1.n Norton Chassis and Fabricated Parts

1.n Norton Chassis and Fabricated Parts

A selection of chassis parts to fit Norton SOHC, OHV and Sidevalve single cylinder models.  These include engine plates, footrest parts, suspension and spring components to fit Rigid, Plunger and swinging arm models.  Wherever possible, original Norton components are used as the template to replicate these parts


Display per page
Sort by
61 - 86 of 86 results

Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Pack of 6)

Product no.: 0374b A2/198

Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access.  Also comes with correct size red fibre washer.  This listing is for a pack of 6 grease nipples and red fibre washers (slightly cheaper than when bought individually)

£16.00 *
In stock

Norton Rigid Rear Stand - to Fit International and OHV/SV Rigid Bikes

Product no.: 0420 A2/542

This is a reasonable reproduction of the Norton rear stand fitted to Rigid framed Nortons, i.e. the pre-war rigid framed Norton International and pre/post war rigid framed SV/OHV machines. Price is each.  Dec  2021:  Out of stock, see listing for more information

£94.50 *
Not in stock

Norton Rigid Frame Type - Rear Stand Spring

Product no.: 0426 A2/543

Spring to fit rigid framed Norton singles on the rear stand. Profile is the same as original. Comes in black stove enamelled finish

£18.00 *
In stock

Exhaust Megga - For SOHC Norton and Norton Singles

Product no.: 0443 A11M/167_1

This is a proprietary reproduction open 'megga' exhaust trumpet with a small reversed lip at the end. It is 1.750" exhaust bore, so will fit Norton SOHC bikes, and as it has no baffles fitted should make a very fruity noise! 

£57.80 *
Not in stock

Exhaust Megga With Baffles - For SOHC Norton and Norton Singles

Product no.: 0444 A11M/167_2

Nice quality Exhaust Megga, with baffles fitted, so a nice choice for your 1950's style Cammy Norton or sports bike (i.e. ES2 cafe racer), as it is to fit 1.750" pipe as fitted to all Norton singles 

£63.00 *
In stock

Exhaust Clip 1.750" Diameter. HD Quality (Each)

Product no.: 0445 A2/168_1

Exhaust pipe clip to fit Norton 1.750" Diameter exhaust pipes as fitted to all Norton singles - HD quality item with fixing bolt and nyloc nut 

£6.50 *
In stock

Exhaust Clip 1.750"

Product no.: 0446 A2/168_2
Exhaust pipe clip to fit Norton 1.750" Diameter exhaust pipes as fitted to all Norton singles. This clip does not come supplied with bolt, but is designed to take a 1" x .250" bolt.
£3.80 *
In stock

Exhaust Clip 2"

Product no.: 0447 A2/168_3
Exhaust pipe clip to fit 2" Diameter exhaust pipes. I bought a couple of these to fit my Vincent 2" Black Lightning pipes, but also useful if you are fitting an oversize silencer clamp. This clip does not come with fixing bolt but is designed to take a 1" x .250" bolt.
£3.80 *
In stock

Norton All Singles (SOHC/OHV/SV) : Front Engine Bolt (i.e. Frame Downtube) Washers - Pair:

Product no.: 0463 11809

Lasercut and then dull nickel plated washers to fit the 0.5" front engine bolt (i.e. the bolt that secures the front engine plates to the frame down tube). Normal 0.5" commercially available washers are too wide, these are much closer to the original washers. Price is for a pair of washers

£3.40 *
In stock

Propstand

Product no.: 0479 A2/360

Cheap and cheerful reproduction of a proprietary British propstand. This type of propstand would normally clamp to the lower gearbox to rear wheel frame rail. 

£34.00 *
In stock

Reduced Head Racing Mudguard/Number Plate Bolts - Pack of 4

Product no.: 0483 0250MDGD1

These 1/4" x 0.750" stainless steel bolts (supplied with nut and washers) have a head reduced to the absolute minimum and slight 5/16" shoulder on the shaft, which allows a 5/16" washer to be fitted - which provides a wider surface area than if a 1/4" washer was used - which is better for use with flattened mudguard stays and when fitting racing number plates. Sold as a pack of 4

£19.00 *
Still in stock

New Girling Shock Absorber Spring Retaining Clips - Stainless Steel (Pack of 4)

Product no.: 0560 GIRL001

An unusual item this - but these are good quality stainless steel clips that are used to retain the springs on Girling classic shock absorbers - as fitted to Featherbed Manx Nortons and most Norton swinging arm/Featherbed models from the mid 1950's onwards. 

£24.00 *
In stock

1BA x 7/8" Cheesehead Screws for Handlebar Controls - Bar Turned - Per Pair

Product no.: 0250 1BASS78

1 BA x 7/8" CNC bar turned Stainless Steel Cheesehead Screws - per pair. Most common size for handlebar fittings and other smaller fittings such as electrical. These items are CNC bar turned by ourselves with original Cheesehead style and look very pretty

£5.60 *
In stock

2BA x 7/8" Cheesehead Screws for Handlebar/Electrical Controls - Bar Turned - Per Pair

Product no.: 0335 2BASS78

2 BA x 7/8" CNC bar turned Stainless Steel Cheesehead Screws - per pair. Common size for handlebar fittings such as the smaller electrical switch's.  These items are CNC bar turned by ourselves with original cheesehead pattern and very pretty

£5.50 *
In stock

Tax Disc Holder : Halycon Type - Stainless Steel

Product no.: 0582 TaxDisc1

Classic 'Halycon' Style Tax Disc Holder, this model being in Stainless Steel so it will not tarnish or rust.  

Although it is no longer a legal requirement to fit tax disc's, all historic bikes would have originally been fitted with them - so in my view, no restoration would be complete without fitting a tax disc holder - and I use this type on some of my bikes.

Update Jan 2016:  To go with these tax disc holders, I will soon be able to offer facsimile historic Tax Discs which will be tailored to include your own bike details.  I am hoping eventually to have these available for all years from the 1930's - to 1970's.  For the moment, I am able to offer 1961,1962,1972 - see photograph 3 for an example using one of my own bike details.  Please email for details if you require a facsimile tax disc 

£15.00 *
In stock
can be shipped within 10 days

Front Number Pate

Product no.: 0584 A2/531

Front Number plate, painted with a black finish.

This number plate has a sporty rake on on one side (which would be facing the rear of the bike.  However - if you prefer the symetric shape that was adoped on some bikes (i.e. the Vincent used a symetric front number plate commonly), then it is a simple job to copy the shape of the other end onto a cardboard template and then use this as a template to help cut away the 'rake' part on the other end, leaving a symetric style plate.  I have done this with one of these plates when fitting one to my Vincent Comet restoration

£11.00 *
In stock
can be shipped within 10 days

Telescopic (Es-Way Replica) Prop Stand

Product no.: 0615 Stand3

This is a beautifully made copy of the original pre-war Es-Way telescopic prop stand - a great add on for any 1920's-1950's British rigid (and possibly plunger) motorcycle and a period piece that would like great and in keeping on your roadgoing Norton International - or any rigid Norton for that matter!  

£165.00 *
Not in stock

All Norton Pre-Featherbed Models - Head Race Bearing - Ball Sets

Product no.: 0217 A2/521

- Full set of headrace balls - both top and bottom race - to fit all Norton single frames - 34 balls in all (the correct amount for top and bottom races), plus one spare in case you drop one!, 34 + 1 = 35.

£24.00 *
In stock

7/16" Stainless Steel Spring Washer (Alternative Reduced O/D Engine Bolt Washer) : Bag of 10

Product no.: 0695 SW005

7/16" Stainless Steel Engine Bolt Spring Washers.  Alternative to item 0661 - Reduced Outer Diameter plain washers.  Used on Norton 7/16" Engine Bolts with reduced hex heads as used on SOHC engines: Price is for bag of 10

£4.20 *
In stock

1/4" BSF Forged Nut - Stainless: Pack of 10

Product no.: 0490F 0250FORG

Pack of 10 1/4" BSF stainless steel nuts - commercially available forged type, fractionally smaller width than our 'full nut' type, but often better for smaller bolts and cheaper than the full nuts.  same TPI as BSC bolts and interchangeable

£7.00 *
In stock

1/4" BSC Machined Nut - Stainless: Pack of 10

Product no.: 0490 0250FNSS

Pack of 10 1/4" BSC stainless steel nuts - higher quality 'Full nut' than most commercial types 

£10.50 *
In stock

1/4" x 5/8" BSC Bolt and Nut - Stainless Steel: Pack of 4

Product no.: 0479b 025058BTNTSS

Pack of 4 x 5/8"" long x 1/4" BSC bolts (with plain heads - no writing on them) and nuts in stainless steel. Nice quality bolts. Ideal for applications such as attaching mudguards, stays, exhaust brackets, chainguards etc.  Price is for 4 bolts and 4 nuts, in stainless steel

£11.00 *
Not in stock

2BA x 1.00" Round Headed Screws - Stainless Steel: Pack of 4

Product no.: 1176 2BA_1.00

Pack of 4 x 1.00" long (overall length) x 2 BA Cheeseheaded screws in stainless steel. The threaded length is 0.875". Nice quality bolts. Ideal for applications such as controls, electrical fittings, small brackets etc.  Price is for pack of 4 screws, in stainless steel

£5.00 *
In stock

Tyre Inner Tube Valve Caps - 'Period' Steel Type - Per Pair

Product no.: 0840 TvalveCap1

Period Style (i.e. early 1900's to 1950's) Valve Caps - Pair

£2.90 *
In stock

Vincent Black Lightning (1000cc) - Alloy Footrest Hanger Plates

Product no.: 0436 FT106/2+108/1

Correct alloy footrest assemby hanger plates for Vincent Black Lightning 1000cc racing motorcycle, lasercut from correct thickness alloy plate from original Black Lightning templates, then lightly linished.  Sold as pair

£61.00 *
In stock

Vincent Grey Flash (Racing 500cc) - Alloy Footrest Hanger Plates

Product no.: 1017 FT106/2_2

Correct footrest assemby hanger plates for Vincent Grey Flash 500cc racing motorcycles. Lasercut from correct thickness alloy plate and lightly Linshed.  Copied from an original hanger plate. Sold as pair

£61.00 *
In stock
*
Recommended Retail Price, plus delivery
61 - 86 of 86 results