1.g Norton ES2/16H/OHV/SV Parts

Proper felt bearing washer - As fitted to later (35mm) Norton wheel bearings or can also be used on SOHC crank behind sprocket, on open chaincase competition models - see description for more information 

These are the fine thread screws that fit the Lucas Magdyno triangular front cover in place, as used on most Norton roadgoing singles from the 1930's through to the late 1950's.  Nice shallow curve to the front of the screws, as per the originals. Price is for pack of 4

This is a nice quality reproduction of the spring type clip, used to retain the chromed pressed steel points cover on Lucas Magdyno units, as used on most Norton roadgoing singles from the 1930's through to the late 1950's.  See detail listing for dimensions.  Price is Each

- This is a very useful tool, that no workshop should be without - a plastic circular valve/ignition disc, with hole that can be opened out to suit all Norton singles.  Price is Each

These Red Fibre Washers are a smaller diameter than 'normal' 1/4" BSP washers - but then pre-threaded by us - so they are a good fit on those Norton fittings that used 1/4" BSP thread, but have a groove behind the thread - e.g. Norton pre-48 Oil Sump Plugs and some breather union fittings.  See detail listing for more information.  This listing is for a pair washers

These Red Fibre Washers are a nice close fit on 1/4" BSP threads and are useful for many Norton fittings - such as those breather unions and petrol taps that have a 1/4" BSP thread that comes up close to the hex or shoulder. Unlike many BSP fibre washers available these days - these ones are a good fit to the thread.  See listing for more information. Price is per pair

These circular kneepads are circular with a central single fixing screw (if required, the hole is actually blind as supplied) - and of a generic style often fitted to 1920's flat tank models and early 1930's - but also the Norton range of 1929 also fitted circular kneepads.  See listing for more detail.  Price is per pair

This listing is for an in-line wiring harness fuse kit - which has a holder to fit modern 'Mini' type motorcycle fuses.  The kit consists of 10 parts so it can be easily fitted in line with your current wiring harness and battery, to provide a Master Fuse if your current (British bike) harness does not already have one.  The kit comes supplied with one fuse - select amperage required.  See Listing for more detail 

This listing is for 'New Old Stock' 3/8" x 7/32" pitch chain - as fitted to Norton Dominator camshaft chains, and many other British bike models.  It is of JWIS (German) hiqh quality brand - and has been in storage for at least 20 years.  See listing for more detail.  Sold By The Foot (12 inches)

- This is a reasonable copy of the battery carrier that was fitted to OHV and Side-Valve rigid and plunger framed models, that fitted the Exide, rectangular style upright 6v battery.  Slightly improved by us from other similar items you may see advertised - see listing for more detail.  Price is each

Crankcase feed pipe to from SOHC crankcase to cambox and 1/4" BSP union nut's to fit all SOHC models (30/40, M30/M40 etc) - this is the bottom piece of the cambox feed pipe assembly - which we offer here to be purchased seperately.  Bent as per original (to avoid fouling barrel) in satin plated copper pipe.  Also - a suitable replacement for OHV/SV oil tank breather pipe - Part no: A2/198, see listing.  Price is per pipe and BSP nut.