A selection of handlebars, handlebar controls, parts to fit period speedometer and rev clocks and cable/control accessories - for Nortons, and many other British models
New Throttle Twistgrip - Universal Cable - 37" Long: Adjuster in Middle of Cable: EachProduct no.: 1216 Cable01This listing is for a universal type throttle cable of 37^ in length, with nipples fitted either end - to fit most twistgrips and Amal carburettors. This cable type has an adjuster in the middle of the cable (about 6" below the twistgrip). Price is Each. |
New Throttle Twistgrip - Universal Cable - 37" Long: - Plain Type (no adjusters) : EachProduct no.: 1217 Cable02This listing is for a universal type throttle cable of 37^ in length, with nipples fitted either end - to fit most twistgrips and Amal carburettors. This is the 'plain' cable type - i.e. there is no adjuster fitted along the cable length. See listing for more information. Price is Each. |
New Throttle Cable - Spare Outer Cable Ferrule and Twistgrip Side Inner Cable Barrel: PairProduct no.: 1218 Cable03This listing is for a spare Throttle Cable (or choke/air/magneto type cable) outer cable ferrule, and a spare inner cable barrel of the type normally fitted on the twistgrip end of throttle cables. This item is useful if you have bought a throttle cable (see items 1216 and 1217) and need to then cut the cable to length or fit an adjuster. Price is per pair. |
Clutch and Brake Lever Assembly - 7/8" Plain Lever/Non-Competition TypeProduct no.: 0578 A2/224+6 £52.50 *can be shipped within 10 days |
Clutch Lever Assembly - 7/8" Plain Lever/Non-Competition TypeProduct no.: 0579 A2/224 £18.00 *can be shipped within 10 days |
Brake Lever Assembly - 7/8" Plain Lever/Non-Competition TypeProduct no.: 0580 A2/226 £18.00 *can be shipped within 10 days |
Magneto (LH) Lever - 7/8" diameterProduct no.: 0422 A2/213Pattern 7/8" handlebar diameter manual magneto lever - i.e. left handed type. Replica of Amal type 100, |
Norton Type Front Brake U Clip - Satin Nickel Plated (Each)Product no.: 0336 A2/709These front brake cable U Clips have been manufactured using an original 'New Old Stock' Norton 1930's/40's U-clip as the pattern (see photos). Ours are of the same gauge, and then linished and satin nickel plated. See detail listing for more information. Price is each |
Magneto (LH) Lever - 1" diameterProduct no.: 0658 A2/213_1Pattern 1" handlebar diameter manual magneto lever - i.e. left handed type. Replica of Amal type 100, |
Air Choke (RH) Lever - 7/8" diameterProduct no.: 0423 A2/216Pattern 7/8" handlebar diameter Choke/Air lever - i.e. Right handed type. Replica of Amal type 100, Note: although my supplier lists this as the same style as the corresponding magneto lever - I notice they are slightly different in their washer profile - this type being slightly more rounded in profile - still very nice for the price though |
Air Choke (RH) Lever - 1" diameterProduct no.: 0659 A2/216_1Pattern 1" handlebar diameter Choke/Air lever - i.e. Right handed type. Replica of Amal type 100 |
Exhaust Valve Lifter Lever Assembly: 7/8" Handlebar, Short Lever Type (Each)Product no.: 0581 A2/233This is a nice quality (UK sourcsed) 7/8" handlebar exhaust valve lifter. It is of the type normally fitted to all Norton single cylinder models (including SOHC models), and is commonly used to allow the exhaust valve to be llifted so the kickstart can be eased past compression to help starting. Price is Each. See detail listing for more information can be shipped within 10 days |
Exhaust Valve Lifter Lever Assembly: 7/8" Handlebar, Long Lever Type (Each)Product no.: 1085 A2/234bThis 7/8" handlebar diameter exhaust valve lifter is slightly longer than the other type we sell, with a slightly different design. See detail listing for more information. Price is Each.
can be shipped within 10 days |
Exhaust Valve Lifter Lever Assembly: 7/8" Handlebar, Short Lever Type (Each)Product no.: 1086 A2/234CThis 7/8" handlebar diameter exhaust valve lifter is of the short type, just right for hooking one finger around, if you do not like the longer types we also sell. See detail listing for more information. Price is Each.
can be shipped within 10 days |
New Red Button Type - Handlebar Magneto Cutout Button - 7/8" Handlebar Size - EachProduct no.: 1214 Cutout01Pretty Button type kill switch - with Red centre button, ideal for using as a magneto kill switch, or also as a horn switch if required. Fits 7/8" handlebars. Price is Each can be shipped within 10 days |
Controls - 2. Speedometer and Rev Clock Parts and other GaugesProduct no.: Controls 2Part 2 of the Controls and Gauges Section lists:
A selection of parts to fit original Smiths/Jaeger Speedometers and Rev Clocks and Other Gauges
- |
Rev Clock SOHC 30/40 M30/40 Gearbox 1:1 (None-Reversing): EachProduct no.: 0338 A11M\546_1This is a 1:1 (non-reversing) rev clock gearbox that can be fitted to any of our outer timing covers - and most other British motorcycles using this style of rev clock mount. They are excellent quality - and although not of the 1930's/40's bronze type (which are unobtainable now), they are of the slightly later design also fitted to British sports/racing bikes in 50's/60's and definitely look the part. UK manufactured. See Detail Listing for more information. Price is per unit |
Rev Clock SOHC 30/40 M30/40 Gearbox 2:1 (Non-Reversing): EachProduct no.: 0339 A11M\546_2This is a 2:1 (non-reversing) rev clock gearbox that can be fitted to any of our outer timing covers - and most other British motorcycles using this style of rev clock mount. They are excellent quality - and although not of the 1930's/40's bronze type (which are unobtainable now), they are of the slightly later design also fitted Manx Nortons and to most British sports/racing bikes in 50's/60's and definitely look the part. UK manufactured. See Detail Listing for more information. Price is per unit |
Pre-War Type - Rubber Sheathed Rev Clock Cable - 38" (Stainless Steel Ferrules)Product no.: 1045 A11M\55RThis item is for a 38" length Rev Clock Cable - of the pre-war type, that were rubber sheathed - for the ultimate in originality on your pre-war Inter or competition bike, if fitted with a Smiths Chronometric Rev Clock. We take a good quality proprietary rev clock cable, and add our own oil resistent black rubber sheathing, and stainless steel ferrules - the finished result is that authentic pre-War look. See detail listing for more information. |
Pre-War Type - Rubber Sheathed Front Wheel Speedometer Cable - 28" (Stainless Steel Ferrules)Product no.: 1046 3882This item is for a 28" length (Chronometric) Speedometer Cable - of the original Norton pre-war type, where the speedometer drive gear was mounted on the front wheel and the speedometer drive cable was rubber sheathed. Most roadgoing Norton singles (from late 1920s onwards until Post-War) had this configuraion and this type of speedometer cable provides the ultimate in originality for your pre-war Norton model. We take a good quality proprietary speedometer cable, and add our own oil resistent black rubber sheathing, and stainless steel ferrules - the finished result is that authentic pre-War look. See detail listing for more information. |
Pre-War Type - Rubber Sheathed Short Front Wheel Speedometer Cable - 25" (Stainless Steel Ferrules)Product no.: 1156 3882[S]This item is for a 25" length (Chronometric) Speedometer Cable - of the original Norton pre-war type, where the speedometer drive gear was mounted on the front wheel and the speedometer drive cable was rubber sheathed. Note This is a ''Short' type, as it was requested by customers who prefer the look sometimes adopted pre-war where the cable was virtually in line witht the girder fork leg. For normal girder rubber type - See Item 1046. See detail listing for more information. |
Rev Clock Cable (Normal Covering) - Pre or Post War Type - 36" LengthProduct no.: 0340 A11M\552Good quality 36" rev clock cable, to fit post-war Norton International and Manx models fitted with chronometric rev clock. This is the post-war type, with normal black waterproof outer covering. |
Rev Clock Cable (Normal Covering) SOHC Rev Clock Cable - 38" LengthProduct no.: 1047 3882(NR)This item is for a 38" length (Chronometric) Rev Clock Cable - of the correct length for Post-War Inter and Manx models with the rev clock drive on the front timing cover and Tele forks. This is a good quality UK sourced cable - but with standard speedo cable covering (i.e. not the original pre-war rubbed sheathed variety, which we also offer). |
Post-War (Pre-Featherbed) Rear Wheel Type Speedometer Cable - 4 Ft 6 Inch Length (Each)Product no.: 1049 B2/552This item is for a 4ft 6 inch (i.e. 54") length (Chronometric) Speedometer Cable - of the type fitted to Post-War roadgoing models of rigid, plunger and swinging arm chassis type, where the speedo drive was fitted to the rear wheel and speedo was fitted in a central binnacle on the Norton Roadholder telescopic forks. Good quality UK sourced cables. |
Featherbed (1954-57) Rear Wheel Type Speedometer Cable - 4 Ft 9 Inch Length (Each)Product no.: 1050 B4/552FThis item is for a 4ft 9 inch (i.e. 57") length (Chronometric) Speedometer Cable - of the type fitted to Featherbed roadgoing models between 1954-57 - Featherbed Inter, ES2/Mod50 and early Featherbed Dominator models, where the speedo drive was fitted to the rear wheel and speedo was fitted in a central binnacle on the Norton Roadholder telescopic forks. Good quality UK sourced cables. Note: this cable may also fit later Featherbed twin models - but we are not experts in those models, so please check the length of cable required before ordering. We can obtain other length speedometer and rev clock cables by special order |
80mm Chronometric Rev Clock Case (no illumination) for Smiths Rev ClockProduct no.: 0638 Speedo_13High quality reproduction 80mm Chronnometric Rev Clock Case (with no illumination hole, as used on competition bikes) for Smiths Rev Clock |
80mm Chronometric Rev Clock Case (With illumination hole) for Smiths Rev ClockProduct no.: 1022 Speedo_19High quality reproduction 80mm Chronnometric Rev Clock Case (with an illumination hole and threaded bulb insert, as used for road bikes with rev clock and lights fitted) for Smiths Rev Clock |
80mm Chronometric Speedometer Clock Case (With illumination hole) - Bottom Trip Hole TypeProduct no.: 1023 Speedo_20High quality reproduction 80mm Chronnometric Speedometer Clock Case (with an illumination hole and threaded bulb insert), of the type with a hole at the bottom of the case for the Tripmeter reset |
80mm Chronometric Speedometer Clock Case (With illumination hole) - Side Trip Hole TypeProduct no.: 1024 Speedo_21High quality reproduction 80mm Chronnometric Speedometer Clock Case (with an illumination hole and threaded bulb insert), of the type with a hole at the side of the case for the Tripmeter reset |
Rev Clock/Speedo (Chronometric) Pointer - Early Type with Peardrop End (Each)Product no.: 0643 Speedo_14Chronometric speedometer or rev clock Needle - early type with a peardrop shape on the opposite end to the needle. Nicely made in brass with central boss. |
31 - 60 of 100 results |
|