A selection of fasteners to fit Norton single cylinder motorcycles (mostly Stainlesss Steel) - including Cheesehead screw sets, chassis bolts, fasteners particular to Norton single models and also good quality generic stainless nuts, bolts and washer packs in Imperial sizes. Many of our special Norton single fasteners are CNC'd in house from high quality stainless, faithfully replicating original patterns from the 1920's-60's.
Norton Telescopic Fork Leg - Replacement Manx Norton (Conical Hub) Brake Pin (Stainless Steel): EachProduct no.: 1040 E11M/611BThis item is the large diameter threaded brake pin that was screwed into the right hand side alloy fork slider on telescopic fork Manx Norton models, when fitted with the large conical type magnesium Manx Norton brake hub. These are CNC manufactured in stainless steel - but as can be seen from the photo - are supplied with the actual brake plate pin left in its un-milled state, as the slot for the brake plate should only be milled once the pin is screwed into position in the fork leg. See detail listing for more information |
Small/Straight 'Norton Type' Grease Nipple and Red Fibre Washer: (Each)Product no.: 0373 A2/500Imperial thread grease nipple of type similar to that originally fitted to Norton frame headstock races, Norton Gardengate rear plunger alloy sliders, and Norton brake pedals, with correct style and finish. Also comes with correct size red fibres washer. This listing for a single nipple and washer |
Small/Straight 'Norton Type' Grease Nipple and Red Fibre Washer: (Pack of 6)Product no.: 0373b A2/500Imperial thread grease nipple of type similar to that originally fitted to Norton frame headstock races, Norton Gardengate rear plunger alloy sliders, and Norton brake pedals, with correct style and finish. Also comes with correct size red fibre washer. This listing is for a pack of 6 grease nipples and red fibre washers |
Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Each)Product no.: 0374 A2/198Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access. Also comes with correct size red fibre washer. This listing is for a single grease nipples and red fibre washer |
Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Pack of 6)Product no.: 0374b A2/198Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access. Also comes with correct size red fibre washer. This listing is for a pack of 6 grease nipples and red fibre washers (slightly cheaper than when bought individually) |
Norton Long Roadholder - Drain Plugs and Washers (Stainless Steel): PairProduct no.: 1093 B2/612These are the drain plugs fitted into the base of the alloy Long type Roadholder telescopic fork legs, which allow the fork oil to be drained. These items are CNC machined in stainless steel to the original thread size and tolerance, with a nice quality head and milled slot in stainless steel. Each pair comes with 4 of our high quality red fibre washers - 2 per screw. Price is for a pair. See Item Description for more thread information
|
Fasteners - 3. Stainless Steel Imperial Nuts and Bolt SetsProduct no.: Fasteners 3Part 3 of the Fasteners Section lists:
Stainless Steel Nuts and Bolt Sets
- |
2BA x 1.00" Round Headed Screws - Stainless Steel: Pack of 4Product no.: 1176 2BA_1.00Pack of 4 x 1.00" long (overall length) x 2 BA Cheeseheaded screws in stainless steel. The threaded length is 0.875". Nice quality bolts. Ideal for applications such as controls, electrical fittings, small brackets etc. Price is for pack of 4 screws, in stainless steel |
1/4" x 5/8" BSC Bolt and Nut - Stainless Steel: Pack of 4Product no.: 0479b 025058BTNTSSPack of 4 x 5/8"" long x 1/4" BSC bolts (with plain heads - no writing on them) and nuts in stainless steel. Nice quality bolts. Ideal for applications such as attaching mudguards, stays, exhaust brackets, chainguards etc. Price is for 4 bolts and 4 nuts, in stainless steel |
1/4" x 7/8"" BSC Bolt With (Norton Type) Domed Head/Nut/Pan+Std Washer - Stainless Steel: Pack of 4Product no.: 1098 02500875SSPack of 4: 7/8" long x 1/4" Stainless Steel BSC bolts (with plain heads - no writing on them), and these bolts have the special 'Norton type' curved head, popular for various fastenings on Norton single models 1930's/50.s. These come with nuts fitted and one pan washer and one normal washer per bolt - all in stainless steel. Ideal for mudguards and attaching racing number plates and upholstery etc. Price is for a pack of four. Manufactured in UK and nice quality |
41 - 50 of 90 results |
|