was originally fitted to a 1937 Norton International) speedo is used to give scale to the item and was used for testing all speedo items shown in this section
£24.00
*
|
Smiths Speedo/Rev Clock Chronometric Lipped Bezel RingProduct no.: 0407 Speedo_02Chromed and lipped bezel ring as used on Smiths (80mm diameter) chronometric Speedometers that would be mounted into binnacles and headlamp shells. The lip prevents the speedometer from dropping through the binnacle, and the speedometer is normally held in place by using a 'U' bracket from behind. |
Smiths type 80mm Screw on Chronomatic Flanged Bezel Ring - ChromedProduct no.: 0637 Speedo_12Smiths type 80mm Screw on Chronomatic Flanged Top Ring - Chromed, to fit those Speedos that are mounted in nacelles. |
Glass Support Ring for Chronometric Speedo/Rev ClockProduct no.: 0410 Speedo_05This is the recessed ring that fits snugly into the top of the speedo/rev clock case on chronometric (80mm) instruments and holds the glass in place |
3mm Glass for Chronometric Speedo/Rev ClockProduct no.: 0408 Speedo_03
This is a replacement glass for a chronometric (80mm) speedo or rev clock. It is 3mm thick, as per all early (1930s - 50's?) clocks. Nicely finished edges on glass (unlike some cheaper glasses I have seen)
£5.00
*
|
2mm Glass for Chronometric/Magnetic Speedo/Rev ClockProduct no.: 0409 Speedo_04
This is a replacement glass for a chronometric or magnetic (80mm) speedo or rev clock. It is 2mm thick. I am not entirely sure what 2mm glass was used for, but suspect it was fitted to later type Smiths speedos/rev clocks of the 50's-60's, maybe the magnetic type. Check your original glass if not sure
£4.50
*
|
Chronometric Under Bezel 'O' RingProduct no.: 0411 Speedo_06
This is the NBR060 'O' ring that fits in the recess under the chrome bezel of chronometric speedo/rev clocks. It ensures a watertight seal against the glass
£3.80
*
|
Speedometer Threaded Brass Insert - Light HolderProduct no.: 0413 Speedo_08This is the threaded brass ring, pressed into original Smiths (and Jaeger) road type speedometer and rev clock cases, which holds the light bulb assembly. If you have a non-illuminated case, or your orgiinal ring is damaged, this insert is a very useful fitting. See detail listing for more information
|
Chrome Trip KnobsProduct no.: 0414 Speedo_09
These are very nice chrome, straight knurled, knobs that were fitted to the end of the 'Trip' shaft, so the trip meter could be reset. They are very nice quality and are drilled so they can be attached to the trip shaft by means of a small split pin, as per originals. Often the trip knobs on original speedometers are missing, this will really set the speedometer off
£8.50
*
|
| 61 - 70 of 100 results |
|
