1.m Handlebars, Controls, Clocks, Cables

This item is for a 25" length (Chronometric) Speedometer Cable - of the original Norton pre-war type, where the speedometer drive gear was mounted on the front wheel and the speedometer drive cable was rubber sheathed.  Note This is a ''Short' type, as it was requested by customers who prefer the look sometimes adopted pre-war where the cable was virtually in line witht the girder fork leg.  For normal girder rubber type - See Item 1046.  See detail listing for more information. 

Good quality 36" rev clock cable, to fit post-war Norton International and Manx models fitted with chronometric rev clock.  This is the post-war type, with normal black waterproof outer covering.

This item is for a 38" length (Chronometric) Rev Clock Cable - of the correct length for Post-War Inter and Manx models with the rev clock drive on the front timing cover and Tele forks.  This is a good quality UK sourced cable - but with standard speedo cable covering (i.e. not the original pre-war rubbed sheathed variety, which we also offer).  

This item is for a 4ft 6 inch (i.e. 54") length (Chronometric) Speedometer Cable - of the type fitted to Post-War roadgoing models of rigid, plunger and swinging arm chassis type, where the speedo drive was fitted to the rear wheel and speedo was fitted in a central binnacle on the Norton Roadholder telescopic forks.  Good quality UK sourced cables.

This item is for a 4ft 9 inch (i.e. 57") length (Chronometric) Speedometer Cable - of the type fitted to Featherbed roadgoing models between 1954-57 - Featherbed Inter, ES2/Mod50 and early Featherbed Dominator models, where the speedo drive was fitted to the rear wheel and speedo was fitted in a central binnacle on the Norton Roadholder telescopic forks.  Good quality UK sourced cables.

Note: this cable may also fit later Featherbed twin models - but we are not experts in those models, so please check the length of cable required before ordering.  We can obtain other length speedometer and rev clock cables by special order

High quality reproduction 80mm Chronnometric Rev Clock Case (with no illumination hole, as used on competition bikes) for Smiths Rev Clock

High quality reproduction 80mm Chronnometric Rev Clock Case (with an illumination hole and threaded bulb insert, as used for road bikes with rev clock and lights fitted) for Smiths Rev Clock

High quality reproduction 80mm Chronnometric Speedometer Clock Case (with an illumination hole and threaded bulb insert), of the type with a hole at the bottom of the case for the Tripmeter reset

High quality reproduction 80mm Chronnometric Speedometer Clock Case (with an illumination hole and threaded bulb insert), of the type with a hole at the side of the case for the Tripmeter reset

Chronometric speedometer or rev clock Needle - early type with a peardrop shape on the opposite end to the needle.  Nicely made in brass with central boss.