A selection of fasteners to fit Norton single cylinder motorcycles (mostly Stainlesss Steel) - including Cheesehead screw sets, chassis bolts, fasteners particular to Norton single models and also good quality generic stainless nuts, bolts and washer packs in Imperial sizes. Many of our special Norton single fasteners are CNC'd in house from high quality stainless, faithfully replicating original patterns from the 1920's-60's.
1BA x 7/8" Cheesehead Screws for Handlebar Controls - Bar Turned - Per PairProduct no.: 0250 1BASS781 BA x 7/8" CNC bar turned Stainless Steel Cheesehead Screws - per pair. Most common size for handlebar fittings and other smaller fittings such as electrical. These items are CNC bar turned by ourselves with original Cheesehead style and look very pretty |
2BA x 7/8" Cheesehead Screws for Handlebar/Electrical Controls - Bar Turned - Per PairProduct no.: 0335 2BASS782 BA x 7/8" CNC bar turned Stainless Steel Cheesehead Screws - per pair. Common size for handlebar fittings such as the smaller electrical switch's. These items are CNC bar turned by ourselves with original cheesehead pattern and very pretty |
Fasteners - 2. Norton SIngles: Special FastenersProduct no.: Fasteners 2Part 2 of the Fasteners Section lists:
Norton Singles - Special Fasteners
- |
SOHC Pressure Adjuster Locknuts - Pack of 3Product no.: 0243b A11/43These are the special 5/16" x 26tpi Half Nuts - as fitted to oil pressure adjuster bolt (which does not have the length to allow a full nut), these are in stainless steel. Pack of 3 |
SOHC Oil Pump Securing Screw - PairProduct no.: 0609 A11/732Securing screw to fit SOHC oil pump - with reduced head. Price is per pair |
OHV/SV Models - Alloy Magneto/MagDyno Platform Bolt - Locking Plate - Dull Nickel (Each)Product no.: 1037 A2/118This unusual but distinctive looking plate/washer, was fitted on the Timing side of the Lucas MagDyno magneto platform bolt on all OHV and Side Valve models - and helped ensure that when the magneto bolt was fully tightened in the 'slotted' engine plate, it spread the load, to help prevent the magneto slipping and mag chain tension being lost. An original Norton item was used as the pattern for this item. See listing for more detail |
Norton Original Type - Girder Fork Clevis Pin Set With Greasing Holes - Stainless SteelProduct no.: 0345 3189SThese are the distinctive Norton Clevis Pins, as fitted to all Norton girder forks - employing either 'normal' conical checksprings, as well as the racing parallel type checksprings (also listed in this section). The distinctive pattern and style are identical to the original - but CNC'd machine in stainless steel - they allow greasing and look very pretty |
Norton Upright Gearbox - Gearlever Lubricating Bolt (SS) and Pan Washer (Pair)Product no.: 0671 A2_405This is the distinctive bolt fitted to the gear lever spline on all Norton upright gearbox's. This bolt was drilled through the centre to allow greasing of the seperate positive stop mechanism. CNC manufactured in stainless, comes complete with washer. Back In Stock - Oct 2023 |
Norton Upright Gearbox - Top Adjustment Bolt Washer - E5454 (Each)Product no.: 0461 E5454This is the special extra wide washer that fits behind the gearbox top primary chain adustment nut on upright gearbox's. We have these lasercut and then dull nickel plated washer with the very wide face, this washer fits behind the large nut on top gearbox bolt nut an is important iin helping to spread the load on upright gearbox top lugs (which often snaps if frame lug worn). Price is Each. |
Norton Girder Fork - Top Fork Grease Nipple and Retaining Bolt (Stainless Steel): EachProduct no.: 1008 9275mThese are the distinctive Norton girder fork - deep hex bolt and grease nipple that were sometimes fitted to the top spindle area of the front blades, and top crown clamp. They are in stainless steel to the original dimensions, using grease nipples of the original head shape and colour as originals. Price is Each. Read detail listing for more information |
21 - 30 of 90 results |
|