This section includes many parts to fit original BTH KD1 competition magnetos (as fitted to the majority of competition Norton SOHC models), as well as other parts for competition Lucas magnetos and roadoging Mag/Dyno's.
It also contains a selection of period veteran and vintage HT leads, spark plugs and spark plug accessories.
See also section 3.b for general electrical components and wiring system for your motorcycle
New Lucas M01L (Mag/Dyno) - E3/E3L Dynamo Brushes - PairProduct no.: 1211 200290- These are the rectangular brushes fitted to the Lucas E3 and E3L Dynamo unit that sits atop the Lucas Magdyno unit, fitted to most Norton Single Cylinder roadgoing models. These brushes are to fit the E3(L) 2 brush type dynamo, fitted to Norton models from 1937 onwards. See detail listing for more information. Price is Per Pair |
New Lucas 18D2 and D1A2 Distributor Cap Brush and Spring (See Listing) - EachProduct no.: 1212 404435This is the pickup brush and spring - as fitted to Lucas 18D2 Distributors (as fitted to Triumph 21 models) and D1A2 Distributors (Sunbeam S7 and S8 models), as well as the Type 45D Distributor Cap, fitted to many classic cars. Price for brush and spring |
Lockwired Housing Screws - Lucas Comp Type: NR1 Road Racing Mag Type : Stainless Steel - EachProduct no.: 0861 Lucas016- Stainless steel hex head, drilled for lockwire housing screws of the correct specification to original Lucas competition NR1 Road Racing magnetos (which were not slotted) Stainless Steel. Price is Each |
Lucas HT Lead Cover or Short Adv/Retard Cable Shroud (Each)Product no.: 0437 LUC011Similar to part 0372 except shorter, this shroud is of the type used as the HT Lead cover on many Lucas magnetos, but as the photograph shows - can also be used as a shorter version of the advance/retard cable cover, Price is each
|
Lucas K2F 'D' Shaped - HT Pickup Gasket (Lucas 458364) - EachProduct no.: 1223 458364This is the thick 'D' Shaped gasket that fits underneath the HT pickup fitted to Lucas K2F Type magnetos, where the HT Pickup is held by a clip. These are high quality UK manufactured gaskts. Price is Each. |
Lucas K1F/KVFTT and BTH Flange GasketProduct no.: 0442 T2191Triangular magneto flange fitting 3 point paper gasket, as fitted to Vincent KVFTT (and BTH Grey Flash equivelant) as well as Vincent Comet/Rapide K1F/KVF and all flange fitting magnetos. |
New Red Button Type - Handlebar Magneto Cutout Button - 7/8" Handlebar Size - EachProduct no.: 1214 Cutout01Pretty Button type kill switch - with Red centre button, ideal for using as a magneto kill switch, or also as a horn switch if required. Fits 7/8" handlebars. Price is Each can be shipped within 10 days |
HT Cable - Ochre and Black Cloth : Sheathed Competition Lead 1920's-40's (per ft)Product no.: 0732 KD1 028- Woven cloth HT lead of the type originally used on many competition and roadgoing motorcycles from the early 1920's through to the 1940's. Ochre/Orange in colour with black flecks - this HT lead is sheathed in a durable and waterproof covering that gives a very authentic look - as per the celluloid covering of the original period HT lead. Price is per foot |
HT Cable - Yellow and Black PVC : Competition Lead 1950's-60'sProduct no.: 0199 KD1 024
- I have finally been able to find a batch of the correct type of PVC yellow and black competition HT lead, as used on almost every type of competition magneto from the 1950's onwards (recently this type of cable has been very difficult to obtain). Price is per foot.
£2.60
*
|
HT Cable - Black Rubber TypeProduct no.: 0197 KD1 014
- Black Rubber HT Cable, as fitted to many British bikes as original equipment. Sold per foot.
£1.60
*
|
41 - 50 of 96 results |
|