3b. Electrical Lighting, Electrical System and Other Electrical Related Parts

3b. Electrical Lighting, Electrical System and Other Electrical Related Parts

 

This section includes many electrical items of the type fitted to Norton roadgoing models from the 1930's to the 1950's.  This includes a variety of headlamp units, tail lights, electrical wiring harneses and other electrical fittings and related parts for your restoration


Display per page
Sort by
31 - 60 of 75 results

Reproduction Lucas E3(LM) Dynamo Bakelite Cover (1937 - @1953 models) - Offset Screw: Each

Product no.: 0616 LUC014

Reproduction of the black bakelite cover fitted to Lucas Magdyno Dynalmo's of the E3LM type that were original fitment on most Norton roadgoing models from approximately 1937 - to the early 1950's. See listing for more detail.   Price is Each

£14.50 *

In stock

Reproduction Lucas E3H Dynamo Bakelite Cover - Centralised Screw: Each

Product no.: 1221 LU200354

Reproduction of the black bakelite cover fitted to Lucas Magdyno Dynalmo's of the E3H type - which are identifiable by having a centralised mounting screw hole (see photo). See listing for more detail.   Price is Each

£14.50 *

In stock

Lucas M01L (Mag/Dyno) - E3/E3L Dynamo Brushes - Pair

Product no.: 1211 200290

- These are the rectangular brushes fitted to the Lucas E3 and E3L Dynamo unit that sits atop the Lucas Magdyno unit, fitted to most Norton Single Cylinder roadgoing models.  These brushes are to fit the E3(L) 2 brush type dynamo, fitted to Norton models from 1937 onwards.  See detail listing for more information. Price is Per Pair

£22.00 *

In stock

Lucas Mag/Dyno Dynamo - Rubber Wiring Input Shroud (Each)

Product no.: 0428 LUC008

This is the distinctive rubber shroud that fits over the input wires on the pre-war and immediate post-war Lucas Dynamo - where those dynamos were fitted with a flat bakelite cover - see photos for details.  Price is Each

£4.80 *

In stock

Slotted Screw Securing Lucas Dynamo To Magneto (Magdyno) - Stainless Steel

Product no.: 0454 200569

As the description implies, this is the special slotted nut/screw that was used to secure the Lucas dynamo to the magneto (Lucas Mag/Dyno's) fitted to all Norton road-going models from 1930's to 1950's. This screw is very nicely made and identical to original, but in stainless Steel

£11.00 *

In stock

End Cover Clip to fit Lucas Mag/Dyno (Each)

Product no.: 1026 Lucas32

This is a nice quality reproduction of the spring type clip, used to retain the chromed pressed steel points cover on Lucas Magdyno units, as used on most Norton roadgoing singles from the 1930's through to the late 1950's.  See detail listing for dimensions.  Price is Each

£12.00 *

In stock

Cheesehead Screw Set to fit Lucas Mag/Dyno Front Cover - Pack of 4

Product no.: 1025 Lucas31

These are the fine thread screws that fit the Lucas Magdyno triangular front cover in place, as used on most Norton roadgoing singles from the 1930's through to the late 1950's.  Nice shallow curve to the front of the screws, as per the originals. Price is for pack of 4

£8.00 *

In stock

Magneto Platform Screws for OHV/SV Models - Lucas Mag/Dyno Type - Pack of 4

Product no.: 0712 E3831

These are the coarse thread countersunk screws that are used to secure the Lucas Mag/Dyno to the cast aluminium platform used on OHV and SV Norton singles.  Price is for pack of 4

£12.00 *

In stock

Norton WD Type Mag/Dyno Platform Casting - Each

Product no.: 1198 3711_WD

This is a nice reporduction of the Norton Magdyno (iron) platform, that was fitted to some Norton 16H WD models - but should also fit other pre-1948 SV and OHV models.  See listing for more information before ordering. Price is Each

£29.00 *

In stock

Lucas Mag/Dyno Type LU463109 Fibre Gear: 58 Tooth - Each

Product no.: 1184 Lucas42

This is the red fibre gear that was fitted to the magneto component of Lucas Mag/Dyno Units and was original Lucas Part Number LU463109 or 463109.  This gear is 58 tooth.  Price is Each

£22.00 *

In stock

Lucas Mag/Dyno Top Dynamo Strap and Bolts - Each

Product no.: 1185 Lucas43

This is the steel strap (black painted) that secured the dynamo to the magneto on Lucas Mag/Dyno units.  This is a nice quality reproduction and includes the original type hex securing screws (with screwdriver slot), which are plated steel, as well as the round pieces the bolts feed through.  Price is per assembly

£14.00 *

In stock

Genuine Lucas - Magneto Pickup Hex Screws to Fit K2F Type Magnetos - Pair

Product no.: 1192 Lucas47

This listing is for a pair of hex (with screwdriver slot as well) Pickup Screws to fit Lucas K2F (twin cylinder) magnetos (as commonly fitted to many Norton twins, but should also fit KVF Vincent magnetos) - these screws being cadmium plated steel from the genuine Lucas authentic classic range.  See listing detail for screwlength. Price is for a pair of screws

£4.50 *

In stock

Genuine Lucas - Magneto Cable Plunger OEM 454969 - Each

Product no.: 1193 454969

This listing is for the cable plunger commonly fitted to manual advance/retard Lucas magnetos - and is described as Original Part Number 454969.  This should fit M01 MagDyno magnetos commonly fitted to Norton single road models, as well as many twin cylinder magnetos.  Price is Each

£8.50 *

In stock

Advance/Retard Cable and Bottom Magneto Piece - to Fit Lucas Type MagDyno or Magneto -: Each

Product no.: 1266 A2/256

This listing is for a cable and cable abutment cylinder to fit Lucas type manual advance/retard MagDyno units and manual advance/retard magnetos.  The assembly consists of the cable, screw in abutment to the magneto and abutment rubber cover.  See listing for more detail.  Price is Each (i.e. assembly as per photo).

£16.00 *

In stock

Genuine Lucas - Lucas Road Type Magneto Label (Model not stamped): Anti-Clockwise - Each

Product no.: 1194 Lucas48

This listing is for a genuine Lucas (from their Classic Range) - Magneto Model/Serial Number Aluminium Label.  This type is black and of the type used on most Lucas roadgoing models - and has an Anti-Clockwise Arrow direction indicator.  Note:  model type not stamped on this label.  See listing for more detail.  Price is Each

£9.00 *

In stock

Genuine Lucas - Lucas Road Type Magneto Label (Model not stamped): Clockwise - Each

Product no.: 1195 Lucas49

This listing is for a genuine Lucas (from their Classic Range) - Magneto Model/Serial Number Aluminium Label.  This type is black and of the type used on most Lucas roadgoing models - and has a Clockwise Arrow direction indicator.  Note:  model type not stamped on this label.  See listing for more detail.  Price is Each

£9.00 *

In stock

Genuine Lucas - Lucas K2FC Red Competition Type Magneto Label - Each

Product no.: 1196 Lucas50

This listing is for a genuine Lucas (from their Classic Range) - Magneto Model/Serial Number Aluminium Label.  This type is red and is stamped in the model type 'K2FC' - which was the competition type fitted to many sports and racing parallel twins.  See listing for more detail.  Price is Each

£9.00 *

In stock

BTH KD1 (and Lucas Manual Magnetos) - Advance/Retard Cable Abutment - Rubber Shroud (Each)

Product no.: 0372 KD1 027
Rubber cable shroud to stop water running down the advance\retard cable and into the mechanism. This shroud is of the type fitted to BTH KD1 magnetos, but is also very similar to the Lucas variety as well (and can be used on both)

£3.30 *

In stock

Genuine Lucas K2FC/FR (and other Lucas NR1 Comp mags?) Competition Magneto End Cap - Each

Product no.: 1189 Lucas44

This endcap is from the genuine Lucas authentic classic range - and is the screw on aluminium end cap (with cutout pickup), as fitted to original Lucas K2FC/FR (and some single cylinder competition magneto's).  As you would expect from the genuine Lucas range - these end caps look beautifully manufactured and are constructed as the original items were - see listing for more detail.  Price is per assembly

£63.00 *

In stock

Genuine Lucas K2F (and other Single cylinder Mags?) Magneto End Cap - Each

Product no.: 1190 Lucas45

This endcap is from the genuine Lucas authentic classic range - and is the screw on aluminium end cap with black centre type (with cutout pickup), as fitted to original Lucas K2F magneto's - but was also found fitted to some single cylinder mags.  As you would expect from the genuine Lucas range - these end caps look beautifully manufactured and are constructed as the original items were - see listing for more detail.  Price is per assembly

£43.00 *

In stock

Genuine Lucas - Magneto Pickup Hex Screws to Fit M01 (MagDyno) Type Magnetos - Pair

Product no.: 1191 Lucas46

This listing is for a pair of hex (with screwdriver slot as well) Pickup Screws to fit Lucas M01 Magdyno magnetos (as commonly fitted to many Norton road going single cylinder models - these screws being cadmium plated steel from the genuine Lucas authentic classic range.  See listing detail for screwlength. Price is for a pair of screws

£4.50 *

In stock

Genuine Lucas Ignition Condenser 423871 - Late Norton ES2/Mod50 Alternator Models : Each

Product no.: 1274 423871

This condenser is from the genuine Lucas Classic range, being their 423871 type - and was fitted to late Norton Model ES2 and Model 50 alternator models.  It was also fitted to pre 1964 AMC singles and many Triumph, Arial, Royal Enfield and BSA models. See listing for more detail. Price is Each

£9.00 *

In stock

Replica Lucas Distributor Condenser 54410823 - Late Norton ES2/Mod50 Distr Models : Each

Product no.: 1275 54410823

This condenser is a UK sourced item of the 54410823 type - and was fitted to late Norton Model ES2/Model 50 and Dominator Distributor models.  It was also fitted to pre Triumph 3TA/5TA models from 1957/63 and BSA B31 Distributor models. See listing for more detail. Price is Each

£10.50 *

In stock

Altette 6v HF1234 Horn by - Genuine Lucas

Product no.: 0471 HF1234

High quality genuine Lucas version of the famous Altette Model HF1234 6 volt horn - manufactured by Lucas (the original company that made electrical components for Norton, as fitted to all Norton roadgoing singles from the 1930's through to the 1950's. 

£147.00 *

In stock

Altette Horn Mounting Bracket

Product no.: 0472 HF1234MB

Mounting bracket for mounting Lucas Altette horn on the chassis. Nice quality item with correct diamond shape reinforcing plate at mount point.  Black enamelled, price is Each

 

£14.00 *

In stock

Lucas 31482A Dip Switch (Diamond type)

Product no.: 0473 31482A

Good quality reproduction of the Lucas 31482A type dip switch, as was original fitment on all Norton singles (including SOHC International) from mid 1930's to late 1940's, with correct diamond shape switch (not round)

£26.30 *

In stock

Lucas LU6204 7/8" Horn Button

Product no.: 0474 LU76204
Good quality reproduction of the Lucas LU6204 type chromed horn button, to fit 7/8" diameter handlebars, as was original fitment on Norton singles (including SOHC International) from 1930's - 1950's.

£13.00 *

In stock

Lucas LU6204 1" Horn Button

Product no.: 0475 LU76204A
Good quality reproduction of the Lucas LU6204A type chromed horn button. The same as item 0473 except this one is to fit earlier 1" diameter handlebars, as was original fitment on Norton singles (including SOHC International) in the mid 1930's

£13.00 *

In stock

Red Button Type - Handlebar Magneto Cutout Button - 7/8" Handlebar Size - Each

Product no.: 1214 Cutout01

Pretty Button type kill switch - with Red centre button, ideal for using as a magneto kill switch, or also as a horn switch if required.  Fits 7/8" handlebars.  Price is Each

£9.00 *

In stock
can be shipped within 10 days

Red Button Type - Handlebar Horn or Magneto Cutout Button - 1" Handlebar Size - Each

Product no.: 1215 Cutout02

This 'Red Button' type horn or magneto kill switch - is from the same manufacturer as our 7/8" handlebar version - except we then manufacturer a custom long length and head shape stainless steel screw, to allow the switch to be fitted to pre-war type 1" handlebars.  See listing for more detail. Price is Each

£15.00 *

In stock
can be shipped within 10 days
*
Recommended Retail Price, plus delivery
31 - 60 of 75 results