Parts to fit those gearbox/clutch's fitted to all single cylinder Norton models - particularly upright type gearbox
Norton Upright Gearbox - Cam Plate or Quadrant Spindle Washer - Pack of ThreeProduct no.: 0639 A2/346Norton Upright Gearbox - Cam Plate or Quadrant Spindle Washer - Pack of Three: these are the special, thick/wide pan washers used to secure the gearbox quadrant and lever arms on all Norton upright gearbox's (1933 type onwards), as well as gearbox quadrant on Laydown Norton gearbox's - Now in Stainless Steel |
Norton 1934-57 Upright and Laydown Gearbox Kickstarter SpringProduct no.: 0385 A2/367This is the gearbox kickstarter spring, as fitted to most Norton Upright and Laydown gearboxs (pre-AMC) from 1930's to late 1950's. Original kickstarter springs commonly wear on Norton gearbox's - often identifiable by the kickstarter moving backwards by its own accord on takeoff from standstill. Read the detail listing for fitting instructions |
Norton 1934-57 Upright and Laydown Gearbox Kickstarter Spring Cover (Machined from bar) - EachProduct no.: 1063 A2/358This is the gearbox kickstarter spring cover, of the type that was fitted on all roadgoing Norton model gearboxs from 1934 to 1957 (both Upright and Laydown type gearbox's). This item has been machined from solid steel bar, rather than the original pressed steel item - using a genuine 'New Old Stock' Norton item as the template. See listing for more information. Price is each. |
Norton 500T Trials Model Gearbox Kickstarter Spring - EachProduct no.: 1166 A2/367TThis is the gearbox kickstarter spring of the type fitted to genuine Norton 500T Trials models (i.e. from approximately 1949 - 53). Similar to the standard roadgoing models - genuine Trials gearbox's employed a shorter kickstart shaft, to give better foot clearance - hence the kickstart spring was also narrower. These springs are UK manufactured using a genuine 'New Old Stock' 500T kickstart spring as the pattern. Price is each. |
Sturmey Archer 1932-34 4-Speed Gearbox Kickstarter Spring (i.e. Mod30/40, Model 18) - EachProduct no.: 1066 9710This is the gearbox kickstarter spring fitted to the 4 Speed Sturmey Archer models from approximately 1932-34, visually similar to the Norton gearbox spring that followed it, this spring has a wider diameter. It is identifiable from earler Sturmey gearboxs in having one tang facing inwards, and the other facing backwards - See listing for more information. Price is each. |
Sturmey Archer 3 Speed Kickstarter Spring - 1920s Long Tang Type (Walter Moore CS1/ES2 Type) - EachProduct no.: 1065 4585This is the gearbox kickstarter spring fitted to the 3 Speed Sturmey Archer models that were fitted to Walter Moore Norton CS1 and ES2 models in the late 1920's, through to the first Arthur Carroll engines and other models, to approximately 1932. It has a long tang that protruded out and wrapped around the kickstart. See listing for more detail. Price is each. |
Sturmey Archer CS Gearbox Kickstarter Spring - Short Tang Type (Early 20's/Late 20's??) - EachProduct no.: 1064 5419(Early)This is the 'short tang' type gearbox kickstarter spring fitted to the 3 Speed Sturmey Archer CS type gearbox, and possibly other early Sturmey Archer gearbox's - both Norton and other marques, this most likely being for earlier, 1920's SV/OHV models - but please read all of this description listing and that of similar Item 1108 before orderingl Price is each. |
Norton Sturmey Archer CS Gearbox Kickstarter Spring - Long Tang Type (Late 20's/Early 30's) - EachProduct no.: 1108 5419This is the 'long tang' type gearbox kickstarter spring fitted to the 3 Speed Sturmey Archer CS type gearbox - as fitted to most Norton SV and OHV models in the mid 1920's to approximately 1932. We also sell a similar CS type spring with shorter tang (Item 1065), See listing detail for information on each type. Price is each. |
Norton Upright Gearbox Linkage Clevis Pins+Split Pins - PairProduct no.: 0357 A2/427These are a modern equivelant for the clevis pins used to connect the gear linkage on Norton gearbox's between the positive stop selector mechanism and the main gearbox selector plate. Listing is for 2 clevis pins and 2 split pins |
Norton Upright Gearbox Linkage Clevis Pins+Split Pins - Pack of 4Product no.: 0357B A2/427_4These are a modern equivelant for the clevis pins used to connect the gear linkage on Norton gearbox's between the positive stop selector mechanism and the main gearbox selector plate and often also fitted to Brake rod clevis's. Listing is for 4 clevis pins and 4 split pins |
41 - 50 of 103 results |
|