1.j Norton Chassis and Fabricated Parts

1.j Norton Chassis and Fabricated Parts

1.j Norton Chassis and Fabricated Parts
This section includes many chassis parts, including lasercut engine plates and other hard to find items, particularly for SOHC International and Manx parts

Display per page
Sort by
46 - 65 of 65 results

Norton Single Front Frame Engine Bolt Washer - Pair

Product no.: 0463 11809

Lasercut and then dull nickel plated washers to fit the 0.5" front engine bolt (i.e. the bolt that secures the front engine plates to the frame down tube). Normal 0.5" commercially available washers are too wide, these are much closer to the original washers. Price is for a pair of washers

£2.00 *

Propstand

Product no.: 0479 A2/360
Cheap and cheerful reproduction of a proprietary British propstand. This type of propstand would normally clamp to the lower gearbox to rear wheel frame rail. When I have fitted these in the past I have considered drilling and piinning them, to ensure they cannot rotate around the frame tube
£29.00 *

Reduced Head Racing Mudguard/Number Plate Bolts - Pack of 4

Product no.: 0483 0250MDGD1

These 1/4" x 0.750" stainless steel bolts (supplied with nut and washers) have a head reduced to the absolute minimum and slight 5/16" shoulder on the shaft, which allows a 5/16" washer to be fitted - which provides a wider surface area than if a 1/4" washer was used - which is better for use with flattened mudguard stays and when fitting racing number plates. Sold as a pack of 4

£14.00 *

Girling Shock Absorber Spring Retaining Clips - Stainless Steel

Product no.: 0560 GIRL001
An unusual item this - but these are good quality stainless steel clips that are used to retain the springs on Girling classic shock absorbers - as fitted to Featherbed Manx Nortons and most Norton swinging arm/Featherbed models from the mid 1950's onwards. These were made specially for me by the same manufacturer that makes many of my fabricated Norton parts and are very good quality. Being stainless steel they do not rust and can be polished, adding a nice touch. Price is for pack of 4 clips to fit a pair of shock absorbers
£16.00 *

2BA x 7/8" Cheesehead Screws for Handlebar/Electrical Controls - Bar Turned - Pack of 4

Product no.: 0335 2BASS78

2 BA x 7/8" CNC bar turned Stainless Steel Cheesehead Screws - pack of 4. Common size for handlebar fittings such as the smaller electrical switch's.  These items are CNC bar turned 

£6.80 *
In stock

Tax Disc Holder : Halycon Type - Stainless Steel

Product no.: 0582 TaxDisc1

Classic 'Halycon' Style Tax Disc Holder, this model being in Stainless Steel so it will not tarnish or rust.  

Although it is no longer a legal requirement to fit tax disc's, all historic bikes would have originally been fitted with them - so in my view, no restoration would be complete without fitting a tax disc holder - and I use this type on some of my bikes.

Update Jan 2016:  To go with these tax disc holders, I will soon be able to offer facsimile historic Tax Discs which will be tailored to include your own bike details.  I am hoping eventually to have these available for all years from the 1930's - to 1970's.  For the moment, I am able to offer 1961,1962,1972 - see photograph 3 for an example using one of my own bike details.  Please email for details if you require a facsimile tax disc 

£8.50 *
In stock
can be shipped within 10 days

Front Number Pate

Product no.: 0584 A2/531

Front Number plate, painted with a black finish.

This number plate has a sporty rake on on one side (which would be facing the rear of the bike.  However - if you prefer the symetric shape that was adoped on some bikes (i.e. the Vincent used a symetric front number plate commonly), then it is a simple job to copy the shape of the other end onto a cardboard template and then use this as a template to help cut away the 'rake' part on the other end, leaving a symetric style plate.  I have done this with one of these plates when fitting one to my Vincent Comet restoration

£8.50 *
In stock
can be shipped within 10 days

1BA x 7/8" Cheesehead Screws for Handlebar Controls - Bar Turned - Pack of 4

Product no.: 0250 1BASS78

1 BA x 7/8" CNC bar turned Stainless Steel Cheesehead Screws - pack of 4. Most common size for handlebar fittings and other smaller fittings such as electrical. These items are CNC bar turned 

£6.80 *
In stock

Telescopic (Es-Way Replica) Prop Stand

Product no.: 0615 Stand3

This is a beautifully made copy of the original pre-war Es-Way telescopic prop stand - a great add on for any 1920's-1950's British rigid (and possibly plunger) motorcycle and a period piece that would like great and in keeping on your roadgoing Norton International - or any rigid Norton for that matter!  

£145.00 *
In stock

OHV/SV/Dominator Rigid/Gardengate/Swing Arm: Brake Pedal Pivot Bolt and Nut

Product no.: 0652 A2/502

Stainless Steel rear brake pedal pivot bolt and nut to fit OHV and Side Valve siingle cylinder models, and all pre Featherbed roadgoing models.  This is the pivot bolt that screws into the frame from which the rear brake pedal pivots

£24.00 *

SOHC International Model 30/40: Brake Pedal Pivot Bolt and Nut

Product no.: 0653 A11/502

Stainless Steel rear brake pedal pivot bolt and nut to fit SOHC International models (Model 30 and Model 40) for Rigid and Gardengate framed models. This is the pivot bolt that screws into the frame from which the rear brake pedal pivots

£24.00 *
In stock

SOHC M30 (Gardengate Manx type): Brake Pedal Pivot Bolt and Nut

Product no.: 0654 A11/502M

Stainless Steel rear brake pedal pivot bolt and nut to fit SOHC M30/M40 (i.e. pre-Featherbed Manx type) for Rigid and Gardengate framed models. This is the pivot bolt that screws into the frame from which the rear brake pedal pivots

£24.00 *
In stock

7/16" Stainless Steel Engine Bolt Washer - Reduced Outer Diameter: Bag of 10

Product no.: 0661 7_16_ROD

7/16" Stainless Steel Engine Bolt Washers, but with Reduced Outer Diameter, which are correct for Norton 7/16" engine bolts as used on SOHC engines: Price is for bag of 10

£2.30 *

1/12" Stainless Steel Engine Bolt Washer - Reduced Outer Diameter: Bag of 6

Product no.: 0662 1_2_ROD

1/2" Stainless Steel Engine Bolt Washers, but with Reduced Outer Diameter, which are correct for the front Norton 1/2" engine/frame bolt as used on SOHC engines (as well as other 1/2" bolts where you do not want to fit a standard wide type washer : Price is for bag of 6

£2.50 *
In stock

All Norton Pre-Featherbed Models - Head Race Bearing - Ball Sets

Product no.: 0217 A2/521

- Full set of headrace balls - both top and bottom race - to fit all Norton single frames - 34 balls in all, plus one spare in case you drop one!, 34 + 1 = 35.

£14.00 *

3/8" Stainless Steel Engine Bolt Washer - Reduced Outer Diameter: Bag of 10

Product no.: 0694 3_8_ROD

3/8" Stainless Steel Engine Bolt Washers, but with Reduced Outer Diameter, which are correct for some Norton 3/8" engine bolts as used on SOHC engines: Price is for bag of 10

£1.90 *
In stock

7/16" Stainless Steel Spring Washer (Alternative Reduced O/D Engine Bolt Washer) : Bag of 10

Product no.: 0695 SW005

7/16" Stainless Steel Engine Bolt Spring Washers.  Alternative to item 0661 - Reduced Outer Diameter plain washers.  Used on Norton 7/16" Engine Bolts with reduced hex heads as used on SOHC engines: Price is for bag of 10

£2.10 *
In stock

1/4" BSF Forged Nut - Stainless: Pack of 10

Product no.: 0490F 0250FORG

Pack of 10 1/4" BSF stainless steel nuts - commercially available forged type, fractionally smaller width than our 'full nut' type, but often better for smaller bolts and cheaper.  same TPI as BSC bolts and interchangeable

£5.00 *
In stock

1/4" BSC Full Nut - Stainless: Pack of 10

Product no.: 0490 0250FNSS

Pack of 10 1/4" BSC stainless steel nuts - higher quality 'Full nut' than most commercial types 

£7.50 *
In stock

1/4" x 5/8" BSC Bolt and Nut - Stainless Steel: Pack of 6

Product no.: 0479b 025058BTNTSS
£8.00 *
In stock
*
Recommended Retail Price, plus delivery
46 - 65 of 65 results