3. BTH/Lucas Magneto/Electrical Parts

3. BTH/Lucas Magneto/Electrical Parts

3. BTH/Lucas Magneto/Electrical Parts
BTH KD1 Magneto Parts

Display per page
Sort by
46 - 76 of 76 results

BTH Label Rivet - Oversize Brass (Pair)

Product no.: 0468 KD1 030
This item listing is for a pair (two) brass 2mm x 4mm round head rivets, for use when fitting new BTH KD1 serial number or competition plates (see Items 0369/0370/0371 for these). The normal original size of BTH rivet was 1.6mm x 3mm (see item number 0469 for these), but often in removing these the hole is opened slightly, hence these slighlty oversize rivets. These rivets are brass, and slightly harder than the similar aluminum oversize rivets (item 0467) which we also sell. If not sure, it is a good idea to buy a set of both
£1.80 *

BTH Label Rivet - Std Size Stainless Steel (Pair)

Product no.: 0469 KD1 031
This item listing is for a pair (two) stainless steel 1.6mm x 3mm round head rivets, for use when fitting new BTH KD1 serial number or competition plates (see Items 0369/0370/0371 for these). This was the normal original size of BTH rivets, so was a direct replacement. If you have had to drill out the original rivet, and are worried it may now be oversize - then we also sell oversize rivets either aluminium (item 0467) or brass (item 0468). If not sure, it is a good idea to buy a set of both
£1.80 *

BTH KD1 (and Lucas) Rubber Cable Shroud

Product no.: 0372 KD1 027
Rubber cable shroud to stop water running down the advance\retard cable and into the mechanism. This shroud is of the type fitted to BTH KD1 magnetos, but is also very similar to the Lucas variety as well (and can be used on both)
£3.20 *

Lucas MT110 Rear Light Unit with Stoplamp

Product no.: 0403 MT110

This replica Lucas MT110 light unit was standard fitment on the Norton International through the 1930's/ It is fitted with a twin filament Rear Light/Stop Light bulb as well - which on modern roads I think is essential. Although made by a proprietary supplier (and probably made in China), I have to say I was really impressed by the quality of this unit, it looks very nice. 

£22.00 *
In stock

Lucas 477/1 Rear Light Unit with Stoplamp

Product no.: 0404 477/1

Although I have not been able to find reference to this unit being fitted to the International (see also my listing for the MT110 unit), it is a well known Lucas fitment of the 30's-40's era, and I am sure would have been sometimes fitted. It is fitted with a twin filament Rear Light/Stop Light bulb as well - which on modern roads I think is essential. 

£24.00 *
In stock

Miller 'Stop' Rear Light Unit

Product no.: 0441b VStop

Lovely reproduction of the distinctive Miller 'STOP' rear light unit, as fitted to Vincent road bikes as well as a few others of the immediate Post-War period. So nice you might want to consider fitting it to your Norton! (I have one fitted to my Vincent Comet)

£18.00 *

Lucas Mag/Dyno Dynamo Wiring Shroud

Product no.: 0428 LUC008
Reproduction rubber shroud that fits over the input wires into Lucas Dynamo on all pre-alternator Norton singles
£2.30 *

Cable Tie:3.5" Wobbly Type - Pack of 5

Product no.: 0431 CTIE01
Reproduction 3.5" rubber cable tie, of the 'wobbly' type. suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 5. (Note: this particular type does sometimes have slight rubber flashing, easily cut away with a pair of nail scissors)
£4.50 *

Cable Tie: John Bull Type, Size A - Pack of 5

Product no.: 0432 CTIE02
Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'A' (also inscribed on cable tie) which are 3 3/4" long . suitable for securing wiring and cables on the smaller frame tubes. Sold as a pack of 5. For the larger Norton frame tubes, it is easiest to 'mix and match' these cable ties with the other sizes to make 'tandem' cable ties (i.e. two cable ties joined together), dependent on how many cables or wires you are trying to secure
£6.00 *

Cable Tie: John Bull Type, Size B - Pack of 5

Product no.: 0433 CTIE03
Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'B' (also inscribed on cable tie) which are 4 1/2" long . suitable for securing wiring and cables on the smaller and medium frame tubes. Sold as a pack of 5. For the larger Norton frame tubes, it is easiest to 'mix and match' these cable ties with the other sizes to make 'tandem' cable ties (i.e. two cable ties joined together), dependent on how many cables or wires you are trying to secure
£6.50 *

Cable Tie: John Bull Type, Size C - Pack of 5

Product no.: 0434 CTIE04
Reproduction cable tie, of the John Bull 'parrallel' type, which has 'John Bull' name on the moulding. This item is for Size 'C' (also inscribed on cable tie) which are 5 1/4" long . suitable for securing wiring and cables on the medium and larger frame tubes. Sold as a pack of 5. For the larger Norton frame tubes, it is easiest to 'mix and match' these cable ties with the other sizes to make 'tandem' cable ties (i.e. two cable ties joined together), dependent on how many cables or wires you are trying to secure
£7.00 *

Rubber Base Mat For Lucas Battery

Product no.: 0435 LUC009
Rubber base pad to fit under the Lucas 'hard rubber' style batteries. Ever since the first time I worked on a bike my father always taught me to fit a piece of rubber under the battery to help prevent it cracking - well this pad was made just for that purpose! This pad is 5 3/4" x 3 1/2" dimensions - which is actually meant for the mid 1950's-1960's Lucas type batteries, but can also be used on the earlier narrower type Lucas batteries often fitted to Norton's on rigid and plunger framed versions, simply by trimming an inch or so off one side. (Note: if you have a 'T' shaped battery and battery carrier you do not need to fit this type of mat)
£3.50 *

Lucas/Miller Light Switch Insulating Wire Surround

Product no.: 0436 LUC010
This is the rubber shield that fits around the wires on the back of the Lucas (or Miller) headlidght switch in the headlamp shell, to ensure the exposed connectors are protected and insulated.
£1.80 *

Lucas HT Lead Cover/Short Cable Shroud

Product no.: 0437 LUC011
Similar to part 0372 except shorter, this shroud is listed by my supplier as a Lucas HT Lead shroud, but also looks very similar to the competition type Lucas/BTH magneto cable shroud, so could be used for either purpose
£2.10 *

Lucas Headlamp Rim Securing Clamp and Screw

Product no.: 0438 LUC012

This is the pressed steel clip and screw that is used on Lucas headlight rims, to secure the rim to the headlamp shell. Sorry, but the screw has got a Posi-drive '+' style head, not a slotted head, which would be more correct for 30's/40's style headlamps.

£3.00 *
In stock

Headlamp Shell Retaining Clips

Product no.: 0439 LUC013
Pack of 5 headlamp shell retaining clips, retains headlamp reflector shell to the headlamp rim. For Lucas headlamps, but am sure would fit Miller as well
£3.50 *

Rubber Shroud For protecting Frame Tubes

Product no.: 0440 RClamp1
These interesting little hard rubber discs are formed in a curved shape so they can be used on smaller frame tubes and handlebars for either protecting paintwork from rubbing or protecting wiring/cables. Although they are solid, on the inside there are two indents so they can be easily drilled for threading through a plastic tie down clip. Sold in packs of 3
£1.50 *

Slotted Screw Securing Lucas Dynamo To Magneto (Magdyno) - Stainless Steel

Product no.: 0454 200569

As the description implies, this is the special slotted nut/screw that was used to secure the Lucas dynamo to the magneto (Lucas Mag/Dyno's) fitted to all Norton road-going models from 1930's to 1950's. This screw is very nicely made and identical to original, but in stainless Steel

£6.00 *

Brass Wiring Bullets - Pack of 10

Product no.: 0455 Wiring01
Pack of 10 brass bullets, for use when making up wiring harnesses. Can be used in conjunction with the rubber bullet connectors - Item 0456 and 0457
£2.50 *

Single Bullet Connectors - Pack of 5

Product no.: 0456 Wiring02
Pack of 5 black rubber style bullet connectors. Traditional style bullet connectors as used on all Norton wiring harnesses 1930's - 1960's
£1.30 *

Double Bullet Connectors - Pack of 5

Product no.: 0457 Wiring03
Pack of 5 black rubber style double bullet connectors. Traditional style bullet connectors as used on all Norton wiring harnesses 1930's - 1960's
£1.70 *

Altette 6v HF1234 Horn (Reproduction)

Product no.: 0471 HF1234
Good quality (UK sourced) reproduction of the famous Altette Model HF1234 6 volt horn, as fitted to all Norton roadgoing singles from the 1930's through to the 1950's. Cast iron body, and when I plugged one up to a battery made a good sound, just like the original. I will shortly be fitting one of these to one of my own bikes. Note: this horn is 6 volt, as per original Norton, however, I can also obtain a 12 volt version by special order
£97.00 *

Altette Horn Mounting Bracket

Product no.: 0472 HF1234MB

Mounting bracket for mounting Altette horn on the chassis. I particularly like this item as it has the correct diamond shaped reinforcing plate around the mounting hole, unlike some cheaper copies I have seen

£9.50 *
In stock

Lucas 31482A Dip Switch (Diamond type)

Product no.: 0473 31482A

Good quality reproduction of the Lucas 31482A type dip switch, as was original fitment on all Norton singles (including SOHC International) from mid 1930's to late 1940's, with correct diamond shape switch (not round)

£25.00 *
In stock

Lucas LU6204 7/8" Horn Button

Product no.: 0474 LU76204
Good quality reproduction of the Lucas LU6204 type chromed horn button, to fit 7/8" diameter handlebars, as was original fitment on Norton singles (including SOHC International) from 1930's - 1950's.
£9.50 *

Lucas LU6204 1" Horn Button

Product no.: 0475 LU76204A
Good quality reproduction of the Lucas LU6204A type chromed horn button. The same as item 0473 except this one is to fit earlier 1" diameter handlebars, as was original fitment on Norton singles (including SOHC International) in the mid 1930's
£9.50 *

Lucas 31340 Headlamp Switch

Product no.: 0476 31340
Good quality reproduction of the Lucas Type U39 31340 Headlamp switch, as was original fitment on all Norton singles (including SOHC International) from mid 1930's to mid 1950's, Switch has 3 positions - 'OFF', 'L', 'H'. Note, some later Norton's were fitted with the same switch with a longer switch handle, we can also supply these by special order.
£18.50 *

Lucas 5033234 Brake Light Switch

Product no.: 0477 5033234
Good quality reproduction of the Lucas Type 5033234 Brake Light switch, as was original fitment on Norton singles (including SOHC International) late 1940's to mid 1950's, I can remember removing an original one of these from my first 1950's ES2.
£12.50 *

Solid State Regulator (V-Reg-2a)

Product no.: 0574 33018_SS

This product listing is for an excellent quality modern 'Solid State' dynamo regulator which can be used to replace original 'insides' of the notoriously unreliable Lucas 33018a type mechanical regulator, fitted to most Norton single roadgoing models both pre and post war.  

£65.00 *
In stock
can be shipped within 10 days

Lucas B38-6 (Large Rubber Style) Battery Box - PU7D

Product no.: 0577 B386

This is a genuine Lucas - empty battery box of the large rubber (B38-6) type - which is the type of 6v battery originally fitted to a number of british bikes of the 40's/50's/60's - including both Norton and Vincent singles.  It was also not unusual to fit this type of battery to Norton singles of the 1930's, as a replacement for earlier T-Shape batteries which were discontinued after WWII.

This empty battery box is a modern (hard rubber) replica of the original Lucas type (but still manfactured by Lucas), but does not have any battery inside it - instead it is ready to take a modern 'gell cell' battery.  In the 3rd and 4th photograph I show one of those modern dry cell batteries (not included) - which will fit snugly in the case.  Note:  I may shortly be offering thes dry cell battery for sale as well, email for details when placing order if you would like to order one

£26.50 *
In stock
can be shipped within 10 days

Reproduction Lucas Dynamo Bakelite Cover (1937 - @1953 models)

Product no.: 0616 LUC014

Reproduction of the black bakelite cover fitted to Lucas Magdyno Dynalmo's of the CVC/2 brush type that were typically fitted to all Norton roadgoing models from approximately 1937 - to the early 1950's.

£11.00 *
In stock
*
Recommended Retail Price, plus delivery
46 - 76 of 76 results