1.d Norton SOHC Cambox

1.d Norton SOHC Cambox

1.d Norton SOHC Cambox
Norton SOHC Cambox and Rocker parts

Display per page
Sort by
61 - 70 of 70 results

Norton SOHC - Crankcase Feed Pipe To Cambox

Product no.: 0631 A11M/789b

Crankcase feed pipe to cambox and 1/4" BSP union nut's to fit all SOHC models (30/40, M30/M40 etc) - this is the bottom piece of the cambox feed pipe assembly - which we offer here to be purchased seperately

£8.00 *
In stock

Lockwire - 12" length of Stainless Steel Lockwire

Product no.: 0632 Lckwre1

Lockwire:  12"/(approx) 300mm length of Goodrich stainless steel lockwire, for lockwiring breather pipes

£0.90 *
In stock

Cambox Feed Pipe Assembly - Black 5/16 Oil Pipe (4.5" / 110mm Length)

Product no.: 0633 BrthrPipe1

Black (original rubber style) 5/16" oil reistent pipe for cambox feedpipe assembly - 4.5"/110mm length

£1.60 *
In stock

Black 5/16" Oil Pipe/Breather Pipe - 3ft / 900mm Length

Product no.: 0634 BrthrPipe2

Black (original rubber style) 5/16" oil reistent pipe for use for oil breather pipes, oil pipes (or even big bore fuel pipes if required - although 1/4" bore pipe is more normally used) - 3 foot /900mm length

£10.50 *
In stock

Black 5/16" Oil Pipe/Breather Pipe - 3ft / 900mm Length (non-Ethanol)

Product no.: 0634b BrthrPipe4

Black (original rubber style) 5/16" oil reistent pipe for use for oil breather pipes, oil pipes (or even big bore fuel pipes if required - although 1/4" bore pipe is more normally used) - 3 foot /900mm length

£9.00 *
In stock

SOHC Crankcase Union/Cambox Union/Breather Union (straight thru)

Product no.: 0248b A11/719

This is a faithful reproduction of the straight through union fitted to SOHC (and DOHC) cambox's for connecting the cambox oil feed pipe (fitted at top of crankcase and cambox), but also used as a front crankcase breather on many Inters and magnesium racing engines.  Finally it is also fitted as a breather union on the bevel chamber of magnesium racing crankcases behind the inner timing cover (while Inter crankcases instead employ a pressure telltale unit).  Copied from an original pre-war item

 

£8.00 *

Crankcase Breather (straight thru) - AF

Product no.: 0248c A11/719-AF

This is modern replacement for the straight thru breather used on Norton crankcases and timing cases - but uses AF Hex (not Whitworth) - if you are not worried about originality!

£4.00 *

Crankcase Breather - Fibre Washer

Product no.: 0249 A11/719FW

Surprisingly it is very difficult to find good quality vulcanised (red fibre) washers to fit 1/4"BSP fittings. These red fibre washers are of the highest quality (from a specialist manufacturer) and have just the right external diameter - but are a very tight fit on the thread. To fit them I place the breather (or similar 1/4" BSP fitting) in soft jaw vice, then place these washers just onto the thread - then I carefully use a pair of large pliers (the circular hole with coarse teeth) to carefully wind them onto the thread. Although this is difficult - the result is the correct size washer that does not look out of place under a Norton breather (unlike many modern ones that are far too wide and look out of place). These are high quality washers from a top manufacturer - sold in pack of 5. Note: do not buy if you are worried you might not be able to fit them!!

£2.10 *

Norton SOHC - Crankcase One Way Valve Breather Pipe - For Inter With Chaincases

Product no.: 0681 A11/476

Crankcase drive side breather pipe that fits on one way valve on SOHC road going International models with Norton oilbath chaincease fitted, includes lockwire for fitting black oil pipe, (if required)  

£8.00 *
In stock

Norton SOHC - International Oil Tank Top Breather Pipe

Product no.: 0682 A11/298

Norton International oil tank top breather pipe.  This pipe was original fitment on the top of half wrapround International oil tanks, feeding the breather pipe over the frame saddle tube. Includes lockwire for fitting black oil pipe (if required).

£9.00 *
In stock
*
Recommended Retail Price, plus delivery
61 - 70 of 70 results