2.a Parts to fit: Original Amal TT Competition Carburettors

2.a Parts to fit: Original Amal TT Competition Carburettors

High quality parts to fit origingal Amal TT racing carburettors - late 1920's-1950s (Note: some parts shared with road carbs - but see also our 276/289/Monobloc section )


Display per page
Sort by
1 - 30 of 93 results

Amal TT and Other Competition related Carb Parts - Information Section

Product no.: 0136b Info4

Listed here are reproduction parts to fit Amal TT carburettors (and other competition carb parts) . There were many variations of TT carburettors made over the years, but the majority of parts shown here will cover all models - or be marked specific to a year.  Amal roadgoing carbs now seperated into their own section

£0.00 *

Castrol ValveMaster Plus - Lead Replacement Plus Octane Booster - 250ml Bottle

Product no.: 0614 Octane1

Castrol ValveMaster Plus - Lead Replacement Plus Octane Booster - 250ml Bottle

£23.00 *
In stock
can be shipped within 30 days

Driven Defender/Booster - Lead Replacement Plus Octane Booster - 295ml Bottle

Product no.: 0685 Octane2

Driven Defender and Booster - Lead Replacement Plus Octane Booster - 295ml Bottle

£16.00 *
In stock
can be shipped within 30 days

Full Specification and Tuning Sheets for Original Amal TT, RN and GP Carburetters - Facsimile

Product no.: 0136 WKM003

- This is a full and comprehensive catalog, listing good quality reproductions of original Amal specification and tuning sheets for the Amal TT, RN (Remote Needle) and GP competition model carburettors, and also includes a full list of settings for SOHC Norton models when fitted with these models as well as a comprehensive setup guide from period Norton technical guides for these carburettors.  This is a 50+page plus facsimile document containing copies of many rare original Amal spec sheets in A4 format.  Price is Each

£17.00 *
In stock

Pilot Needle to fit Original Amal TT and RN Carbs - Early (Short Knurl) Pre-War to 1951 Type (Each)

Product no.: 1115 2967

- High quality early type (i.e. pre-War and pre 1951'ish) Pilot Needle to fit original Amal TT and RN carburettors.  These tapered needles control the slow running and are often worn on originals. This is the rare to find early design which was fitted up until approximately 1951, it having a distincvitve design with a shorter knurl than the later type. See listing for more detail. Price is Each.  

£26.00 *
In stock
can be shipped within 15 days

Pilot Needle to fit Original Amal TT and RN Carbs - Later (Long Knurl) Post War Type (Each)

Product no.: 0154 TT/2981

- High quality Pilot Needle to fit original Amal TT and RN carburettors.  These tapered needles control the slow running and are often worn on originals. This is the later type most often seen fitted from late 1940s onwards - identifiable by a long knurl and screwdriver slot. See listing for more detail. Price is Each

£26.00 *
In stock
can be shipped within 15 days

TT/RN Carb - Brass Pilot Needle Insert

Product no.: 0155 TT/2966

- Brass pilot needle insert to fit in both original Amal TT, RN and GP competition carbs (all types) - these screw into the carburettor body, then the Pilot Adjuster Needle Screw screws into this brass insert.  Price is Each

£18.00 *
In stock
can be shipped within 15 days

TT/RN/GP Carb Pilot Needle Inner Spring

Product no.: 0156 TT/2980

This is the small coil spring that fits inside the Pilot Needle assembly on original Amal TT, RN and GP carburettors.  See listing for more detail. Price is each

£3.30 *
In stock

Pilot Needle Leaf Spring - to fit original Amal TT/RN/GP Carburettors - Each

Product no.: 0157 TT/2982

This is the distinctive leaf spring that fits against Knurled pilot needle on Amal TT, RN and GP carburettors, and helps with fine adjustment of the Pilot needle.  See listing for more detail. Price is Each

£6.50 *
In stock

TT/RN Pilot Needle Rear Plug Screw - Stainless Steel

Product no.: 0158 TT/2403

- Small screw that fits on to the body behind Pilot Needle on Amal TT and RN racing carburettors - Like the throttle adapter peg, this item is often found rusty on original carbs

£4.00 *
In stock

180 Degree (Norton Type) Banjo - To fit Original Amal TT and RN Carbs - Banjo + Washer Set

Product no.: 1155 14/251

This is a reproduction of the original 180 Degree banjo that was fitted to Amal TT, RN and GP alloy froat chambers from the late 1930's onwards.  This 180 Degree type was most commonly fitted to Norton SOHC (and Manx Norton) carburettors - and is much rarer to find than the '90 degree' type more commonnly fitted to other motorcycle marques using the Amal competition carburettors through to the early 1960s.  See detail description for more information.  Price is per each banjo, but includes the two red fibre washers fitted either side of these banjos - from a high quality manufacturer.

 

£27.00 *
In stock

TT (and RN) Float Chamber Twin Banjo

Product no.: 0159 14/251B
- Banjo to fit TT and RN competition carburettors
£28.40 *
Not in stock

TT (and RN) Float Chamber Banjo Nut

Product no.: 0160 14/255

- Banjo Nut as fitted to original TT, RN and GP competition carburettors fitted with alloy floatchambers requiring the larger diameter banjo (either bottom mounted or  top banjo Type 302 floatchamber). These banjo nuts have include the all important lockwire hole and are nicely finished in satin nickel plate.  Price is each.

 

£19.00 *
In stock

Type 302 (TT/RN/GP) Floatchamber Remote Mount Banjo

Product no.: 0292 14/255R

This is the topfeed banjo used on Amal Type 302 floatchambers (used from the late 1940's), that allows the float chamber to be remote mounted. This item is drilled and tapped in its centre which provides the means to remote mount them. Price is Each

£21.00 *
In stock

Red Fibre Washers - To Fit Original Amal TT/RN/GP Jet Holder and Banjos - (Pack of 6)

Product no.: 0165B 36/006b

- This is the red fibre washer that fits between the main Jet Holder and the float chamber (two being used at this point). The same washer is also used on the main banjo's used from 1940's onwards and fitted to TT's, RN's and GP's as well as Remote float chambers (again 2 fitted per banjo fitting. These washers are from a specialist supplier and are of the highest quality.  This listing for a pack of 6

£4.00 *
In stock

Red Fibre Washers To Fit Original Amal TT, RN and GP Jet Holder and Banjos (Pair)

Product no.: 0165 36/006

- This is the red fibre washer that fits between the main Jet Holder and the float chamber (two being used at this point). The same washer is also used on the main banjo's used from 1940's onwards and fitted to TT's, RN's and GP's as well as Remote float chambers (again 2 fitted per banjo fitting. High quality red fibre washer. Price is per Pair

£1.90 *
In stock

10TT Throttle Slide To Fit Original Amal TT Carbs (Various cutaways and LH/RH options) - Each

Product no.: 0143 134/104V

High quality Throttle Slides to fit original Amal 10TT Carburettors in a selection of cutaways - both LH (normal) and RH Sided types available.  Manufactured to a high standard in UK - see Detail Listing for more information and Norton cutaway information.  Price is Each. 

Update December 2021: New batch now available - see detail listing for update

from £98.00 *
In stock

10RN Throttle Slide/Needle Holder to fit Original Amal 10RN Carbs - 5 and 6 Cutaway's Avail (Each)

Product no.: 0961 RN134/107

'Remote Needle' type throttle slide and needle holder to fit original Amal 10RN (Remote Needle) type racing carburetter - these been original fitment on most 1937 onwards SOHC (and pre-1953 DOHC)  M30/M40 and Manx models. These slides are UK manufactured to the same dimensions and fixing process as the original RN slides. Cutaway type No5 and No6 LH slides available. Price Each.  See detail listing for information. Dec 2021: Now available for sale

 

£125.00 *
In stock

Conical Throttle Spring to fit Amal TT/RN/GP Carburettor

Product no.: 0144 TT/2558

- Correct type conical throttle spring to fit Amal TT. RN and GP racing Carburetter's

£7.40 *
In stock

Air Adjuster Spring or Early Type Throttle Spring to fit Original Amal TT/RN carbs (Each)

Product no.: 0850 TT Spring

This is the spring of the correct dimensions to fit the Amal TT/RN/GP air adjuster assembly.  It is also of the type shown fitted to earlier Amal TT and RN carburettors, before the introduction of conical springs on competition carburettors.  See listing for details 

£3.80 *
In stock

Throttle Needle to fit Original Amal 10TT and 15TT Carburettors (Each)

Product no.: 0147 TT/3971

Throttle needle to fit original Amal 10TT and 15TT Carburettors.  See listing for more details. Price is each.

£16.00 *
In stock
can be shipped within 15 days

TT/RN (and most Roadgoing Amal models) Throttle Needle Clip

Product no.: 0148 4/230

Carburetter needle clip - as fitted to original Amal TT competition carbs as well as many roadgoing carbs - i.e. Amal 76/276, 79/289 and monobloc carburettors. Price each

£2.60 *
In stock

Throttle Needle to fit Original Amal 10RN (Remote Needle) Carburettors - Each

Product no.: 0169 185/119

Throttle Needle to fit original Amal RN Carburettors (i.e T10RN and 10RN9 types).  Similar in appearance to the TT type throttle needle - but specific to the RN (Remote Needle) competition carburettor - this needle type are now very difficult to find.  Price is Each.  Update Dec 2022: New batch now available - see listing for detail

£18.00 *
In stock

Circular RN Throttle Needle Clip - to fit original Amal RN Carbs (Original Design) - Each

Product no.: 1138 185/150

This is the distinctive lipped circular spring that was used on original Amal Remote Needle (RN) competition carbs to hold the throttle needle to the side bar attached to the throttle slide on Amal RN carbs.  This spring was circular, so that it would fit into the circular shaped Remote Needle part of the carb casting.  Our clips are identical to the original design, and an original spring was used as a pattern.  Price is each - see detail listing for more information

£5.70 *
In stock

GP6 Throttle Needle - 'Weak' Type - to fit original Amal GP10 and GP15 Carburettors - Each

Product no.: 1141 GP10W

This is a throttle needle to fit original Amal Type 10GP and the smaller 15GP Racing Type carburettors. This is the 'Weak'' type needle (identified by a '6' after the number), but we can also supply the alternate 'Normal' type - See listing for more detail.  Price is Each

£15.00 *
In stock

GP Throttle Needle - 'Normal' Type - to fit original Amal GP10 and GP15 Carburettors - Each

Product no.: 1140 GP10N

This is a throttle needle to fit original Amal Type 10GP and the smaller 15GP Racing Type carburettors. This is the 'Normal' type needle, but we can also supply the alternate 'Weak' type (identified by a '6' after the number) - See listing for more detail.  Price is Each

£15.00 *
In stock

5GP Throttle Needle - 'Normal' Type - to fit original Amal GP5 Carburettors - Each

Product no.: 1142 GP5N

This is a throttle needle to fit original Amal Type 5GP Racing Type carburettors. This is the 'Normal' type needle, but we can also supply the alternate 'Weak' type (identified by a '6' after the number) - See listing for more detail.  Price is Each

£15.00 *
In stock

5GP6 Throttle Needle - 'Weak' Type - to fit original Amal GP5 Carburettors - Each

Product no.: 1143 GP5W

This is a throttle needle to fit original Amal Type 5GP Racing Type carburettors. This is the 'Weak'' type needle (identified by a '6' after the number), but we can also supply the alternate 'Normal' type - See listing for more detail.  Price is Each

£15.00 *
In stock

3GP Throttle Needle - 'Normal' Type - to fit original Amal GP3 Carburettors - Each

Product no.: 1144 GP3N

This is a throttle needle to fit original Amal Type 3GP Racing Type carburettors. This is the 'Normal' type needle, but we can also supply the alternate 'Weak' type (identified by a '6' after the number) - See listing for more detail.  Price is Each

£15.00 *
In stock

3GP6 Throttle Needle - 'Weak' Type - to fit original Amal GP3 Carburettors - Each

Product no.: 1145 GP3W

This is a throttle needle to fit original Amal Type 3GP Racing Type carburettors. This is the 'Weak'' type needle (identified by a '6' after the number), but we can also supply the alternate 'Normal' type - See listing for more detail.  Price is Each

£15.00 *
In stock
*
Recommended Retail Price, plus delivery
1 - 30 of 93 results