1.l Norton Fasteners (mostly SS) - Bolts, Cheesehead Screws, Washers, Screws etc to fit Norton Single Models

We have these lasercut and then dull nickel plated washers with wide face for spreading load on Norton rear wheel spindles. These were originally fitted to Norton single rear wheels but are nearly always missing when restoring a bike (not available commercially, which is why we made them). Price is for a pair of washers

Lasercut and then dull nickel plated washers to fit the 0.5" front engine bolt (i.e. the bolt that secures the front engine plates to the frame down tube). Normal 0.5" commercially available washers are too wide, these are much closer to the original washers. Price is for a pair of washers

Stainless Steel pan washers of the same size as those used on the Upright gearbox pointer bolt or rear of Norton chaincases where they attach to the rear engine plate mount stud (help stop chaincase from splitting). Stainless Steel. Price is for a pair

This item is for a pair of the correct shape and profile, alloy plugs that were fitted into the top of the rear Plunger spindles that were fitted to all Norton Gardengate frames - from 1939 to the early 1950's.  Original plugs are often badly damaged, broken off or have just come out making the top of the plunger suspension area look messy.  These plugs are CNC manufactured to be lightly tapped into the original spindle holes and will greatly improve the appearance of the rear end, where they sit quite prominently.  The plug heads are lightly linished and polished.  Price is per pair of plugs 

This item is for a pair of complete rear wheel adjuster assemblies - with all parts patterned as per the original items, to fit Gardengate Plunger Norton Models (singles and twins).  It consists of two fabricated wheel spindle holders (that wrap around the alloy plunger castings), two distinctive square head bolts - of the correct profile, two dished plates, two washers and four adjuster bolts - the locknuts being a smaller spanner sise than the main nuts - all as per the original Norton design.  The fabricated spindle holders are in nickel plated steel, while all the other parts are CNC manufactured in stainless steel.  Price is for two complete assemblies (i.e. enough for one bike).  See Detail listing for more information

This item is for a pair of the distinctive dished caps that were fitted to the rear of all Norton Gardengate Plunger suspension castings (i..e plunger frames manufactured from 1939 to the early 1950's on all models), and fitted over the alloy castings, allowing for adjustment of the rear chain adjuster.  These items are copied from an original pattern and are CNC manufactured in stainless steel, so will not rust and look very pretty.  Price is for a pair of the caps

This item listing is for a pair of the distinctive square headed rear wheel adjustment bolts, adjustment nuts and locknuts, to fit Gardengate Plunger Norton Models. The 'Gardengate' was the plunger type spring frame that Norton adopted for all sprung models from 1939, through to the early 1950's an was offered for OHV and SOHC roadgoing singles, pre-Featherbed (Dominator) twins and the racing model Manx Nortons from 1939-50.  All parts CNC made in stainless steel with correct BSC threads.  See detail isting for more information 

This item is for 4 of the correct profile and spanner size 5/16"nuts to fit the original Gardengate Plunger rear wheel adjusters, CNC manufactured in stainless steel.  The main adjuster nuts are double chamfered and deeper than commercially available nuts, while the adjuster nuts are 'reduced head', i.e. a smaller spanner size than normal 5/16" nuts, to allow for easier adjustment - both types being replicated from the original Norton nuts.  Price is for 4 nuts. 

This item is for a pair of the correct, original Norton pattern, bolts and extra heavy washers that were fitted to the bottom of plunger spindles to Norton Gargengate type (plunger) frames.  The set consists of 2 CNC manufactured bolts, 2 washers in stainless steel and are identical in pattern to originals.  See detail listing for more information 

This item is for a pair of the extra thick washers that were fitted under the head of the plunger spindle bolt on Norton Gardengate plunger frames.  They were made extremely thick, so when the bolt was tightened, it would pull the plunger spindle taper into the bottom frame casting without bending.  These are as per the originals in thickness, but in stainless steel so will not rust.  Price is per pair.