This section lists items specific to the RN (Remote Needle) carb, fitted to racing Norton's and many other pure competition bikes from 30's-early '50's - but many of the RN specific parts are now extremely hard to find. Also check the section for parts to fit Amal TT carbs - as many paarts were shared by both types and are listed in our TT carb section
Pilot Needle to fit Original Amal TT and RN Carbs - Early (Short Knurl) Pre-War to 1951 Type (Each)Product no.: 1115 2967- High quality early type (i.e. pre-War and pre 1951'ish) Pilot Needle to fit original Amal TT and RN carburettors. These tapered needles control the slow running and are often worn on originals. This is the rare to find early design which was fitted up until approximately 1951, it having a distincvitve design with a shorter knurl than the later type. See listing for more detail. Price is Each. can be shipped within 15 days |
Pilot Needle to fit Original Amal TT and RN Carbs - Later (Long Knurl) Post War Type (Each)Product no.: 0154 TT/2981- High quality Pilot Needle to fit original Amal TT and RN carburettors. These tapered needles control the slow running and are often worn on originals. This is the later type most often seen fitted from late 1940s onwards - identifiable by a long knurl and screwdriver slot. See listing for more detail. Price is Each can be shipped within 15 days |
TT/RN Carb - Brass Pilot Needle InsertProduct no.: 0155 TT/2966- Brass pilot needle insert to fit in both original Amal TT, RN and GP competition carbs (all types) - these screw into the carburettor body, then the Pilot Adjuster Needle Screw screws into this brass insert. Price is Each can be shipped within 15 days |
Air Adjuster Spring or Early Type Throttle Spring to fit Original Amal TT/RN carbs (Each)Product no.: 0850 TT SpringThis is the spring of the correct dimensions to fit the Amal TT/RN/GP air adjuster assembly. It is also of the type shown fitted to earlier Amal TT and RN carburettors, before the introduction of conical springs on competition carburettors. See listing for details |
RN Mixing Chamber Cap Ring to fit original Amal 10RN Carbs (chromed brass) - EachProduct no.: 1057 185/330- Lovely quality chromed chamber cap to fit all original 10RN (Remote Needle) Amal Carburetters, CNC manufactured to original design in the UK, including UK chroming. (note RN top rings are a bigger diameter than the similar TT type top ring). Update November 2021: newly arrived and look really nice - see detail listing for more information |
RN Needle Cap and Prayer Book Spring (sold as a pair)Product no.: 0167 185/120+106This is the distinctive Remote Needle Alloy Cap and 'Prayer Book' spring fitted to Amal RN Remote Needle carburettors - the two components listed as a matching pair. Together, they fit over the Remote Needle part of the main body alloy casting of the main Amal RN body. This listing is for both components' |
RN Prayer Book Spring (Spring Only)Product no.: 0805 185/106- This is the distinctive 'Prayer Book' spring fitted to Amal RN Remote Needle carburettors. It fits over the alloy cap that blanks the Remote Needle part of the casting, where the needle sits. This listing is for the spring only |
10TT BellMouth - Short Length: To fit Amal 10TT CarburettorsProduct no.: 0140a TT/BellS- 'Short' type bellmouth to fit original Amal 10TT carburettors . High quality CNC machined from an original bellmouth pattern. Available in various internal diameter's - including those to fit both 350 and 500 variation SOHC Nortons |
10TT/RN BellMouth - Medium Length: To fit Amal 10TT and RN CarburettorsProduct no.: 0140b TT/BellM- 'Medium type bellmouth to fit original Amal 10TT and RN (Remote Needle) carburettors . High quality CNC machined from an original bellmouth pattern (see photo) . Available in various internal diameter's - including those to fit both 350 and 500 variation SOHC Nortons |
10TT/RN/GP BellMouth - Long Length: To fit Amal 10TT, RN and GP CarburettorsProduct no.: 0140c TT/Bell_L- Long type bellmouth to fit original Amal 10TT and RN (Remote Needle) carburettors. Can also be fitted to 10GP1 .carbs High quality CNC machined from an original bellmouth pattern (see photo) . Available in various internal diameter's - including those to fit both 350 and 500 variation SOHC and early DOHC Nortons |
11 - 20 of 63 results |
|