1.n Norton Chassis and Fabricated Parts

- These rear engine plates are laser cut, to fit 350cc Norton Model 40 Internationals and CSJ (aluminium crankcase) for both Rigid and Plunger frames.

- These rear engine plates are to  laser cut, using original SOHC Manx engine plates as original and are to fit 1935 - 1950 M30/early Manx rigid and plunger chassis with 500cc magnesium crankcases. They will also fit if you have post 48-50 350 Manx crankcases 

- These rear engine plates are laser cut, using original SOHC Manx engine plates as an original and are to fit 1935 - 48 350cc M40/Manx chassis (both rigid and plunger frames)

- These laser cut brackets can be brazed or pressed onto a tube that feeds over the Norton footrest bar if your original brackets are bent or damaged, as so many often are. They are designed to hold the distinctive kidney shaped Norton rubbers.  come as a set of 4 brackets - see detail listing for more information

These laser cut brackets can be brazed onto your original footrests, as they are often missing or damaged - this type is of racing type where the outer one had an ear - this type being smaller than original, with more chance of passing modern scrutineering if racing

- These laser cut brackets can be brazed onto your original footrests, as they are often missing or damaged. They are designed to hold the distinctive kidney shaped Norton rubbers - these are replicated from an original SOHC Manx model and have a distinctive shape on the outer bracket with a large vertical tab to stop the foot coming off the footrest in competition.  Item consists of 4 bracket plates 

Pair of classic Norton 'D' shaped footrest rubbers, with Norton embossed on them as per originals, as fitted to all Norton roadgoing singles and pre-Featherbed race bikes

This Norton footrest set consists of the Norton 'D' type rubbers, the complete tube and both 'D' shape plates, as well as the two long bolts that hold the rubber footrests in place. Price is for pair of complete assemblies (see detail listing for more information).

These pillion footrest hangers and Norton embossed footrest rubbers are a good replica of the heavyweight pressed steel type fitted to Norton single models through the 1930's to 1950's - i.e. most Rigid and Plunger framed road going models.  They come as a pair.  See listing for more detail

Nice copy of the pillion footrest rubber - as shown in the 1948 Norton Spares catalog . . . which are of the correct type used in conjunction with the pressed steel footrest hangers which were used by Norton's on all Rigid and Plunger framed models of the 1930's/40's/50's. Embossed with Norton logo.