Rubber components to fit Norton single cylinder motorcycles, and other British bike restorations
Competition Lever - Stainless Steel Cable Nipple Holder Barrel/Circlip (Each)Product no.: 0332 A11M/819This barrel and circlip is of the type that was fitted to those competition clutch or brake levers that did not have a slot in the blade for the cable to feed through. CNC machined in stainless steel and supplied with circlip - see listing detail for more information. Price is for one barrel and circlip |
Rubber Stops for Non Ballended Levers - PairProduct no.: 0337 CtrlRbr1Bullet style gearchange rubbers (as fitted to BSA Bantams) for fitting to non-ballended clutch and brake levers, as a safety feature. This was a period mod before the introduction of ballended levers (or the special plastic lever shields made in the '60's). |
BTH KD1 (and Lucas Manual Magnetos) - Advance/Retard Cable Abutment - Rubber Shroud (Each)Product no.: 0372 KD1 027
Rubber cable shroud to stop water running down the advance\retard cable and into the mechanism. This shroud is of the type fitted to BTH KD1 magnetos, but is also very similar to the Lucas variety as well (and can be used on both)
£3.30
*
|
Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Each)Product no.: 0374 A2/198Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access. Also comes with correct size red fibre washer. This listing is for a single grease nipples and red fibre washer |
Lucas Mag/Dyno Dynamo - Rubber Wiring Input Shroud (Each)Product no.: 0428 LUC008This is the distinctive rubber shroud that fits over the input wires on the pre-war and immediate post-war Lucas Dynamo - where those dynamos were fitted with a flat bakelite cover - see photos for details. Price is Each |
Cable Tie: 3.5" Wobbly Type (Black) - Pack of 5Product no.: 0431 CTIE01Reproduction 3.5" rubber cable tie, of the 'wobbly' type. suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 5. |
Cable Tie: John Bull Type, Size A (Black) - Pack of 4Product no.: 0432 CTIE02Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'A' (also inscribed on cable tie) which are 3 3/4" long . suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 4. |
Cable Tie: John Bull Type, Size A (Grey) - Pack of 4Product no.: 0432b CTIE02GReproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'A' (also inscribed on cable tie) which are 3 3/4" long . suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 4. This type is in an attractive Grey colour |
Cable Tie: John Bull Type, Size B (Black) - Pack of 4Product no.: 0433 CTIE03Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'B' (also inscribed on cable tie) which are 4 1/2" long . suitable for securing wiring and cables on the smaller and medium frame tubes. Sold as a pack of 4. |
Cable Tie: John Bull Type, Size C (Black) - Pack of 4Product no.: 0434 CTIE04Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'C' (also inscribed on cable tie) which are 5 1/4" long . suitable for securing wiring and cables on the medium and larger frame tubes. Sold as a pack of 4. |
41 - 50 of 58 results |
|