3a. BTH KD1, Lucas Magneto/MagDyno and Ignition and HT Parts

This listing is for a bag of 6 small, neutral colour, cable ties - which are very useful for clipping to the rubber boots fitted over magneto advance/retard cables, rubber HT Pickup boots and those spark plug caps which have a rubber end.  Fitting these small cable ties very much helps prevent water sneaking in and affecting the electrics. Price is for a bag of 6 cable ties

These are the split brass washers that are soldered to the end of the HT lead that is screwed into Lucas and other similar magnetos that use screw in HT connections.  Using these washers give a good connection and retains the HT lead as the was.  Price is for pack of 4

Lucas early racing magneto serial plate. These were fitted to very early Lucas KR1 racing magneto's of the late 1920's and early 1930's, as fitted to the earliest CS1's and International engines. Very high quality reproduction plate in etched steel with black enamel infill

Lucas 'Racing Magneto' plate. As fitted to 1940's and 50's road racing NR1 and KVFTT type magnetos. Also fitted to Lucas 2MTT rotating magnet magnetos, as fitted to DOHC Manx Nortons from 1957. Very high quality reproduction plate in etched steel with red enamel infill

Lucas 'Racing Magneto' plate, with rounded ends. These would have been fitted to fitted to 50's road racing NR1 and some other similar type competition magnetos (very similar to the green label also used on some of these magnetos, mainly trials bikes, if green). Very high quality reproduction plate in etched steel with red enamel infill

This Lucas label, with Red colouring, is very similar to the extremely rare Lucas SR-R label, the racing magneto fitted to DOHC Featherbed Manx in the mid 1950's, prior to the introduction of the 2MTT rotating magnet magneto. In the 2nd photograph here, is my SR-R, with the remains of its original label. I am not sure why the reproduction label has an extra area of blank metal on the left of the label, but I think this will need to be carefully removed to fit into the indent correctly. Very high quality reproduction plate in etched steel with red enamel infill

This is the standard Lucas serial model and number plate, fitted to many Lucas magnetos from the 1930's to the 1960's. This includes the Lucas M01 Magdynos fitted to Norton Internationals and other Norton road models for many years, as well as KVF and K2F magnetos. Very high quality reproduction plate in etched steel with black enamel infill

Lucas Competion version of the Serial Number plate. This was most often seen fitted to K2FC and K1FC magnetos, but can occasionally be seen fitted to other competition and racing magnetos of the '50's and '60's era. High quality reproduction plate in etched steel with red enamel infill

Lucas 'Racing Magneto' plate - in green. This plate was used on racing magnetos of the '50's and '60's era, such as the Lucas NR1, as shown in accompanying photo. High quality reproduction plate in etched steel with green enamel infill