This section lists items specific to the RN (Remote Needle) carb, fitted to racing Norton's and many other pure competition bikes from 30's-early '50's - but many of the RN specific parts are now extremely hard to find. Also check the section for parts to fit Amal TT carbs - as many paarts were shared by both types and are listed in our TT carb section
Throttle Twistgrip - 'Top Hat' Cable Ferrule - Stainless Steel: EachProduct no.: 1178 ThrFerr1This very useful little item is a 'Top Hat' Ferrule - to fit original Doherty and other similar throttle twistgrips, which are not threaded at their cable end - and if you are using a throttle cable which has its threaded adjuster in the middle of the cable - therefore this 'Top Hat' ferrule will stop the cable sliding through the twistgrip hole. CNC manufactured by us in stainless steel. See item listing for more info. Price is each |
180 Degree (Norton Type) Banjo - To fit Original Amal TT and RN Carbs - Banjo + Washer SetProduct no.: 1155 14/251This is a reproduction of the original 180 Degree banjo that was fitted to Amal TT, RN and GP alloy froat chambers from the late 1930's onwards. This 180 Degree type was most commonly fitted to Norton SOHC (and Manx Norton) carburettors - and is much rarer to find than the '90 degree' type more commonnly fitted to other motorcycle marques using the Amal competition carburettors through to the early 1960s. See detail description for more information. Price is per each banjo, but includes the two red fibre washers fitted either side of these banjos - from a high quality manufacturer.
|
Red Fibre Washers - To Fit Original Amal TT/RN/GP Jet Holder and Banjos - (Pack of 6)Product no.: 0165B 36/006b- This is the red fibre washer that fits between the main Jet Holder and the float chamber (two being used at this point). The same washer is also used on the main banjo's used from 1940's onwards and fitted to TT's, RN's and GP's as well as Remote float chambers (again 2 fitted per banjo fitting. These washers are from a specialist supplier and are of the highest quality. This listing for a pack of 6 |
Red Fibre Washers To Fit Original Amal TT, RN and GP Jet Holder and Banjos (Pair)Product no.: 0165 36/006- This is the red fibre washer that fits between the main Jet Holder and the float chamber (two being used at this point). The same washer is also used on the main banjo's used from 1940's onwards and fitted to TT's, RN's and GP's as well as Remote float chambers (again 2 fitted per banjo fitting. High quality red fibre washer. Price is per Pair |
TT (and RN) Float Chamber Twin BanjoProduct no.: 0159 14/251B
- Banjo to fit TT and RN competition carburettors
£28.40
*
|
TT (and RN) Float Chamber Banjo NutProduct no.: 0160 14/255- Banjo Nut as fitted to original TT, RN and GP competition carburettors fitted with alloy floatchambers requiring the larger diameter banjo (either bottom mounted or top banjo Type 302 floatchamber). These banjo nuts have include the all important lockwire hole and are nicely finished in satin nickel plate. Price is each.
|
Original Amal TT/RN/GP Main Jets - Flat Hex Racing Type - All Sizes (Petrol and Alchohol)Product no.: 0901 TT/RN_OrigThese are genuine (old stock) Amal Racing main jets of the type originally supplied for Amal TT/RN/GP racing carburettors, identifiable by the hex part having no indent along its length (which all later Amal and modern jets have). All sizes are available, including many of the rarer large sizes. Price is Each |
Jet Key Tool for Fitting Amal Main JetsProduct no.: 0946 JetKeyUseful little box key spanner for fitting and unfitting main jets on most Amal carbs that used the standard type Amal Main Jets |
500cc TT/RN Carburettor Flange GasketProduct no.: 0452 A11/727
Paper gasket that fits on flange fitting TT/RN 500cc carburettors. This gasket should be changed each time the carb is removed and refitted. This gasket has a 1 3/16" / 30mm bore hole, suitable for most 500cc SOHC size carburettors
£2.40
*
|
350cc TT/RN Carburettor Flange GasketProduct no.: 0453 A10/727
Paper gasket that fits on flange fitting TT/RN 350cc carburettors. This gasket should be changed each time the carb is removed and refitted. This gasket has an approx 1 3/32" / 28mm bore hole, suitable for most 350cc SOHC size carburettors
£2.40
*
|
Copper Float Chamber - Type 14 Type (To Original Amal Design - Fits Amal 276/289, Amal TT/RN) - EachProduct no.: 0458 TT14FloatNEW July 2023: We are now able to offer these copper floats - to fit original Amal carburettors fitted with the Type 14 Float chamber - this include roadgoing Amal Type 76, 276 and 289 carburettors and competition Amal TT and RN carburettors. These floats are manufactured in the same style as original Amal floats - with two spun copper halfs, soldered in the middle - and a brass tube running through the centre of a float, with a 'press spring' at the top. See detail listing for more information. Price is Each |
Type 302 (TT/RN/GP) Floatchamber Remote Mount BanjoProduct no.: 0292 14/255RThis is the topfeed banjo used on Amal Type 302 floatchambers (used from the late 1940's), that allows the float chamber to be remote mounted. This item is drilled and tapped in its centre which provides the means to remote mount them. Price is Each |
14/024 Float Needle for Amal 276 and early TT FloatchambersProduct no.: 0613 14_024Float needle to fit the early (i.e. pre-war) Amal TT and Amal 276 type floatchambers - see listing detail for more information |
Float Tickler Kit - to fit Original Amal TT, RN and 276/289 Float Chambers - 4 PartsProduct no.: 0162 14/031(S)- 4 part tickler kit to fit original Amal TT, RN and 276/289 (standard size) float chambers. This float tickler fits the standard screw in (Type 76) floatchamber top - and is CNC machined by us to the original tickler design and dimensions. Satin nickel plated brass - as per the original items. See listing for more detail. |
Floatchamber Tickler Set to Fit Original Amal 302 Floatchambers (i.e. Amal RN and GP Comp Carbs)Product no.: 0174 302/TCK4 part tickler kit to fit original Amal 302 Floatchambers - as fitted to Amal RN and GP (and occasionally TT) carbs from the late 1940's through to the early 1960's. This float tickler design is very similar to the type fitted to most Amal 276/289, TT, and RN floatchambers - but the shaft is slightly longer than the tickler fitted to standard Amal floatchambers. Manufactured as per the original in brass, then satin nickel plated. See listing for more detail |
Lock Screw to fit Floatchamber Top Cover on Amal Type 276/TT/RN Carb (Stainless Steel)Product no.: 0163 14/021This lock screw is an exact copy of the type fitted to most types of Amal floatchamber screw covers - i.e those floatchambers fitted to Type 276, TT, RN or Dirt Track Carburettors - in fact almost all Amal float chambers that have a screw in top. |
Body Base Plug Screw - To Fit Late TT/RN/GP Float Chamber (Stainless Steel)Product no.: 0846 14/232- This is the base plug as fitted to the bottom of (non-remote type) alloy floatchambers on Amal TT and RN carburettors. CNC manufactured in stainless steel. Comes with correct imperial red fibre washer |
Body Base Plug Screw - To Fit Type Early TT/RN Float Chamber (Stainless Steel)Product no.: 0848 13/153[2]This is the base plug as fitted to the bottom of floatchambers on early type (early to mid 1930's?) Amal TT Floatchambers - it may also have been fitted to other Amal model types using seperate floatchambers - see detail listing for more background. CNC manufactured in stainless steel. Comes with correct imperial red fibre washer. |
Pilot Needle Leaf Spring - to fit original Amal TT/RN/GP Carburettors - EachProduct no.: 0157 TT/2982This is the distinctive leaf spring that fits against Knurled pilot needle on Amal TT, RN and GP carburettors, and helps with fine adjustment of the Pilot needle. See listing for more detail. Price is Each |
Tufnol Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 28mm Bore (i.e 350cc)Product no.: 0844a TTFlg_28mmTufnol spacer flange to fit between cylinder head and 'flange' type carburettors - i.e. Amal TT/RN, Monobloc and Concentric carbs. This listing is for a 28mm bore spacer, 6mm wide. See listing for details. Price per each. |
Tufnol Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 30mm Bore (i.e 500cc)Product no.: 0844b TTFlg_30mmTufnol spacer flange to fit between cylinder head and 'flange' type carburettors - i.e. Amal TT/RN, Monobloc and Concentric carbs. This listing is for a 30mm bore spacer, 6mm wide. See listing for details. Price per each. |
Tufnol Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 32mm BoreProduct no.: 0844c TTFlg_32mmTufnol spacer flange to fit between cylinder head and 'flange' type carburettors - i.e. Amal TT/RN, Monobloc and Concentric carbs. This listing is for a 32mm bore spacer, 6mm wide. See listing for details. Price per each. |
Insulating Flange Seal to fit Amal Flange Carbs - 26mm (1.00" 16H/ES2 etc)Product no.: 1105 FlgSl_26These insulatings seals are 3mm thick and this item is for an internal bore of 26mm (approx 1"), to fit flange fitting Amal carbs.(i.e. 2.00" between studs). These thick washers can seal as well as insulating the carb from excess engine heat.. See listing for details. Price per each. |
Insulating Flange Seal to fit Amal Flange Carbs - 32mmProduct no.: 1106 FlgSl_32These insulatings seals are 3mm thick and this item is for an internal bore of 32mm (i.e. larger bore), to fit flange fitting Amal carbs.(i.e. 2.00" between studs). These thick washers can seal as well as insulating the carb from excess engine heat.. See listing for details. Price per each. |
Insulating Flange Seal to fit Amal Flange Carbs - 22mm (i.e. 0.875")Product no.: 1107 FlgSl_22These insulatings seals are 3mm thick and this item is for an internal bore of 22mm (approx 0.875"), to fit flange fitting Amal carbs.(i.e. 2.00" between studs). These thick washers can seal as well as insulating the carb from excess engine heat.. See listing for details. Price per each. |
Alloy Finned Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 26mm BoreProduct no.: 0945A AllFlg_26mmAlloy finned 'flange fitting' spacer of the type often fitted to sports or racing motorcycles (and Cafe racers) in the 1950's-1960's. Fits those types of Amal carburettors with 2.0" stud distance flanges (i.e. TT/RN carbs, Monoblock, Concentric etc). This type is 26mm Bore (other sizes available, see listing) |
Alloy Finned Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 32mm BoreProduct no.: 0945C AllFlg_32mmAlloy finned 'flange fitting' spacer of the type often fitted to sports or racing motorcycles (and Cafe racers) in the 1950's-1960's. Fits those types of Amal carburettors with 2.0" stud distance flanges (i.e. TT/RN carbs, Monoblock, Concentric etc). This type is 32mm Bore (other sizes available, see listing) |
Petrol Tap (1/4 BSP Type) - Dowty Style Petrol Proof Washers - PairProduct no.: 0845 PetWsh3A pair of Dowty type sealable washers to fit 1/4 BSP Petrol Taps. Price is for a pair of washers |
Throttle Cable Adjuster to fit Original Amal Monobloc and Road Type Carburettors (no locknut)Product no.: 0958 9/035Throttle cable adjuster - of the type with tapered top hex, the same as fitted to original Monobloc and 276 roadgoing Amal carburettors - as well as later Amal carburettors. Price is Each |
Stainless Steel Oil/Fuel Pipe End Ferrule - 5/16" ID BSP Pipe Size (14mm OD Pipe) - EachProduct no.: 0979a Ferrule2This item is a stainless steel oil/fuel pipe ferrule to fit black rubber style 5/16" internal diameter BSP pipe - of the type often used on Norton models for cambox pipes, breather pipes or similar - but this type will fit over pipe with an OD of 14mm. These are UK manufactured by a specialist ferrule maker. See listing for detail |
31 - 60 of 63 results |
|