A selection of fasteners to fit Norton single cylinder motorcycles (mostly Stainlesss Steel) - including Cheesehead screw sets, chassis bolts, fasteners particular to Norton single models and also good quality generic stainless nuts, bolts and washer packs in Imperial sizes. Many of our special Norton single fasteners are CNC'd in house from high quality stainless, faithfully replicating original patterns from the 1920's-60's.
Norton Upright Gearbox Cover Stud (Stainless Steel) - All ModelsProduct no.: 0100 a2/307
This is the gearbox cover stud that fits into the shell of all upright gearbox's. An original was used as a pattern, these are identical, other than being manufactured in stainless steel. 7 are fitted per gearbox. Note: This item is slightly longer than the vertical bevel stud, it is 5/16" BSC both ends and can also be used as the Inlet Stud on cylinder heads - but check the thread on your head first, sometimes these are BSW.
£2.80
*
|
Norton Upright and Laydown Gearbox Clutch Cable Adjuster/Locknut - Nickel Plated Brass (Pair)Product no.: 0902 A2/247This Item listing is for the very distinctive conical shaped, knurled, gearbox clutch cable adjustment bolt and locknut - both CNC manufactured as faithful replica of the original Norton Item. Extremely useful for adjusting your cluth lever while sat on the bike, and normally the knurl has long since disappeared on original bolts. Manufactured in brass then nickel plateed as per the original. See listing detail for more information. Price is for bolt and matching locknut. |
Norton Upright/Laydown Gearbox: Clutch Cable Adjuster/Locknut - Lightened Racing Type (2 Parts)Product no.: 0903 A2/247MThis Item listing is for a 'lightened' version of the very distinctive conical shaped, knurled, gearbox clutch cable adjustment bolt and locknut. Similar to the normal road version - this version also has 6 holes bored radially around the conical part to reduce weight. Probably not original Norton practice, but as the original adjuster was quite heavy - a likely mod that will add 'bling' to your M30/M40 or Manx, while still allowing the benefits of this useful adjuster. See listing detail for more information. Price is for bolt and matching locknut. |
'Reduced Width' Gearbox and SOHC Vertical Bevel - Spring Washers (Stainless Steel) - 5/16" (per 10)Product no.: 0102 SW002These 'Reduced Width' stainless steel spring washers are of the correct profile as used on all Upright and Laydown Norton gearbox covers and also the SOHC Vertical Bevel Housing Studs. These are in stainless steel and of good UK quality, price is for a pack of 10 |
1947-50 Upright Gearbox - Complete SS Cheesehead Screw/Cover Bolt SetProduct no.: 0995 CH HD4Complete cheesehead screw/nut set for the 1947-49 roadgoing type Norton Upright gearbox - as fitted to SV/OHV/SOHC roadgoing models. Consists of 4 main cheesheads, 2 smaller 'inspection cover' type cheeseheads and botton stud spring washer and 5/16" BSC nut - all CNC'd by ourselves in stainless steel to the original Norton patterns. Price is for 8 items in total can be shipped within 60 days |
1947-50 Upright Gearbox - Inspection Cover SS Cheesehead Screw - PairProduct no.: 1003 CH HD8These are the two small screws used on the egg shape 'Norton' Clutch Worm adjuster inspection panel on 1947-50 type Norton Upright gearoboxs. This type of inspection cover was only fitted for small period of two years and the screw used was smaller than other Norton cheesehead screws - so they are hard to find. These are bar turned stainless steel with the correct thread and Norton gearbox head profile. Price is per Pair can be shipped within 60 days |
1951-56 Laydown Gearbox - Complete SS Cheesehead Screw/Cover BoltFiller Plug SetProduct no.: 0996 CH HD5Complete cheesehead and cover bolt set for Norton Laydown type gearoboxs, as fitted to all roadgoing Norton models and DOHC Manx Nortons from 1950-56. Set consists of 7 main cheesehead cover screws, 2 clutch worm inspection cover screws, 3 blind lower hex nuts and washer and the correct Norton type square slotted Filler Level Plug. All in stainless steel. All copied from original Norton patterns - see listing for details |
1951-56 Laydown Gearbox - Oil Filler Level Square Head/Slotted Plug Screw (Stainless Steel)Product no.: 0997 13765This is the distinctive oil level filler plug as fitted to all Laydown Norton Gearbox's (under and to the left of the kickstart boss) from 1951-56. As per the original it has the correct extra fine thread, square head, with screwdriver slot. Ours are CNC machined in Stainless Steel and also look vgery pretty. See listing for more information can be shipped within 60 days |
1933-50 Upright Gearbox: 'Works' Type Alloy Racing Gearlever Assembly for M30/Inter/SOHC Manx ModelsProduct no.: 0999 A11M/406WThis listing is for an alloy racing gearlever, complete with wasted gearbox bolt and locknut (to take lockwire) and correct SOHC Manx style gearlever rubber, to fit all Norton upright gearbox type splines - and has been faithfully reproduced from a genuine original SOHC Manx gearlever. See detail listing for more information. Update July 2023: We will be looking to make another batch of these in Autumn 2023 - please email to reserve one now |
Norton Oilbath Chaincase Central Retaining Nut - Stainless Steel (Each)Product no.: 1154 A2/495This is the distinctive large diameter, fine thread nut that fits centrally to retain the Norton Oilbath Chaincase outer cover. We CNC manufacture these in stainless steel, so as well as looking pretty - they will not rust. (Note we also sell the special lipped washer that fits behine this nut - see Item 0380). Price is Each. |
11 - 20 of 90 results |
|