1.f Norton SOHC Timing Case & Crankcase Parts

1.f Norton SOHC Timing Case & Crankcase Parts

1.f Norton SOHC Timing Case & Crankcase Parts
Norton SOHC Timing Case and Crankcase Parts

Display per page
Sort by
61 - 76 of 76 results

Norton SOHC - Crankcase Bevel Pressure Release Pipe (Breather Pipe)

Product no.: 0627 A11/717

Breather Pipe (listed in Norton 1948 catalog as Pressure Release Pipe) and 1/4" BSP union nut to fit bevel chamber of all SOHC models (30/40, M30/M40 etc)

£9.00 *
In stock

Norton SOHC - Crankcase Bevel Pressure Release Pipe (Breather Pipe) - Long

Product no.: 0628 A11/717L

Breather Pipe (listed in Norton 1948 catalog as Pressure Release Pipe) and 1/4" BSP union nut to fit bevel chamber of all SOHC models (30/40, M30/M40 etc)

£10.00 *
In stock

Norton SOHC - Rocker Box Feed Pipe - Complete

Product no.: 0629 A11M/789

Complete Cambox Feed pipe and 1/4" BSP union nut's to fit all SOHC models (30/40, M30/M40 etc) - pipe length can be adjusted

£25.00 *

Norton SOHC - M30 Front Crankcase Breather Pipe - Long Type

Product no.: 0630 A11M/720b

Breather pipe to fit breather union of type fitted to the front of drive side crankcase - most commonly fitted to magnesium M30 (and early pre-Featherbed Manx) crankcases 

£16.00 *

Norton SOHC - Crankcase Feed Pipe To Cambox

Product no.: 0631 A11M/789b

Crankcase feed pipe to cambox and 1/4" BSP union nut's to fit all SOHC models (30/40, M30/M40 etc) - this is the bottom piece of the cambox feed pipe assembly - which we offer here to be purchased seperately

£8.00 *

Lockwire - 12" length of Stainless Steel Lockwire

Product no.: 0632 Lckwre1

Lockwire:  12"/(approx) 300mm length of Goodrich stainless steel lockwire, for lockwiring breather pipes

£0.90 *
In stock

Cambox Feed Pipe Assembly - Black 5/16 Oil Pipe (4.5" / 110mm Length)

Product no.: 0633 BrthrPipe1

Black (original rubber style) 5/16" oil reistent pipe for cambox feedpipe assembly - 4.5"/110mm length

£1.60 *
In stock

Black 5/16" Oil Pipe/Breather Pipe - 3ft / 900mm Length

Product no.: 0634 BrthrPipe2

Black (original rubber style) 5/16" oil reistent pipe for use for oil breather pipes, oil pipes (or even big bore fuel pipes if required - although 1/4" bore pipe is more normally used) - 3 foot /900mm length

£10.50 *
In stock

Norton Single Front Frame Engine Bolt Washer - Pair

Product no.: 0463 11809

Lasercut and then dull nickel plated washers to fit the 0.5" front engine bolt (i.e. the bolt that secures the front engine plates to the frame down tube). Normal 0.5" commercially available washers are too wide, these are much closer to the original washers. Price is for a pair of washers

£2.00 *

Black 5/16" Oil Pipe/Breather Pipe - 3ft / 900mm Length (non-Ethanol)

Product no.: 0634b BrthrPipe4

Black (original rubber style) 5/16" oil reistent pipe for use for oil breather pipes, oil pipes (or even big bore fuel pipes if required - although 1/4" bore pipe is more normally used) - 3 foot /900mm length

£9.00 *
In stock

New SOHC M30/M40 (i.e. for early Manx) Driveside Mainshaft Outer Oil Spacing Ring(s)

Product no.: 0656 A10/33

- These are the Bearing Spacer(s) that fits between the two driveside main bearings on M30/M40 magnesium crankcase pre-Featherbed crankcases

£29.00 *
In stock
can be shipped within 10 days

New SOHC M30/M40 (i.e. for early Manx) Driveside Mainshaft Inner Bearing Spacer(s)

Product no.: 0657 A11M/835

- These are the inner bearing spacer(s) that fits between the two driveside main bearings on M30/M40 magnesium crankcase pre-Featherbed crankcases - they are the correct width to ensure the inner roller race of the innermost bearing should just be held off the lipped outer roller bearing race

£18.00 *
In stock
can be shipped within 10 days

7/16" Stainless Steel Engine Bolt Washer - Reduced Outer Diameter: Bag of 10

Product no.: 0661 7_16_ROD

7/16" Stainless Steel Engine Bolt Washers, but with Reduced Outer Diameter, which are correct for Norton 7/16" engine bolts as used on SOHC engines: Price is for bag of 10

£2.00 *
In stock

1/12" Stainless Steel Engine Bolt Washer - Reduced Outer Diameter: Bag of 6

Product no.: 0662 1_2_ROD

1/2" Stainless Steel Engine Bolt Washers, but with Reduced Outer Diameter, which are correct for the front Norton 1/2" engine/frame bolt as used on SOHC engines (as well as other 1/2" bolts where you do not want to fit a standard wide type washer : Price is for bag of 6

£2.50 *
In stock

New SOHC International 30/40 Driveside Mainshaft Outer Oil Spacing Ring

Product no.: 0663 A11/33

- This is the Bearing Spacerthat fits between the two driveside main bearings on SOHC International 30/40 (and CS1/CJ))  crankcases

£22.00 *
In stock
can be shipped within 10 days

New SOHC International 30/40 Driveside Mainshaft Inner Bearing Spacer

Product no.: 0664 A11/835

- This is the inner bearing spacer that fits between the two driveside main bearings on International 30/40 and CS1/CSJ aluminium-crankcases engines - they are the correct width to ensure the inner roller race of the innermost bearing should just be held off the lipped outer roller bearing race

£11.00 *
In stock
can be shipped within 10 days
*
Recommended Retail Price, plus delivery
61 - 76 of 76 results