This section lists items specific to the RN (Remote Needle) carb, fitted to racing Norton's and many other pure competition bikes from 30's-early '50's - but many of the RN specific parts are now extremely hard to find. Also check the section for parts to fit Amal TT carbs - as many paarts were shared by both types and are listed in our TT carb section
Tufnol Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 30mm Bore (i.e 500cc)Product no.: 0844b TTFlg_30mmTufnol spacer flange to fit between cylinder head and 'flange' type carburettors - i.e. Amal TT/RN, Monobloc and Concentric carbs. This listing is for a 30mm bore spacer, 6mm wide. See listing for details. Price per each. |
Tufnol Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 32mm BoreProduct no.: 0844c TTFlg_32mmTufnol spacer flange to fit between cylinder head and 'flange' type carburettors - i.e. Amal TT/RN, Monobloc and Concentric carbs. This listing is for a 32mm bore spacer, 6mm wide. See listing for details. Price per each. |
Insulating Flange Seal to fit Amal Flange Carbs - 26mm (1.00" 16H/ES2 etc)Product no.: 1105 FlgSl_26These insulatings seals are 3mm thick and this item is for an internal bore of 26mm (approx 1"), to fit flange fitting Amal carbs.(i.e. 2.00" between studs). These thick washers can seal as well as insulating the carb from excess engine heat.. See listing for details. Price per each. |
Insulating Flange Seal to fit Amal Flange Carbs - 32mmProduct no.: 1106 FlgSl_32These insulatings seals are 3mm thick and this item is for an internal bore of 32mm (i.e. larger bore), to fit flange fitting Amal carbs.(i.e. 2.00" between studs). These thick washers can seal as well as insulating the carb from excess engine heat.. See listing for details. Price per each. |
Insulating Flange Seal to fit Amal Flange Carbs - 22mm (i.e. 0.875")Product no.: 1107 FlgSl_22These insulatings seals are 3mm thick and this item is for an internal bore of 22mm (approx 0.875"), to fit flange fitting Amal carbs.(i.e. 2.00" between studs). These thick washers can seal as well as insulating the carb from excess engine heat.. See listing for details. Price per each. |
Alloy Finned Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 26mm BoreProduct no.: 0945A AllFlg_26mmAlloy finned 'flange fitting' spacer of the type often fitted to sports or racing motorcycles (and Cafe racers) in the 1950's-1960's. Fits those types of Amal carburettors with 2.0" stud distance flanges (i.e. TT/RN carbs, Monoblock, Concentric etc). This type is 26mm Bore (other sizes available, see listing) |
Alloy Finned Flange to Fit Amal TT/RN/Monobloc/Concnetric Carbs - 32mm BoreProduct no.: 0945C AllFlg_32mmAlloy finned 'flange fitting' spacer of the type often fitted to sports or racing motorcycles (and Cafe racers) in the 1950's-1960's. Fits those types of Amal carburettors with 2.0" stud distance flanges (i.e. TT/RN carbs, Monoblock, Concentric etc). This type is 32mm Bore (other sizes available, see listing) |
Petrol Tap (1/4 BSP Type) - Dowty Style Petrol Proof Washers - PairProduct no.: 0845 PetWsh3A pair of Dowty type sealable washers to fit 1/4 BSP Petrol Taps. Price is for a pair of washers |
Throttle Cable Adjuster to fit Original Amal Monobloc and Road Type Carburettors (no locknut)Product no.: 0958 9/035Throttle cable adjuster - of the type with tapered top hex, the same as fitted to original Monobloc and 276 roadgoing Amal carburettors - as well as later Amal carburettors. Price is Each |
Stainless Steel Oil/Fuel Pipe End Ferrule - 5/16" ID BSP Pipe Size (14mm OD Pipe) - EachProduct no.: 0979a Ferrule2This item is a stainless steel oil/fuel pipe ferrule to fit black rubber style 5/16" internal diameter BSP pipe - of the type often used on Norton models for cambox pipes, breather pipes or similar - but this type will fit over pipe with an OD of 14mm. These are UK manufactured by a specialist ferrule maker. See listing for detail |
51 - 60 of 63 results |
|