1.b Norton SOHC, OHV and Side Valve Bearings

Display per page
Sort by
31 - 52 of 52 results

Norton Clutch - Rear Roller Set (Set of 15)

Product no.: 0258 A2/383

These are the rollers that fit in the cage at the rear of the inner clutch body - there are 15 rollers fitted but we include a spare in case you drop one!, so 15+1=16 rollers.

 

£6.50 *

All Norton Pre-Featherbed Models - Head Race Bearing - Ball Sets

Product no.: 0217 A2/521

- Full set of headrace balls - both top and bottom race - to fit all Norton single frames - 34 balls in all (the correct amount for top and bottom races), plus one spare in case you drop one!, 34 + 1 = 35.

£15.00 *

BTH KD1 Magneto - Armature Bearing

Product no.: 0249 KD1001

- Single row ball bearing to fit BTH KD1 competition magnetos (as fitted to Norton camshaft engines). I believe this bearing also fits other similar BTH single cylinder magneto's, i.e. standard KD1 and MH1 models

£19.00 *
In stock

Norton Single Models: Single Row Wheel Bearing

Product no.: 0309 A2/435
Single row ball bearing used on all Single Cylinder models (pre-full width hubs) on the plain hub side front hub and also on the brake side for pre-featherbed conical (SOHC Manx) front brakes. They are also used on all rigid\plunger\non-conical rear hubs on the non brake drum side. As always, this bearing is a high quality named brand bearing (i.e. not a chinese bearing!)
£22.00 *
In stock

Norton Single Models: Twin Row Wheel Bearing

Product no.: 0310 A2/436
Twin row ball bearing used on all Single Cylinder models (pre-full width hubs) on the brake hub side of single sided front hubs (although strangely not used on SOHC conical front hubs. They are also used on all rigid\plunger hubs on the brake drum side. As always, this bearing is a high quality named brand bearing - NSK (i.e. not a chinese bearing!). This twin row bearing was always much more expensive than the single row fitted to the other side, and is now getting quite difficult to find - but as at the end of 2012 I have managed to get another batch!
£41.00 *
In stock

Wheel Bearing - Norton Conical Rear Hub (non drive side) - Single Ball Bearing : (Limited quantity)

Product no.: 0740 A11M//435B

- Single row ball bearing.from top quality RHP brand. As fitted to magnesium conical rear hubs on 1950 Gardengate and later DOHC Featherbed Manx Nortons.  Special order - see detail listing

 

 

£70.00 *
In stock

Wheel Bearing - Norton Conical Rear Hub (drive side) - Single Roller Bearing : (Limited quantity)

Product no.: 0741 A11M//436R

- Single row roller bearing.from top quality RHP brand. As fitted to magnesium conical rear hubs on 1950 Gardengate and later DOHC Featherbed Manx Nortons.  Special order - see detail listing

 

 

£88.00 *
In stock

Norton Wheel Bearing - Felt Washer: 1930's - 1950's Type

Product no.: 0311 A2/437

Proper felt wheel bearing washers, as was original fitment on both sides of all Norton rigid,plunger and swinging arm hubs from the early 1930's through to the 1960's (except conical brake side for some reason).  UK manufactured

£2.40 *
In stock

Norton Wheel Bearing - Felt Steel Cup

Product no.: 0312 A2/439

This is the distinctive steel cup, which is pressed into the end of both front and rear Norton hubs on the brake side, and retains the felt washer, to stop grease escaping into the brake drum. This version is identical to the original Norton version (one of which was used as the template for these), and is useful, as originals often get bent and distorted as part of fitting new wheel bearings

£6.00 *
In stock

New Norton Wheel Hub Bearing - Locking Ring (Non Brake Side) - All Models (Each)

Product no.: 1038 A2/440

This steel fine-threaded ring with 4 distinctive holes (to allow the ring to be rotated and locked) was fitted to the none-brake side of Norton hubs on all models from the 1930's through to the late 1950's, to retain the wheel bearing.  It is normal when trying to remove an original ring, to find that the small holes have been badly chewed, because a punch has been used to lock them in the past, so finding good ones is now difficult.  These rings are CNC machined, an original Norton ring having been used as the pattern.  See detail listing for more information.  Price is each.  

£18.00 *
In stock

Norton Wheel Bearing Felt Washer - Later Metric Bearings or SOHC Crank (see description)

Product no.: 0914 A2/437M

Proper felt bearing washer - As fitted to later (35mm) Norton wheel bearings or can also be used on SOHC crank behind sprocket, on open chaincase competition models - see description for more information 

£2.20 *
In stock

Small/Straight 'Norton Type' Grease Nipple and Red Fibre Washer: (Each)

Product no.: 0373 A2/500

Imperial thread grease nipple of type similar to that originally fitted to Norton frame headstock races, Norton Gardengate rear plunger alloy sliders, and Norton brake pedals, with correct style and finish.  Also comes with correct size red fibres washer. This listing for a single nipple and washer

£1.60 *
In stock

Small/Straight 'Norton Type' Grease Nipple and Red Fibre Washer: (Pack of 6)

Product no.: 0373b A2/500

Imperial thread grease nipple of type similar to that originally fitted to Norton frame headstock races, Norton Gardengate rear plunger alloy sliders, and Norton brake pedals, with correct style and finish.  Also comes with correct size red fibre washer. This listing is for a pack of 6 grease nipples and red fibre washers

£9.00 *
In stock

Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Each)

Product no.: 0374 A2/198

Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access.  Also comes with correct size red fibre washer. This listing is for a single grease nipples and red fibre washer

£2.15 *
In stock

Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Pack of 6)

Product no.: 0374b A2/198

Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access.  Also comes with correct size red fibre washer.  This listing is for a pack of 6 grease nipples and red fibre washers (slightly cheaper than when bought individually)

£12.00 *
In stock

Felt Wool Gasket/Seal Material - Complete Kit of 1mm/2mm/3mm/6mm Felt + White Marker Pen

Product no.: 0838 Felt11

This Felt seal making kit consists of a variety of the thickness of 100% Black Wool Felt offered in the other listings + a white (PAINT) marker pen which is ideal for the purpose of marking out the washer/seal to be made before cutting.  See detail listing for kit contents

£29.00 *
Not in stock

Felt Wool Gasket/Seal Material - 1mm Black Wool - 440mm x 250xmm Sheet

Product no.: 0832 Felt05

1mm thick, 100% Wool Black Felt sheet - Med 440mm x 250mm size.  This is 1mm (thin) pure wool felt material - very useful for wrapping around cambox area, lower primary chain rungs or undercovering under saddles and seats.  It can also be used for thin felt washers.  Price per sheet 

£4.50 *
In stock

Felt Wool Gasket/Seal Material - 2mm Black Wool - 310mm x 250xmm Sheet

Product no.: 0834 Felt06

2mm thick, 100% Wool Black Felt sheet - 310mm x 250mm size.  This is 2mm (medium thickness) pure wool felt material - very useful for slim felt washers, or absorbent material for wrapping around cambox area, lower primary chain rungs or undercovering under seats and saddles.  Price per sheet 

£5.50 *
In stock

Felt Wool Gasket/Seal Material - 3mm Black Wool - 310mm x 250xmm Sheet

Product no.: 0835 Felt08

3mm thick, 100% Wool Black Felt sheet - 310mm x 250mm size.  This is 3mm (thicker variety) pure wool felt material - very useful for making felt washers and seals of the type often covering wheel bearings or around primary chaincases, or other areas where you want to stop seeping of oil and grease.  This material allows you to cut washers and seals to the size you require.  Price per sheet 

£7.50 *
Not in stock

Felt Wool Gasket/Seal Material - 3mm Black Wool - 100mm x 80xmm Patch

Product no.: 0836 Felt09

3mm thick, 100% Wool Black Felt sheet - 180mm x 80mm size.  This is 3mm (thicker variety) pure wool felt material - very useful for making felt washers and seals of the type often covering wheel bearings or around primary chaincases, or other areas where you want to stop seeping of oil and grease.  This is a smaller section of material - useful if you only have a a few washers to make.  Price is per patch

£1.80 *
In stock

Felt Wool Gasket/Seal Material - 6mm Black Wool - 100mm x 80xmm Patch

Product no.: 0837 Felt10

6mm thick, 100% Wool Black Felt sheet - 180mm x 80mm size.  This is a non-standard thickness felt that we have to make using two 3mm felt patch's together (see full item description for details).  I use this very thick variety of felt for special purposes - the most obvious one being providing protection to steering head bearings or swinging arm bearing areas. Price is per patch

£4.50 *
In stock

Felt Wool Gasket/Seal Material - 1mm Black Wool - 510mm x 410xmm Sheet

Product no.: 0831 Felt04

1mm thick, 100% Wool Black Felt sheet - large 510mm x 410mm size.  This is 1mm (thin) pure wool felt material - very useful for wrapping around cambox area, lower primary chain rungs or undercovering under saddles and seats.  It can also be used for thin felt washers.  Price per sheet 

£8.50 *
In stock
*
Recommended Retail Price, plus delivery
31 - 52 of 52 results

1.b Norton SOHC, OHV and Side Valve Bearings
Norton SOHC - HIgh Quality Engine and Gearbox Bearings