Your basket is empty.
Categories Items - Full Catalog 1.j Norton Gearbox and Clutch Parts
1.j Norton Gearbox and Clutch Parts
Parts to fit those gearbox/clutch's fitted to all single cylinder Norton models - particularly upright type gearbox
Norton Primary Chaincase : Inspection Cover in Stainless SteelProduct no.: 0378 A2/487Inspection Cover that fits on Norton Primary Chaincase/Oilbath - fits all models. Manufacttured by us in Stainless Stell and very pretty!
|
Norton Oilbath Chaincase Inspection Cover - Cork Oil WasherProduct no.: 0379 A2/488Cork washer that fits behind hte Chaincase inspection Cover (our Item no 0378). Prevents oil weep down side of chaincase! |
3/32 x 1" Split Pin - Pack of 10Product no.: 0425 Split 1
Pack of 10 3/32 x 1" split pins - these fit the special Norton clevis pins we manufacture for Norton forks
£2.40
*
|
Norton SOHC (and OHV/SV) - Renolds Primary Chain and Split LinkProduct no.: 0448 A11/477This is a high quality Renolds primary chain, and Renolds split link to fit a Norton SOHC engine, with standard Norton clutch basket diameter (i.e. either International or Manx). Note: standard SOHC International/Manx primary chains are listed as 76 Links in the 1948 Norton spares catalog. Our chains are 78 links (including the split link), so you can fit the chain as is, or remove a link if a smaller sprocket is used. Will also fit OHV and SV single cylinder models |
Norton - Renolds Primary Chain Spare Split LinkProduct no.: 0449 A11/477bSpare Renolds split link for Norton Primary Chain: (ignore number on the bag . . . I got it wrong . .. it is 449!) |
Norton - Renolds Primary Chain Half LinkProduct no.: 0450 A11/477c
Renolds half link for Norton Primary Chain. First and foremost, I would say it is not considered good practice to fit half (or one and a half) links to primary chains. However, if you find that fitting a different toothed sprocket leaves you with a difficult range of adjustment, then this half link may be used - at least until normal chain stretch allows for it to be removed. Note: these are half links . . . which are quite unusual. It is more usual to fit a 'link and a half' which we also sell seperately. However, these are available if a link and half will result in too long a chain.
£4.20
*
|
Norton - Renolds Primary Chain 1.5 LinkProduct no.: 0451 A11/477d
1.5 Link for Norton Primary Chain. First and foremost, I would say it is not considered good practice to fit half (or one and a half) links to primary chains. However, if you find that fitting a different toothed sprocket leaves you with a difficult range of adjustment, then this half link may be used - at least until normal chain stretch allows for it to be removed. Note: these are half links . . . which are quite unusual.
£7.40
*
|
Norton SOHC/OHV - Renolds Racing Quality Primary Chain and Split Link (Synergy)Product no.: 0886 A11/477RThis is best quality Renolds primary chain (similar spec to the old GP type - now called Renolds Synergy), and Renolds Synergy split link to fit a Norton SOHC engine, with standard Norton clutch basket diameter (i.e. either International or Manx). Note: standard SOHC International/Manx primary chains are listed as 76 Links in the 1948 Norton spares catalog. Our chains are 78 links (including the split link), so you can fit the chain to be sure - in case using a larger than standard engine sprocket. |
Norton SOHC - Renolds Racing Quality Chain - Spare Split Link (Synergy)Product no.: 0887 A11/477b-RThis is best quality Renolds Synergy Spare Split Link, to go with our Racing quality primary chain (item 0886). Price is per split link |
Norton - Renolds Racing Quality Primary Chain - Spare Split Link and a Half (1.5 link)Product no.: 0887b A11/477b-SThis is best quality Renolds Synergy Spare Split Link + one half (i.e. 1.5 links), to go with our Racing quality primary chain (item 0886). Price is per split link. See listing detail for more information |
Norton Gearbox Pointer or Chaincase Attachment Bolt Pan Washers (Stainless steel) - PairProduct no.: 0464 A2/275Stainless Steel pan washers of the same size as those used on the Upright gearbox pointer bolt or rear of Norton chaincases where they attach to the rear engine plate mount stud (help stop chaincase from splitting). Stainless Steel. Price is for a pair |
SOHC Pre-Featherbed Engine Sprocket - 17T to 23T AvailableProduct no.: 0650 A11/473- SOHC Engine Sprocket (all models) for Pre-Featherbed models. Various teeth available from 17T to 23T |
SOHC Featherbed Engine Sprocket - 17T to 22T AvailableProduct no.: 0651 A11/473- SOHC Engine Sprocket (all models including early DOHC Long Stroke Manx Type) for Featherbed models. Various teeth available from 18T to 22T |
| 91 - 103 of 103 results |
|
