1.l Norton Fasteners (mostly SS) - Bolts, Cheesehead Screws, Washers, Screws etc to fit Norton Single Models

1.l Norton Fasteners (mostly SS) - Bolts, Cheesehead Screws, Washers, Screws etc to fit Norton Single Models

A selection of fasteners to fit Norton single cylinder motorcycles (mostly Stainlesss Steel) - including Cheesehead screw sets, chassis bolts, fasteners particular to Norton single models and also good quality generic stainless nuts, bolts and washer packs in Imperial sizes.  Many of our special Norton single fasteners are CNC'd in house from high quality stainless, faithfully replicating original patterns from the 1920's-60's.  


Display per page
Sort by
31 - 60 of 90 results

Norton Rear Wheel Spindle Washer (Dull Nickel Plated) - Pair

Product no.: 0462 B2/659

We have these lasercut and then dull nickel plated washers with wide face for spreading load on Norton rear wheel spindles. These were originally fitted to Norton single rear wheels but are nearly always missing when restoring a bike (not available commercially, which is why we made them). Price is for a pair of washers

£4.40 *
In stock

Norton All Singles (SOHC/OHV/SV) : Front Engine Bolt (i.e. Frame Downtube) Washers - Pair:

Product no.: 0463 11809

Lasercut and then dull nickel plated washers to fit the 0.5" front engine bolt (i.e. the bolt that secures the front engine plates to the frame down tube). Normal 0.5" commercially available washers are too wide, these are much closer to the original washers. Price is for a pair of washers

£3.40 *
In stock

Norton Gearbox Pointer or Chaincase Attachment Bolt Pan Washers (Stainless steel) - Pair

Product no.: 0464 A2/275

Stainless Steel pan washers of the same size as those used on the Upright gearbox pointer bolt or rear of Norton chaincases where they attach to the rear engine plate mount stud (help stop chaincase from splitting). Stainless Steel. Price is for a pair

£2.40 *
In stock

Norton Gardengate Frame - Plunger Spindle Alloy Top Plugs - Pair

Product no.: 1039 B4/673-PR

This item is for a pair of the correct shape and profile, alloy plugs that were fitted into the top of the rear Plunger spindles that were fitted to all Norton Gardengate frames - from 1939 to the early 1950's.  Original plugs are often badly damaged, broken off or have just come out making the top of the plunger suspension area look messy.  These plugs are CNC manufactured to be lightly tapped into the original spindle holes and will greatly improve the appearance of the rear end, where they sit quite prominently.  The plug heads are lightly linished and polished.  Price is per pair of plugs 

£18.00 *
In stock

Norton Gardengate Frame - Plunger Complete Rear Wheel Adjuster Assemblies - Pair

Product no.: 1042 B4/665-ASS

This item is for a pair of complete rear wheel adjuster assemblies - with all parts patterned as per the original items, to fit Gardengate Plunger Norton Models (singles and twins).  It consists of two fabricated wheel spindle holders (that wrap around the alloy plunger castings), two distinctive square head bolts - of the correct profile, two dished plates, two washers and four adjuster bolts - the locknuts being a smaller spanner sise than the main nuts - all as per the original Norton design.  The fabricated spindle holders are in nickel plated steel, while all the other parts are CNC manufactured in stainless steel.  Price is for two complete assemblies (i.e. enough for one bike).  See Detail listing for more information

£75.00 *
Not in stock

Norton Gardengate Frame - Plunger Rear Chain Adjuster Caps - Stainless Steel (Pair)

Product no.: 1034 B4/668-S

This item is for a pair of the distinctive dished caps that were fitted to the rear of all Norton Gardengate Plunger suspension castings (i..e plunger frames manufactured from 1939 to the early 1950's on all models), and fitted over the alloy castings, allowing for adjustment of the rear chain adjuster.  These items are copied from an original pattern and are CNC manufactured in stainless steel, so will not rust and look very pretty.  Price is for a pair of the caps

£17.00 *
In stock

Norton Gardengate Frame - Plunger Square Type Adjuster Bolts and Nuts (Stainless Steel) - Pair

Product no.: 1043 B4/666-Ass

This item listing is for a pair of the distinctive square headed rear wheel adjustment bolts, adjustment nuts and locknuts, to fit Gardengate Plunger Norton Models. The 'Gardengate' was the plunger type spring frame that Norton adopted for all sprung models from 1939, through to the early 1950's an was offered for OHV and SOHC roadgoing singles, pre-Featherbed (Dominator) twins and the racing model Manx Nortons from 1939-50.  All parts CNC made in stainless steel with correct BSC threads.  See detail isting for more information 

£32.00 *
In stock

Norton Gardengate Frame - Plunger Chain Adjuster Nuts - Stainless Steel (2 large/2 small)

Product no.: 1044 B4/667-4

This item is for 4 of the correct profile and spanner size 5/16"nuts to fit the original Gardengate Plunger rear wheel adjusters, CNC manufactured in stainless steel.  The main adjuster nuts are double chamfered and deeper than commercially available nuts, while the adjuster nuts are 'reduced head', i.e. a smaller spanner size than normal 5/16" nuts, to allow for easier adjustment - both types being replicated from the original Norton nuts.  Price is for 4 nuts. 

£13.00 *
In stock

Norton Gardengate Frame - Plunger Spindle Bottom Bolts/Extra Thick Washers - Stainless Steel (Set 4)

Product no.: 1014 B4/672-S

This item is for a pair of the correct, original Norton pattern, bolts and extra heavy washers that were fitted to the bottom of plunger spindles to Norton Gargengate type (plunger) frames.  The set consists of 2 CNC manufactured bolts, 2 washers in stainless steel and are identical in pattern to originals.  See detail listing for more information 

£24.50 *
In stock

Norton Gardengate Frame - Plunger Spindle Bottom: Extra Thick Washer - Stainless Steel (Pair)

Product no.: 1013 11181

This item is for a pair of the extra thick washers that were fitted under the head of the plunger spindle bolt on Norton Gardengate plunger frames.  They were made extremely thick, so when the bolt was tightened, it would pull the plunger spindle taper into the bottom frame casting without bending.  These are as per the originals in thickness, but in stainless steel so will not rust.  Price is per pair. 

£7.90 *
In stock

Norton Telescopic Fork Leg - Replacement Manx Norton (Conical Hub) Brake Pin (Stainless Steel): Each

Product no.: 1040 E11M/611B

This item is the large diameter threaded brake pin that was screwed into the right hand side alloy fork slider on telescopic fork Manx Norton models, when fitted with the large conical type magnesium Manx Norton brake hub.  These are CNC manufactured in stainless steel - but as can be seen from the photo - are supplied with the actual brake plate pin left in its un-milled state, as the slot for the brake plate should only be milled once the pin is screwed into position in the fork leg.  See detail listing for more information

£20.00 *
In stock

Small/Straight 'Norton Type' Grease Nipple and Red Fibre Washer: (Each)

Product no.: 0373 A2/500

Imperial thread grease nipple of type similar to that originally fitted to Norton frame headstock races, Norton Gardengate rear plunger alloy sliders, and Norton brake pedals, with correct style and finish.  Also comes with correct size red fibres washer. This listing for a single nipple and washer

£2.50 *
In stock

Small/Straight 'Norton Type' Grease Nipple and Red Fibre Washer: (Pack of 6)

Product no.: 0373b A2/500

Imperial thread grease nipple of type similar to that originally fitted to Norton frame headstock races, Norton Gardengate rear plunger alloy sliders, and Norton brake pedals, with correct style and finish.  Also comes with correct size red fibre washer. This listing is for a pack of 6 grease nipples and red fibre washers

£14.00 *
In stock

Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Each)

Product no.: 0374 A2/198

Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access.  Also comes with correct size red fibre washer. This listing is for a single grease nipples and red fibre washer

£2.90 *
In stock

Norton Type Angled Grease Nipple and Red Fibre Washer - i.e. Wheels and Girder Forks: (Pack of 6)

Product no.: 0374b A2/198

Imperial thread angled grease nipple of type with angle/finish similar to that originally fitted to Norton wheel hubs, girder fork blades and other areas where the small straight grease nipple did not give easy access.  Also comes with correct size red fibre washer.  This listing is for a pack of 6 grease nipples and red fibre washers (slightly cheaper than when bought individually)

£16.00 *
In stock

Norton Long Roadholder - Drain Plugs and Washers (Stainless Steel): Pair

Product no.: 1093 B2/612

These are the drain plugs fitted into the base of the alloy Long type Roadholder telescopic fork legs, which allow the fork oil to be drained.  These items are CNC machined in stainless steel to the original thread size and tolerance, with a nice quality head and milled slot in stainless steel.  Each pair comes with 4 of our high quality red fibre washers - 2 per screw.  Price is for a pair.  See Item Description for more thread information

 

£8.90 *
In stock

Fasteners - 3. Stainless Steel Imperial Nuts and Bolt Sets

Product no.: Fasteners 3

Part 3 of the Fasteners Section lists:

 

Stainless Steel Nuts and Bolt Sets

 

 

-

£0.00 *

2BA x 1.00" Round Headed Screws - Stainless Steel: Pack of 4

Product no.: 1176 2BA_1.00

Pack of 4 x 1.00" long (overall length) x 2 BA Cheeseheaded screws in stainless steel. The threaded length is 0.875". Nice quality bolts. Ideal for applications such as controls, electrical fittings, small brackets etc.  Price is for pack of 4 screws, in stainless steel

£5.00 *
In stock

1/4" x 5/8" BSC Bolt and Nut - Stainless Steel: Pack of 4

Product no.: 0479b 025058BTNTSS

Pack of 4 x 5/8"" long x 1/4" BSC bolts (with plain heads - no writing on them) and nuts in stainless steel. Nice quality bolts. Ideal for applications such as attaching mudguards, stays, exhaust brackets, chainguards etc.  Price is for 4 bolts and 4 nuts, in stainless steel

£11.00 *
Not in stock

1/4" x 7/8"" BSC Bolt With (Norton Type) Domed Head/Nut/Pan+Std Washer - Stainless Steel: Pack of 4

Product no.: 1098 02500875SS

Pack of 4: 7/8" long x 1/4" Stainless Steel BSC bolts (with plain heads - no writing on them), and these bolts have the special 'Norton type' curved head, popular for various fastenings on Norton single models 1930's/50.s. These come with nuts fitted and one pan washer and one normal washer per bolt - all in stainless steel.  Ideal for mudguards and attaching racing number plates and upholstery etc.  Price is for a pack of four.  Manufactured in UK and nice quality

£12.00 *
Still in stock

1/4" x 7/8" BSC Bolt and Nut - Stainless Steel: Pack of 4

Product no.: 0482 0250BTNYSS2

Pack of 4: 7/8" long x 1/4" BSC bolts (with plain heads - no writing on them) and nuts in stainless steel. British made, nice quality

£12.00 *
Not in stock

1/4" x 1" BSC Bolt and Nut (Plain Head) - Stainless Steel: Pack of 4

Product no.: 0480 0250BTNTSS

Pack of 4: 1" long x 1/4" BSC bolts (with plain heads - no writing on them) and good quality nuts in stainless steel. Each bolt fitted wtih 2 stainless steel washers

Currently out of stock.

£14.00 *

1/4" x 1.5" BSC Bolt and Full Nut - Stainless Steel: Pack of 4

Product no.: 0481 0250BTNYSS[1]

Pack of 4: 1.5" long x 1/4" BSC bolts (with plain heads - no writing on them) and full machined nuts (not cheaper mass made nutes) in stainless steel. British made, nice quality

£13.50 *
In stock

1/4" x 1.5" BSC Bolt and 2 Nuts (i.e. locknut) - Stainless Steel: Pack of 4

Product no.: 0481B 0250B1.5NN

Pack of 4: 1.5" long x 1/4" BSC bolts (with plain heads - no writing on them) and full machined nuts (not cheaper mass made nutes) in stainless steel. British made, nice quality

£13.00 *
In stock

1/4" x 1.5" BSC Bolt (only) - Stainless Steel: Pack of 4

Product no.: 0481C 0250B1.5

Pack of 4: 1.5" long x 1/4" BSC bolts (with plain heads - no writing on them) and full machined nuts (not cheaper mass made nutes) in stainless steel. British made, nice quality

£9.00 *
In stock

1/4" x 2.0" BSC Bolt With (Norton Type) Domed Head and Full Nut - Stainless Steel: Pack of 2

Product no.: 1097 0250200SS

Pack of 2: 2.0" long x 1/4" Stainless Steel BSC bolts (with plain heads - no writing on them), and these bolts have the special 'Norton type' curved head, popular for various fastenings on Norton single models 1930's/50.s. With full machined nuts and two washers per bolt.  Price is per pair.  Manufactured in UK and nice quality

£6.50 *
In stock

5/16" x 5/8" BSC Bolt and Nut - Stainless Steel: Pack of 4

Product no.: 0487 0316058BTNTSS
£13.50 *
Not in stock

5/16" x 1" BSC Bolt and Nut - Stainless Steel: Pack of 4

Product no.: 0488 0316100BTNTSS
£14.00 *
In stock

1/4" BSC Machined Nut - Stainless: Pack of 10

Product no.: 0490 0250FNSS

Pack of 10 1/4" BSC stainless steel nuts - higher quality 'Full nut' than most commercial types 

£10.50 *
In stock

1/4" BSF Forged Nut - Stainless: Pack of 10

Product no.: 0490F 0250FORG

Pack of 10 1/4" BSF stainless steel nuts - commercially available forged type, fractionally smaller width than our 'full nut' type, but often better for smaller bolts and cheaper than the full nuts.  same TPI as BSC bolts and interchangeable

£7.00 *
In stock
*
Recommended Retail Price, plus delivery
31 - 60 of 90 results