1.f Norton SOHC Timing Case & Crankcase Parts

1.f Norton SOHC Timing Case & Crankcase Parts
Norton SOHC Timing Case and Crankcase Parts

Display per page
Sort by
91 - 100 of 100 results

SOHC M30/M40 (i.e. for early Manx) Driveside Mainshaft Outer Oil Spacing Ring(s) - (Pr)

Product no.: 0656 A10/33

- These are the Bearing Spacer(s) that fits between the two driveside main bearings on M30/M40 magnesium crankcase pre-Featherbed crankcases

£34.00 *
In stock
can be shipped within 10 days

SOHC M30/M40 (i.e. for early Manx) Driveside Mainshaft Inner Bearing Spacer(s) - (Pr)

Product no.: 0657 A11M/835

- These are the inner bearing spacer(s) that fits between the two driveside main bearings on M30/M40 magnesium crankcase pre-Featherbed crankcases - they are used to provide the correct width between driveside ball and roller inner races

 

£20.00 *
In stock
can be shipped within 10 days

SOHC International 30/40 Driveside Mainshaft Outer Oil Spacing Ring - Each

Product no.: 0663 A11/33

- This is the Bearing Spacerthat fits between the two driveside main bearings on SOHC International 30/40 (and CS1/CJ))  crankcases

£26.00 *
In stock
can be shipped within 10 days

SOHC International 30/40 Driveside Mainshaft Inner Bearing Spacer - Each

Product no.: 0664 A11/835

- This is the inner bearing spacer that fits between the two driveside main bearings on International 30/40 and CS1/CSJ aluminium-crankcases engines 

£13.00 *
In stock
can be shipped within 10 days

Norton SOHC/OHV/SV - Crankcase One Way Valve Breather Pipe - For Inter With Chaincases

Product no.: 0681 A11/476

Crankcase drive side breather pipe that fits on one way valve on SOHC road going International models with Norton oilbath chaincease fitted, includes lockwire for fitting black oil pipe, (if required)  

£10.00 *
In stock

Norton SOHC - International Oil Tank Top Breather Pipe

Product no.: 0682 A11/298

Norton International oil tank top breather pipe.  This pipe was original fitment on the top of half wrapround International oil tanks, feeding the breather pipe over the frame saddle tube. Includes lockwire for fitting black oil pipe (if required).

£12.50 *
In stock

7/16" Stainless Steel Spring Washer (Alternative Reduced O/D Engine Bolt Washer) : Bag of 10

Product no.: 0695 SW005

7/16" Stainless Steel Engine Bolt Spring Washers.  Alternative to item 0661 - Reduced Outer Diameter plain washers.  Used on Norton 7/16" Engine Bolts with reduced hex heads as used on SOHC engines: Price is for bag of 10

£4.20 *
In stock

OHV/SV Pre 1938 Magneto Chain + Soft Link: 1930's OHV/SV Models (42 Link)

Product no.: 0802 3709

Genuine Renolds magneto chain and one soft link, to fit 1930's (up to 1938) OHV and SV (Mod 18, ES2, 19, 16H, Big4 etc) with 42 links. Note, these chains should use a riveted (soft link), not a circlip link. 

£34.00 *
In stock

Post-War (Pre-Featherbed) Rear Wheel Type Speedometer Cable - 4 Ft 6 Inch Length (Each)

Product no.: 1049 B2/552

This item is for a 4ft 6 inch (i.e. 54") length (Chronometric) Speedometer Cable - of the type fitted to Post-War roadgoing models of rigid, plunger and swinging arm chassis type, where the speedo drive was fitted to the rear wheel and speedo was fitted in a central binnacle on the Norton Roadholder telescopic forks.  Good quality UK sourced cables.

£26.00 *
In stock

Crankshaft Timing Disc Tool - Plastic Type (Each)

Product no.: 1078 TDisc1

- This is a very useful tool, that no workshop should be without - a plastic circular valve/ignition disc, with hole that can be opened out to suit all Norton singles.  Price is Each

£6.00 *
In stock
*
Recommended Retail Price, plus delivery
91 - 100 of 100 results