1.m Handlebars, Controls, Cables

1.m Handlebars, Controls, Cables

1.m Handlebars, Controls, Cables
This section lists control fittings such as handlebars, brake and clutch levers, cable fitings etc

Display per page
Sort by
46 - 57 of 57 results

Rev Clock/Speedo (Chronometric) Back Screws (Pair)

Product no.: 0636 Speedo_11

Pair of screws used to secure the internal mechanism of Smiths Chronometric Rev Clocks and Speedo's to the case.  

£2.40 *
In stock

Smiths type 80mm Screw on Chronomatic Flanged Top Ring - Chromed

Product no.: 0637 Speedo_12

Smiths type 80mm Screw on Chronomatic Flanged Top Ring - Chromed, to fit those Speedos that are mounted in nacelles.

£18.00 *
In stock

80mm Chronnometric Rev Clock Case (no illumination) for Smiths Rev Clock

Product no.: 0638 Speedo_13

High quality reproduction 80mm Chronnometric Rev Clock Case (no illumination) for Smiths Rev Clock

£26.00 *
In stock

Rev Clock/Speedo (Chronometric) Pointer - Early Type with Through Hole

Product no.: 0643 Speedo_14

Chronometric speedometer or rev clock Needle - early type with through hole 

£15.00 *
In stock

Rev Clock/Speedo (Chronometric) Front Gasket

Product no.: 0644 Speedo_15

This is the paper gasket that fits behind face of Smiths rev clocks/speedos - as originally manufactured

£2.50 *
In stock

Rev Clock/Speedo (Chronometric) Black Face Retaining Screws - Pack of 4

Product no.: 0646 Speedo_17

Chronometric speedometer or rev clock - Black face retaining screws - pack of 4 

£5.00 *
In stock

Rev Clock/Speedo (Chronometric) Back Gasket

Product no.: 0645 Speedo_16

This is the paper gasket that fits at the back of Smiths rev clocks/speedos, between the mechanism and the case - as originally manufactured

£2.50 *
In stock

Rev Clock/Speedo (Chronometric) Black Face Retaining Screws - Each

Product no.: 0647 Speedo_18

Chronometric speedometer or rev clock - Black face retaining screws - Each

£1.50 *
In stock

Telescopic (Es-Way Replica) Prop Stand

Product no.: 0615 Stand3

This is a beautifully made copy of the original pre-war Es-Way telescopic prop stand - a great add on for any 1920's-1950's British rigid (and possibly plunger) motorcycle and a period piece that would like great and in keeping on your roadgoing Norton International - or any rigid Norton for that matter!  

£145.00 *
In stock

OHV/SV/Dominator Rigid/Gardengate/Swing Arm: Brake Pedal Pivot Bolt and Nut

Product no.: 0652 A2/502

Stainless Steel rear brake pedal pivot bolt and nut to fit OHV and Side Valve siingle cylinder models, and all pre Featherbed roadgoing models.  This is the pivot bolt that screws into the frame from which the rear brake pedal pivots

£24.00 *
In stock

SOHC International Model 30/40: Brake Pedal Pivot Bolt and Nut

Product no.: 0653 A11/502

Stainless Steel rear brake pedal pivot bolt and nut to fit SOHC International models (Model 30 and Model 40) for Rigid and Gardengate framed models. This is the pivot bolt that screws into the frame from which the rear brake pedal pivots

£24.00 *
In stock

SOHC M30 (Gardengate Manx type): Brake Pedal Pivot Bolt and Nut

Product no.: 0654 A11/502M

Stainless Steel rear brake pedal pivot bolt and nut to fit SOHC M30/M40 (i.e. pre-Featherbed Manx type) for Rigid and Gardengate framed models. This is the pivot bolt that screws into the frame from which the rear brake pedal pivots

£24.00 *
In stock
*
Recommended Retail Price, plus delivery
46 - 57 of 57 results