SOHC All Models - Mainshaft Timing Side Shim - Set of 5 Shims

Product no.: 0263b A11/46a-s

In stock

£19.00
Recommended Retail Price, plus delivery


Essential when rebuilding your engine to ensure that the conrod sits central in the crankcase and that the roller bearing inner cage on the drive side does not have excess play on the crankshaft.

I normally start the shimming process with this shim, which sits between crankshaft and timing side main bearing, to ensure the conrod sits central, before shimning the other (Drive) to take up excess clearance between crankshaft and roller bearing inner race.

This is for a complete set of 5 shims in the following sizes:

0.5mm/0.3mm/0.2mm/0.1mm/0.05mmNote - shim steel is now supplied in metric thicknesses, but these are offered in the nearest equivelant to the old Imperial sizes that were commonly used - i.e.

0.5mm = 0.021" or 21 thou (for some reason the actual thickness is 0.53mm which = 21 thou) 

- 0.3mm = 0.012" or 12 thou

- 0.2mm = 0.008" or 8 thou

- 0.1mm = 0.004" or 4 thou

- 0.05mm = 0.002" or 2 thou

It is common practice to measure float with no shims fitted, then add one or multiple shims to reach the desired final endfloat, measuring each time shims are added or subtracted 

Bagged in DuckOil to protect from corrosion

Customers who bought this product also bought

*
Recommended Retail Price, plus delivery

Browse these categories as well: 1.j Norton Gaskets/Seals for SOHC, OHV, SV Models, 1.e Norton SOHC Crankshaft Parts