This section includes many electrical items of the type fitted to Norton roadgoing models from the 1930's to the 1950's. This includes a variety of headlamp units, tail lights, electrical wiring harneses and other electrical fittings and related parts for your restoration
New Lucas M01L (Mag/Dyno) - E3/E3L Dynamo Brushes - PairProduct no.: 1211 200290- These are the rectangular brushes fitted to the Lucas E3 and E3L Dynamo unit that sits atop the Lucas Magdyno unit, fitted to most Norton Single Cylinder roadgoing models. These brushes are to fit the E3(L) 2 brush type dynamo, fitted to Norton models from 1937 onwards. See detail listing for more information. Price is Per Pair |
Lucas Mag/Dyno Dynamo - Rubber Wiring Input Shroud (Each)Product no.: 0428 LUC008This is the distinctive rubber shroud that fits over the input wires on the pre-war and immediate post-war Lucas Dynamo - where those dynamos were fitted with a flat bakelite cover - see photos for details. Price is Each |
Slotted Screw Securing Lucas Dynamo To Magneto (Magdyno) - Stainless SteelProduct no.: 0454 200569As the description implies, this is the special slotted nut/screw that was used to secure the Lucas dynamo to the magneto (Lucas Mag/Dyno's) fitted to all Norton road-going models from 1930's to 1950's. This screw is very nicely made and identical to original, but in stainless Steel |
End Cover Clip to fit Lucas Mag/Dyno (Each)Product no.: 1026 Lucas32This is a nice quality reproduction of the spring type clip, used to retain the chromed pressed steel points cover on Lucas Magdyno units, as used on most Norton roadgoing singles from the 1930's through to the late 1950's. See detail listing for dimensions. Price is Each |
Cheesehead Screw Set to fit Lucas Mag/Dyno Front Cover - Pack of 4Product no.: 1025 Lucas31These are the fine thread screws that fit the Lucas Magdyno triangular front cover in place, as used on most Norton roadgoing singles from the 1930's through to the late 1950's. Nice shallow curve to the front of the screws, as per the originals. Price is for pack of 4 |
Magneto Platform Screws for OHV/SV Models - Lucas Mag/Dyno Type - Pack of 4Product no.: 0712 E3831These are the coarse thread countersunk screws that are used to secure the Lucas Mag/Dyno to the cast aluminium platform used on OHV and SV Norton singles. Price is for pack of 4 |
Norton WD Type Mag/Dyno Platform Casting - EachProduct no.: 1198 3711_WDThis is a nice reporduction of the Norton Magdyno (iron) platform, that was fitted to some Norton 16H WD models - but should also fit other pre-1948 SV and OHV models. See listing for more information before ordering. Price is Each |
Lucas Mag/Dyno Type LU463109 Fibre Gear: 58 Tooth - EachProduct no.: 1184 Lucas42This is the red fibre gear that was fitted to the magneto component of Lucas Mag/Dyno Units and was original Lucas Part Number LU463109 or 463109. This gear is 58 tooth. Price is Each |
Lucas Mag/Dyno Top Dynamo Strap and Bolts - EachProduct no.: 1185 Lucas43This is the steel strap (black painted) that secured the dynamo to the magneto on Lucas Mag/Dyno units. This is a nice quality reproduction and includes the original type hex securing screws (with screwdriver slot), which are plated steel, as well as the round pieces the bolts feed through. Price is per assembly |
Genuine Lucas - Magneto Pickup Hex Screws to Fit K2F Type Magnetos - PairProduct no.: 1192 Lucas47This listing is for a pair of hex (with screwdriver slot as well) Pickup Screws to fit Lucas K2F (twin cylinder) magnetos (as commonly fitted to many Norton twins, but should also fit KVF Vincent magnetos) - these screws being cadmium plated steel from the genuine Lucas authentic classic range. See listing detail for screwlength. Price is for a pair of screws |
31 - 40 of 69 results |
|