Cambox Main (Front) Bearing - SOHC Camshaft Front Ball Bearing: RHP or SKF Brand: Each

Product no.: 0026 A11/785

In stock

£57.00
Recommended Retail Price, plus delivery


- Single row ball bearing. Fitted to all SOHC engines, both International and early Manx. 

These are either high quality RHP or SKF bearings -dependent on availability at the time - but both these manufacturers supply bearings of the highest quality. 

Orginally fitment for this front cambox bearing would have been 'C3' looser fit bearings - but those are now unobtainable, and often were not r-fitted once changed anyway.  These are the 'standard' fit type, but this should not really make a great deal of difference on this bearing - just give it a little more time to run in after fitting.  It is far better to fit good quality RHP/SKF bearings - than an inferior quality non UK bearing.

Note:  It us not unusual when stripping both SOHC and DOHC Manx Norton engines (i.e. racing engines) to find a slot ground into the outer race of this bearing, approximately 1/16" deep.  Then when fitting the 3 screw plate over this bearing on assembly - a screwdriver used to punch an indent on the bearing plate that corresponds with this slot.  This is done to make sure there is no chance of the bearing spinning in the housing.  Although I cannot advocate this being good engineering practice . . . I know I do it on all my engines built for racing!- also on main bearings (if you do do it - make sure you cover bearing with cling film or similar first, so nothing gets in bearing).  

Customers who bought this product also bought

*
Recommended Retail Price, plus delivery

Browse these categories as well: 1.b Norton SOHC, OHV and Side Valve Bearings, 1.d Norton SOHC Cambox